diff options
Diffstat (limited to 'include/configs/p1_p2_rdb_pc.h')
| -rw-r--r-- | include/configs/p1_p2_rdb_pc.h | 51 |
1 files changed, 47 insertions, 4 deletions
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 1b0be23..5f0c4fb 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -34,7 +34,7 @@ #define CONFIG_SYS_L2_SIZE (256 << 10) #endif -#if defined(CONFIG_P1020RDB) +#if defined(CONFIG_P1020RDB_PC) #define CONFIG_BOARDNAME "P1020RDB-PC" #define CONFIG_NAND_FSL_ELBC #define CONFIG_P1020 @@ -50,6 +50,35 @@ #define CONFIG_SYS_L2_SIZE (256 << 10) #endif +/* + * P1020RDB-PD board has user selectable switches for evaluating different + * frequency and boot options for the P1020 device. The table that + * follow describe the available options. The front six binary number was in + * accordance with SW3[1:6]. + * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off + * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off + * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off + * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off + * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off + * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off + * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off + */ +#if defined(CONFIG_P1020RDB_PD) +#define CONFIG_BOARDNAME "P1020RDB-PD" +#define CONFIG_NAND_FSL_ELBC +#define CONFIG_P1020 +#define CONFIG_SPI_FLASH +#define CONFIG_VSC7385_ENET +#define CONFIG_SLIC +#define __SW_BOOT_MASK 0x03 +#define __SW_BOOT_NOR 0x64 +#define __SW_BOOT_SPI 0x34 +#define __SW_BOOT_SD 0x24 +#define __SW_BOOT_NAND 0x44 +#define __SW_BOOT_PCIE 0x74 +#define CONFIG_SYS_L2_SIZE (256 << 10) +#endif + #if defined(CONFIG_P1021RDB) #define CONFIG_BOARDNAME "P1021RDB-PC" #define CONFIG_NAND_FSL_ELBC @@ -143,7 +172,6 @@ #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" @@ -259,7 +287,7 @@ #define SPD_EEPROM_ADDRESS 0x52 #undef CONFIG_FSL_DDR_INTERACTIVE -#ifdef CONFIG_P1020MBG +#if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G #define CONFIG_CHIP_SELECTS_PER_CTRL 2 #else @@ -330,7 +358,7 @@ /* * Local Bus Definitions */ -#if defined(CONFIG_P1020MBG) +#if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ #define CONFIG_SYS_FLASH_BASE 0xec000000 #elif defined(CONFIG_P1020UTM) @@ -381,13 +409,27 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND +#if defined(CONFIG_P1020RDB_PD) +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +#else #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) +#endif #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ +#if defined(CONFIG_P1020RDB_PD) +#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ + | OR_FCM_PGS /* Large Page*/ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR) +#else #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \ | OR_FCM_CSCT \ | OR_FCM_CST \ @@ -395,6 +437,7 @@ | OR_FCM_SCY_1 \ | OR_FCM_TRLX \ | OR_FCM_EHTR) +#endif #endif /* CONFIG_NAND_FSL_ELBC */ #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ |