summaryrefslogtreecommitdiff
path: root/include/configs/sbc8560.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/sbc8560.h')
-rw-r--r--include/configs/sbc8560.h55
1 files changed, 29 insertions, 26 deletions
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index f07fbc0..6e4cc4a 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -102,11 +102,11 @@
#define CFG_SDRAM_SIZE 512 /* DDR is 512MB */
#define SPD_EEPROM_ADDRESS 0x55 /* DDR DIMM */
-#undef CONFIG_DDR_ECC /* only for ECC DDR module */
-#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
#if defined(CONFIG_MPC85xx_REV1)
- #define CONFIG_DDR_DLL /* possible DLL fix needed */
+ #define CONFIG_DDR_DLL /* possible DLL fix needed */
#endif
#undef CONFIG_CLOCKS_IN_MHZ
@@ -177,8 +177,8 @@
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
-#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else */
+#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
+#undef CONFIG_CONS_NONE /* define if console on something else */
#define CONFIG_CONS_INDEX 1
#undef CONFIG_SERIAL_SOFTWARE_FIFO
@@ -284,20 +284,20 @@
* FLASH and environment organization
*/
-#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
#if 0
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CFG_FLASH_PROTECTION /* use hardware protection */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_PROTECTION /* use hardware protection */
#endif
-#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#undef CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#if 0
/* XXX This doesn't work and I don't want to fix it */
@@ -327,9 +327,8 @@
#define CFG_ENV_SIZE 0x2000
#endif
-#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600"
+#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600"
/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/
-#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000"
#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
@@ -405,19 +404,23 @@
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
-/*Note: change below for your network setting!!! */
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-# define CONFIG_ETHADDR 00:01:af:07:9b:8a
-# define CONFIG_HAS_ETH1
-# define CONFIG_ETH1ADDR 00:01:af:07:9b:8b
-# define CONFIG_HAS_ETH2
-# define CONFIG_ETH2ADDR 00:01:af:07:9b:8c
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
#endif
-#define CONFIG_SERVERIP 192.168.0.131
-#define CONFIG_IPADDR 192.168.0.105
-#define CONFIG_GATEWAYIP 0.0.0.0
-#define CONFIG_NETMASK 255.255.255.0
+/* You can compile in a MAC address and your custom net settings by using
+ * the following syntax. Your board should be marked with the assigned
+ * MAC addresses directly on it.
+ *
+ * #define CONFIG_ETHADDR de:ad:be:ef:00:00
+ * #define CONFIG_ETH1ADDR fa:ke:ad:dr:es:s!
+ * #define CONFIG_SERVERIP <server ip>
+ * #define CONFIG_IPADDR <board ip>
+ * #define CONFIG_GATEWAYIP <gateway ip>
+ * #define CONFIG_NETMASK <your netmask>
+ */
+
#define CONFIG_HOSTNAME SBC8560
#define CONFIG_ROOTPATH /home/ppc
#define CONFIG_BOOTFILE pImage