diff options
Diffstat (limited to 'include/configs/pm9261.h')
| -rw-r--r-- | include/configs/pm9261.h | 382 |
1 files changed, 382 insertions, 0 deletions
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h new file mode 100644 index 0000000..ac09cf2 --- /dev/null +++ b/include/configs/pm9261.h @@ -0,0 +1,382 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * Ilko Iliev <www.ronetix.at> + * + * Configuation settings for the RONETIX PM9261 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91_CPU_NAME "AT91SAM9261" + +#define CONFIG_DISPLAY_BOARDINFO + +#define MASTER_PLL_DIV 15 +#define MASTER_PLL_MUL 162 +#define MAIN_PLL_DIV 2 +#define AT91_MAIN_CLOCK 18432000 + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/ +#define CONFIG_PM9261 1 /* on a Ronetix PM9261 Board */ +#define CONFIG_ARCH_CPU_INIT +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* clocks */ +/* CKGR_MOR - enable main osc. */ +#define CONFIG_SYS_MOR_VAL \ + (AT91_PMC_MOSCEN | \ + (255 << 8)) /* Main Oscillator Start-up Time */ +#define CONFIG_SYS_PLLAR_VAL \ + (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ + AT91_PMC_OUT | \ + ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) + +/* PCK/2 = MCK Master Clock from PLLA */ +#define CONFIG_SYS_MCKR1_VAL \ + (AT91_PMC_CSS_SLOW | \ + AT91_PMC_PRES_1 | \ + AT91SAM9_PMC_MDIV_2 | \ + AT91_PMC_PDIV_1) + +/* PCK/2 = MCK Master Clock from PLLA */ +#define CONFIG_SYS_MCKR2_VAL \ + (AT91_PMC_CSS_PLLA | \ + AT91_PMC_PRES_1 | \ + AT91SAM9_PMC_MDIV_2 | \ + AT91_PMC_PDIV_1) + +/* define PDC[31:16] as DATA[31:16] */ +#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000 +/* no pull-up for D[31:16] */ +#define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000 + +/* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ +#define CONFIG_SYS_MATRIX_EBICSA_VAL \ + (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC) + +/* SDRAM */ +/* SDRAMC_MR Mode register */ +#define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL +/* SDRAMC_TR - Refresh Timer register */ +#define CONFIG_SYS_SDRC_TR_VAL1 0x13C +/* SDRAMC_CR - Configuration register*/ +#define CONFIG_SYS_SDRC_CR_VAL \ + (AT91_SDRAMC_NC_9 | \ + AT91_SDRAMC_NR_13 | \ + AT91_SDRAMC_NB_4 | \ + AT91_SDRAMC_CAS_3 | \ + AT91_SDRAMC_DBW_32 | \ + (1 << 8) | /* Write Recovery Delay */ \ + (7 << 12) | /* Row Cycle Delay */ \ + (3 << 16) | /* Row Precharge Delay */ \ + (2 << 20) | /* Row to Column Delay */ \ + (5 << 24) | /* Active to Precharge Delay */ \ + (1 << 28)) /* Exit Self Refresh to Active Delay */ + +/* Memory Device Register -> SDRAM */ +#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM +#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE +#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH +#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR +#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL +#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ +#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ + +/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ +#define CONFIG_SYS_SMC0_SETUP0_VAL \ + (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | \ + AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10)) +#define CONFIG_SYS_SMC0_PULSE0_VAL \ + (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | \ + AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11)) +#define CONFIG_SYS_SMC0_CYCLE0_VAL \ + (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22)) +#define CONFIG_SYS_SMC0_MODE0_VAL \ + (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ + AT91_SMC_DBW_16 | \ + AT91_SMC_TDFMODE | \ + AT91_SMC_TDF_(6)) + +/* user reset enable */ +#define CONFIG_SYS_RSTC_RMR_VAL \ + (AT91_RSTC_KEY | \ + AT91_RSTC_PROCRST | \ + AT91_RSTC_RSTTYP_WAKEUP | \ + AT91_RSTC_RSTTYP_WATCHDOG) + +/* Disable Watchdog */ +#define CONFIG_SYS_WDTC_WDMR_VAL \ + (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \ + AT91_WDT_WDV | \ + AT91_WDT_WDDIS | \ + AT91_WDT_WDD) + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#undef CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +/* LCD */ +#define CONFIG_LCD 1 +#define LCD_BPP LCD_COLOR8 +#define CONFIG_LCD_LOGO 1 +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO 1 +#define CONFIG_LCD_INFO_BELOW_LOGO 1 +#define CONFIG_SYS_WHITE_ON_BLACK 1 +#define CONFIG_ATMEL_LCD 1 +#define CONFIG_ATMEL_LCD_BGR555 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 + +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIN_PC12 +#define CONFIG_GREEN_LED AT91_PIN_PC13 +#define CONFIG_YELLOW_LED AT91_PIN_PC15 + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ + +/* DataFlash */ +#define CONFIG_ATMEL_DATAFLASH_SPI +#define CONFIG_HAS_DATAFLASH +#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) +#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 +#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ +#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */ +#define AT91_SPI_CLK 15000000 +#define DATAFLASH_TCSS (0x1a << 16) +#define DATAFLASH_TCHS (0x1 << 24) + +/* NAND flash */ +#define CONFIG_NAND_ATMEL +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD22 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 22) +/* our CLE is AD21 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 21) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA16 + + +/* NOR flash */ +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define PHYS_FLASH_1 0x10000000 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MAX_FLASH_SECT 256 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 + +/* Ethernet */ +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DM9000_BASE 0x30000000 +#define DM9000_IO CONFIG_DM9000_BASE +#define DM9000_DATA (CONFIG_DM9000_BASE + 4) +#define CONFIG_DM9000_USE_16BIT 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R 1 + +/* USB */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END 0x23e00000 + +#undef CONFIG_SYS_USE_DATAFLASH_CS0 +#undef CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SYS_USE_FLASH 1 + +#ifdef CONFIG_SYS_USE_DATAFLASH_CS0 + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CONFIG_ENV_IS_IN_DATAFLASH 1 +#define CONFIG_SYS_MONITOR_BASE \ + (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) +#define CONFIG_ENV_OFFSET 0x4200 +#define CONFIG_ENV_ADDR \ + (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_SIZE 0x4200 +#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock0 " \ + "mtdparts=at91_nand:-(root) " \ + "rw rootfstype=jffs2" + +#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */ + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock5 " \ + "mtdparts=at91_nand:128k(bootstrap)ro," \ + "256k(uboot)ro,128k(env1)ro," \ + "128k(env2)ro,2M(linux),-(root) " \ + "rw rootfstype=jffs2" + +#elif defined (CONFIG_SYS_USE_FLASH) + +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OFFSET 0x40000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_OVERWRITE 1 + +/* JFFS Partition offset set */ +#define CONFIG_SYS_JFFS2_FIRST_BANK 0 +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +/* 512k reserved for u-boot */ +#define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 + +#define CONFIG_BOOTCOMMAND "run flashboot" + +#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=physmap-flash.0:" \ + "256k(u-boot)ro," \ + "64k(u-boot-env)ro," \ + "1408k(kernel)," \ + "-(rootfs);" \ + "nand:-(nand)" + +#define CONFIG_CON_ROT "fbcon=rotate:3 " +#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 " CONFIG_CON_ROT + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "partition=nand0,0\0" \ + "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + CONFIG_CON_ROT \ + "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\ + ":$(hostname):eth0:off\0" \ + "ramboot=tftpboot 0x22000000 vmImage;" \ + "run ramargs;run addip;bootm 22000000\0" \ + "nfsboot=tftpboot 0x22000000 vmImage;" \ + "run nfsargs;run addip;bootm 22000000\0" \ + "flashboot=run ramargs;run addip;bootm 0x10050000\0" \ + "" +#else +#error "Undefined memory device" +#endif + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CONFIG_SYS_PROMPT "pm9261> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN \ + ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif |