diff options
Diffstat (limited to 'include/configs/sc520_spunk.h')
| -rw-r--r-- | include/configs/sc520_spunk.h | 250 |
1 files changed, 0 insertions, 250 deletions
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h deleted file mode 100644 index cf5633c..0000000 --- a/include/configs/sc520_spunk.h +++ /dev/null @@ -1,250 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_SKIP_RELOCATE_UBOOT - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_X86 1 /* This is a X86 CPU */ -#define CONFIG_SYS_SC520 1 /* Include support for AMD SC520 */ -#define CONFIG_SYS_SC520_SSI - -#define CONFIG_SYS_SDRAM_PRECHARGE_DELAY 6 /* 6T */ -#define CONFIG_SYS_SDRAM_REFRESH_RATE 78 /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */ -#define CONFIG_SYS_SDRAM_RAS_CAS_DELAY 3 /* 3T */ - -/* define at most one of these */ -#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T -#define CONFIG_SYS_SDRAM_CAS_LATENCY_3T - -#define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */ -#undef CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */ -#undef CONFIG_SYS_SC520_TIMER /* use SC520 swtimers */ -#define CONFIG_SYS_GENERIC_TIMER 1 /* use the i8254 PIT timers */ -#undef CONFIG_SYS_TSC_TIMER /* use the Pentium TSC timers */ -#define CONFIG_SYS_PCAT_INTERRUPTS -#define CONFIG_SYS_NUM_IRQS 16 - -#define CONFIG_SYS_STACK_SIZE 0x8000 /* Size of bootloader stack */ - -#define CONFIG_SHOW_BOOT_PROGRESS 1 -#define CONFIG_LAST_STAGE_INIT 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - - -#define CONFIG_BAUDRATE 9600 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PCI -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_IDE -#define CONFIG_CMD_NET -#define CONFIG_CMD_PCMCIA -#define CONFIG_CMD_EEPROM - - -#define CONFIG_BOOTDELAY 15 -#define CONFIG_BOOTARGS "root=/dev/mtdblock1 console=ttyS0,9600 " \ - "mtdparts=phys:7936k(root),256k(uboot) " -#define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf " \ - "console=ttyS0,9600 " \ - "mtdparts=phys:7808k(root),128k(env),256k(uboot);" \ - "bootp;bootm" - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 1 ... 16 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1024 /* incrementer freq: 1kHz */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 4 banks of DRAM */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - - -#define CONFIG_SPI_EEPROM /* SPI EEPROMs such as AT25010 or AT25640 */ -#define CONFIG_MW_EEPROM /* MicroWire EEPROMS such as AT93LC46 */ -#define CONFIG_DTT_DS1722 /* Dallas DS1722 SPI Temperature probe */ - - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - - -#if 0 -/* Environment in flash */ -#define CONFIG_ENV_IS_IN_FLASH 1 -# define CONFIG_ENV_ADDR (0x387a0000) /* Addr of Environment Sector */ -# define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector (or 0x10000) */ -# define CONFIG_ENV_OFFSET 0 - -#else -/* Environment in EEPROM */ - -# define CONFIG_ENV_IS_IN_EEPROM 1 -# define CONFIG_SPI -# define CONFIG_SPI_X 1 -# define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment EEPROM */ -# define CONFIG_ENV_OFFSET 0x1c00 - -#endif - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=sc520_spunk-0" -#define MTDPARTS_DEFAULT "mtdparts=sc520_spunk-0:-(jffs2)" -*/ - -/*----------------------------------------------------------------------- - * Device drivers - */ -#define CONFIG_NET_MULTI /* Multi ethernet cards support */ -#define CONFIG_EEPRO100 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ - -/************************************************************ - * IDE/ATA stuff - ************************************************************/ -#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */ -#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ -#define CONFIG_SYS_ATA_BASE_ADDR 0 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01f0 /* ide0 offset */ -#define CONFIG_SYS_ATA_IDE1_OFFSET 0xe000 /* ide1 offset */ -#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */ -#define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */ - -#define CONFIG_SYS_FIRST_PCMCIA_BUS 1 - -#undef CONFIG_IDE_LED /* no led for ide supported */ -#undef CONFIG_IDE_RESET /* reset for ide unsupported... */ -#undef CONFIG_IDE_RESET_ROUTINE /* no special reset function */ - -#define CONFIG_IDE_TI_CARDBUS -#define CONFIG_SYS_PCMCIA_CIS_WIN 0x27f00000 -#define CONFIG_SYS_PCMCIA_CIS_WIN_SIZE 0x00100000 -#define CONFIG_SYS_PCMCIA_IO_WIN 0xe000 -#define CONFIG_SYS_PCMCIA_IO_WIN_SIZE 16 -#define CONFIG_PCMCIA_SLOT_A /* TODO: Check this */ - -/************************************************************ - * DISK Partition support - ************************************************************/ -#define CONFIG_DOS_PARTITION -#define CONFIG_MAC_PARTITION -#define CONFIG_ISO_PARTITION /* Experimental */ - - -/************************************************************ - * RTC - ***********************************************************/ -#define CONFIG_RTC_MC146818 -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * PCI stuff - */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_PNP /* pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW - -#define CONFIG_SYS_FIRST_PCI_IRQ 9 -#define CONFIG_SYS_SECOND_PCI_IRQ 10 -#define CONFIG_SYS_THIRD_PCI_IRQ 11 -#define CONFIG_SYS_FORTH_PCI_IRQ 12 - -#endif /* __CONFIG_H */ |