diff options
Diffstat (limited to 'include/configs/smdk6400.h')
| -rw-r--r-- | include/configs/smdk6400.h | 116 |
1 files changed, 58 insertions, 58 deletions
diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index ea65c0e..1784cc6 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -40,7 +40,7 @@ #define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */ #define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */ -#define CFG_SDRAM_BASE 0x50000000 +#define CONFIG_SYS_SDRAM_BASE 0x50000000 /* input clock of PLL: SMDK6400 has 12MHz input clock */ #define CONFIG_SYS_CLK_FREQ 12000000 @@ -68,8 +68,8 @@ /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for initial data */ /* * Hardware drivers @@ -83,9 +83,9 @@ */ #define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK6400 */ -#define CFG_HUSH_PARSER /* use "hush" command parser */ -#ifdef CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #endif #define CONFIG_CMDLINE_EDITING @@ -126,22 +126,22 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "SMDK6400 # " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE 384 /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "SMDK6400 # " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START CFG_SDRAM_BASE /* memtest works on */ -#define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x7e00000) /* 126MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x7e00000) /* 126MB in DRAM */ -#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* default load address */ +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default load address */ -#define CFG_HZ 1000 +#define CONFIG_SYS_HZ 1000 /* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /*----------------------------------------------------------------------- * Stack sizes @@ -171,30 +171,30 @@ /* SMDK6400 has 2 banks of DRAM, but we use only one in U-Boot */ #define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CFG_SDRAM_BASE /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB in Bank #1 */ -#define CFG_FLASH_BASE 0x10000000 -#define CFG_MONITOR_BASE 0x00000000 +#define CONFIG_SYS_FLASH_BASE 0x10000000 +#define CONFIG_SYS_MONITOR_BASE 0x00000000 /*----------------------------------------------------------------------- * FLASH and environment organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ /* AM29LV160B has 35 sectors, AM29LV800B - 19 */ -#define CFG_MAX_FLASH_SECT 40 +#define CONFIG_SYS_MAX_FLASH_SECT 40 #define CONFIG_AMD_LV800 -#define CFG_FLASH_CFI 1 /* Use CFI parameters (needed?) */ +#define CONFIG_SYS_FLASH_CFI 1 /* Use CFI parameters (needed?) */ /* Use drivers/cfi_flash.c, even though the flash is not CFI-compliant */ #define CONFIG_FLASH_CFI_DRIVER 1 -#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_FLASH_CFI_LEGACY -#define CFG_FLASH_LEGACY_512Kx16 +#define CONFIG_SYS_FLASH_LEGACY_512Kx16 /* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (5 * CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (5 * CFG_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (5 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (5 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ #define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ @@ -205,65 +205,65 @@ #define CONFIG_IDENT_STRING " for SMDK6400" /* base address for uboot */ -#define CFG_PHY_UBOOT_BASE (CFG_SDRAM_BASE + 0x07e00000) +#define CONFIG_SYS_PHY_UBOOT_BASE (CONFIG_SYS_SDRAM_BASE + 0x07e00000) /* total memory available to uboot */ -#define CFG_UBOOT_SIZE (1024 * 1024) +#define CONFIG_SYS_UBOOT_SIZE (1024 * 1024) #ifdef CONFIG_ENABLE_MMU -#define CFG_MAPPED_RAM_BASE 0xc0000000 +#define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000 #define CONFIG_BOOTCOMMAND "nand read 0xc0018000 0x60000 0x1c0000;" \ "bootm 0xc0018000" #else -#define CFG_MAPPED_RAM_BASE CFG_SDRAM_BASE +#define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE #define CONFIG_BOOTCOMMAND "nand read 0x50018000 0x60000 0x1c0000;" \ "bootm 0x50018000" #endif /* NAND U-Boot load and start address */ -#define CFG_UBOOT_BASE (CFG_MAPPED_RAM_BASE + 0x07e00000) +#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_MAPPED_RAM_BASE + 0x07e00000) #define CONFIG_ENV_OFFSET 0x0040000 /* NAND configuration */ -#define CFG_MAX_NAND_DEVICE 1 -#define CFG_NAND_BASE 0x70200010 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x70200010 #define NAND_MAX_CHIPS 1 -#define CFG_S3C_NAND_HWECC +#define CONFIG_SYS_S3C_NAND_HWECC -#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ -#define CFG_NAND_WP 1 -#define CFG_NAND_YAFFS_WRITE 1 /* support yaffs write */ -#define CFG_NAND_BBT_2NDPAGE 1 /* bad-block markers in 1st and 2nd pages */ +#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CONFIG_SYS_NAND_WP 1 +#define CONFIG_SYS_NAND_YAFFS_WRITE 1 /* support yaffs write */ +#define CONFIG_SYS_NAND_BBT_2NDPAGE 1 /* bad-block markers in 1st and 2nd pages */ -#define CFG_NAND_U_BOOT_DST CFG_PHY_UBOOT_BASE /* NUB load-addr */ -#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* NUB start-addr */ +#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_PHY_UBOOT_BASE /* NUB load-addr */ +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* NUB start-addr */ -#define CFG_NAND_U_BOOT_OFFS (4 * 1024) /* Offset to RAM U-Boot image */ -#define CFG_NAND_U_BOOT_SIZE (252 * 1024) /* Size of RAM U-Boot image */ +#define CONFIG_SYS_NAND_U_BOOT_OFFS (4 * 1024) /* Offset to RAM U-Boot image */ +#define CONFIG_SYS_NAND_U_BOOT_SIZE (252 * 1024) /* Size of RAM U-Boot image */ /* NAND chip page size */ -#define CFG_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 /* NAND chip block size */ -#define CFG_NAND_BLOCK_SIZE (128 * 1024) +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) /* NAND chip page per block count */ -#define CFG_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 /* Location of the bad-block label */ -#define CFG_NAND_BAD_BLOCK_POS 0 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 /* Extra address cycle for > 128MiB */ -#define CFG_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_5_ADDR_CYCLE /* Size of the block protected by one OOB (Spare Area in Samsung terminology) */ -#define CFG_NAND_ECCSIZE CFG_NAND_PAGE_SIZE +#define CONFIG_SYS_NAND_ECCSIZE CONFIG_SYS_NAND_PAGE_SIZE /* Number of ECC bytes per OOB - S3C6400 calculates 4 bytes ECC in 1-bit mode */ -#define CFG_NAND_ECCBYTES 4 +#define CONFIG_SYS_NAND_ECCBYTES 4 /* Number of ECC-blocks per NAND page */ -#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) +#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE) /* Size of a single OOB region */ -#define CFG_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_OOBSIZE 64 /* Number of ECC bytes per page */ -#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS) /* ECC byte positions */ -#define CFG_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \ +#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63} @@ -290,10 +290,10 @@ #if !defined(CONFIG_ENABLE_MMU) #define CONFIG_CMD_USB 1 #define CONFIG_USB_OHCI_NEW 1 -#define CFG_USB_OHCI_REGS_BASE 0x74300000 -#define CFG_USB_OHCI_SLOT_NAME "s3c6400" -#define CFG_USB_OHCI_MAX_ROOT_PORTS 3 -#define CFG_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x74300000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "s3c6400" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 #define LITTLEENDIAN 1 /* used by usb_ohci.c */ #define CONFIG_USB_STORAGE 1 |