summaryrefslogtreecommitdiff
path: root/include/configs/sbc8240.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/sbc8240.h')
-rw-r--r--include/configs/sbc8240.h365
1 files changed, 365 insertions, 0 deletions
diff --git a/include/configs/sbc8240.h b/include/configs/sbc8240.h
new file mode 100644
index 0000000..d891e07
--- /dev/null
+++ b/include/configs/sbc8240.h
@@ -0,0 +1,365 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Configuration settings for the sbc8240 board.
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X 1
+#define CONFIG_MPC8240 1
+#define CONFIG_WRSBC8240 1
+
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 9600
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_PREBOOT "echo;echo Welcome to U-Boot for the sbc8240;echo;echo Type \"? or help\" to get on-line help;echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_BOOTCOMMAND "version;echo;tftpboot $loadaddr $loadfile;bootvx" /* autoboot command */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootargs=$fei(0,0)host:/T221ppc/target/config/sbc8240/vxWorks.st " \
+ "e=192.168.193.102 h=192.168.193.99 u=target pw=hello f=0x08 " \
+ "tn=sbc8240 o=fei \0" \
+ "env_startaddr=FFF70000\0" \
+ "env_endaddr=FFF7FFFF\0" \
+ "loadfile=vxWorks.st\0" \
+ "loadaddr=0x01000000\0" \
+ "net_load=tftpboot $loadaddr $loadfile\0" \
+ "uboot_startaddr=FFF00000\0" \
+ "uboot_endaddr=FFF3FFFF\0" \
+ "update=tftp $loadaddr /u-boot.bin;" \
+ "protect off $uboot_startaddr $uboot_endaddr;" \
+ "era $uboot_startaddr $uboot_endaddr;" \
+ "cp.b $loadaddr $uboot_startaddr $filesize;" \
+ "protect on $uboot_startaddr $uboot_endaddr\0" \
+ "zapenv=protect off $env_startaddr $env_endaddr;" \
+ "era $env_startaddr $env_endaddr;" \
+ "protect on $env_startaddr $env_endaddr\0"
+
+#define CONFIG_BOOTDELAY 5
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_BSP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ELF | \
+ CFG_CMD_ENV | \
+ CFG_CMD_FLASH | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_SDRAM | \
+ 0 )
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+ */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+
+#if 1
+#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
+#endif
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */
+#define CONFIG_IPADDR 192.168.193.102
+#define CONFIG_NETMASK 255.255.255.248
+#define CONFIG_SERVERIP 192.168.193.99
+
+#define CONFIG_STATUS_LED /* Status LED enabled */
+#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
+
+#define STATUS_LED_BIT 0x00000001
+#define STATUS_LED_PERIOD (CFG_HZ / 2)
+#define STATUS_LED_STATE STATUS_LED_BLINKING
+#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
+#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+
+#ifndef __ASSEMBLY__
+/* LEDs */
+typedef unsigned int led_id_t;
+
+#define __led_toggle(_msk) \
+ do { \
+ *((volatile char *) (CFG_LED_BASE)) ^= (_msk); \
+ } while(0)
+
+#define __led_set(_msk, _st) \
+ do { \
+ if ((_st)) \
+ *((volatile char *) (CFG_LED_BASE)) |= (_msk); \
+ else \
+ *((volatile char *) (CFG_LED_BASE)) &= ~(_msk); \
+ } while(0)
+
+#define __led_init(msk, st) __led_set(msk, st)
+
+#endif
+
+#define CONFIG_MISC_INIT_R
+#define CFG_LED_BASE 0xFFE80000
+
+/* Print Buffer Size
+ */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x00100000 /* Default load address */
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFF00000
+
+#define CFG_RESET_ADDRESS 0xFFF00100
+
+#define CFG_EUMB_ADDR 0xFCE00000
+
+#define CFG_MONITOR_BASE TEXT_BASE
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
+#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
+
+ /* Maximum amount of RAM.
+ */
+#define CFG_MAX_RAM_SIZE 0x10000000
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#undef CFG_RAMBOOT
+#else
+#define CFG_RAMBOOT
+#endif
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+
+ /* Size in bytes reserved for initial data
+ */
+#define CFG_GBL_DATA_SIZE 128
+
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE 1
+
+#define CFG_NS16550_CLK 3686400
+
+#define CFG_NS16550_COM1 0xFFF80000
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ * For the detail description refer to the MPC8240 user's manual.
+ */
+
+#define CONFIG_SYS_CLK_FREQ 33000000
+#define CFG_HZ 1000
+#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3
+
+ /* Bit-field values for MCCR1.
+ */
+#define CFG_ROMNAL 0
+#define CFG_ROMFAL 7
+
+ /* Bit-field values for MCCR2.
+ */
+#define CFG_REFINT 430 /* Refresh interval */
+
+ /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
+ */
+#define CFG_BSTOPRE 192
+
+ /* Bit-field values for MCCR3.
+ */
+#define CFG_REFREC 2 /* Refresh to activate interval */
+#define CFG_RDLAT 3 /* Data latancy from read command */
+
+ /* Bit-field values for MCCR4.
+ */
+#define CFG_PRETOACT 2 /* Precharge to activate interval */
+#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
+#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */
+#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
+#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length */
+#define CFG_ACTORW 2
+#define CFG_REGISTERD_TYPE_BUFFER 1
+
+/* Memory bank settings.
+ * Only bits 20-29 are actually used from these vales to set the
+ * start/end addresses. The upper two bits will always be 0, and the lower
+ * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
+ * address. Refer to the MPC8240 book.
+ */
+
+#define CFG_BANK0_START 0x00000000
+#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE 1
+#define CFG_BANK1_START 0x3ff00000
+#define CFG_BANK1_END 0x3fffffff
+#define CFG_BANK1_ENABLE 0
+#define CFG_BANK2_START 0x3ff00000
+#define CFG_BANK2_END 0x3fffffff
+#define CFG_BANK2_ENABLE 0
+#define CFG_BANK3_START 0x3ff00000
+#define CFG_BANK3_END 0x3fffffff
+#define CFG_BANK3_ENABLE 0
+#define CFG_BANK4_START 0x3ff00000
+#define CFG_BANK4_END 0x3fffffff
+#define CFG_BANK4_ENABLE 0
+#define CFG_BANK5_START 0x3ff00000
+#define CFG_BANK5_END 0x3fffffff
+#define CFG_BANK5_ENABLE 0
+#define CFG_BANK6_START 0x3ff00000
+#define CFG_BANK6_END 0x3fffffff
+#define CFG_BANK6_ENABLE 0
+#define CFG_BANK7_START 0x3ff00000
+#define CFG_BANK7_END 0x3fffffff
+#define CFG_BANK7_ENABLE 0
+
+#define CFG_ODCR 0xff
+
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT3L (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */
+#define CFG_MAX_FLASH_SECT 256 /* Max number of sectors in one bank */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
+
+ /* Warining: environment is not EMBEDDED in the U-Boot code.
+ * It's stored in flash separately.
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR 0xFFF70000
+#define CFG_ENV_SIZE 0x4000 /* Size of the Environment */
+#define CFG_ENV_OFFSET 0 /* starting right at the beginning */
+#define CFG_ENV_SECT_SIZE 0x40000 /* Size of the Environment Sector */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* we need Plug 'n Play */
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+#define CONFIG_TULIP
+#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
+#endif /* __CONFIG_H */