diff options
Diffstat (limited to 'include/configs/omap4_sdp4430.h')
| -rw-r--r-- | include/configs/omap4_sdp4430.h | 245 |
1 files changed, 7 insertions, 238 deletions
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h index ba6f49d..0a9b707 100644 --- a/include/configs/omap4_sdp4430.h +++ b/include/configs/omap4_sdp4430.h @@ -5,6 +5,7 @@ * Steve Sakoman <steve@sakoman.com> * * Configuration settings for the TI SDP4430 board. + * See omap4_common.h for OMAP4 common part * * See file CREDITS for list of people who contributed to this * project. @@ -25,258 +26,26 @@ * MA 02111-1307 USA */ -#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __CONFIG_SDP4430_H +#define __CONFIG_SDP4430_H /* * High Level Configuration Options */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP44XX 1 /* which is a 44XX */ -#define CONFIG_OMAP4430 1 /* which is in a 4430 */ #define CONFIG_4430SDP 1 /* working with SDP */ -#define CONFIG_ARCH_CPU_INIT -/* Get CPU defs */ -#include <asm/arch/cpu.h> -#include <asm/arch/omap4.h> +#include <configs/omap4_common.h> -/* Display CPU and Board Info */ -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 - -/* Clock Defines */ -#define V_OSCK 38400000 /* Clock output from T2 */ -#define V_SCLK V_OSCK - -#undef CONFIG_USE_IRQ /* no support for IRQs */ -#define CONFIG_MISC_INIT_R - -#define CONFIG_OF_LIBFDT 1 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 - -/* - * Size of malloc() pool - * Total Size Environment - 128k - * Malloc - add 256k - */ -#define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) -/* Vector Base */ -#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE - -/* - * Hardware drivers - */ - -/* - * serial port - NS16550 compatible - */ -#define V_NS16550_CLK 48000000 - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 UART3_BASE - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} -/* I2C */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_BUS 0 -#define CONFIG_SYS_I2C_BUS_SELECT 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 -#define CONFIG_I2C_MULTI_BUS 1 - -/* TWL6030 */ -#define CONFIG_TWL6030_POWER 1 +/* Battery Charger */ #define CONFIG_CMD_BAT 1 -/* MMC */ -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_MMC 1 -#define CONFIG_OMAP_HSMMC 1 -#define CONFIG_SYS_MMC_SET_DEV 1 -#define CONFIG_DOS_PARTITION 1 - -/* MMC ENV related defines */ +/* ENV related config options */ #define CONFIG_ENV_IS_IN_MMC 1 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ #define CONFIG_ENV_OFFSET 0xE0000 - -/* USB */ -#define CONFIG_MUSB_UDC 1 -#define CONFIG_USB_OMAP3 1 - -/* USB device configuration */ -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 - -/* Flash */ -#define CONFIG_SYS_NO_FLASH 1 - -/* commands to include */ -#include <config_cmd_default.h> - -/* Enabled commands */ -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_SAVEENV -/* Disabled commands */ -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMLS /* List all found images */ - -/* - * Environment setup - */ - -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "console=ttyS2,115200n8\0" \ - "usbtty=cdc_acm\0" \ - "vram=16M\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "vram=${vram} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ - "source ${loadaddr}\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc${mmcdev} ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "fi; " \ - "fi; " \ - "fi" - -#define CONFIG_AUTO_COMPLETE 1 - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_PROMPT "OMAP4430 SDP # " -#define CONFIG_SYS_CBSIZE 512 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -/* - * memtest setup - */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20)) - -/* Default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x80000000 - -/* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE GPT2_BASE -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* Regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */ -#endif - -/* - * SDRAM Memory Map - * Even though we use two CS all the memory - * is mapped to one contiguous block - */ -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4030D800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#ifndef CONFIG_SYS_L2CACHE_OFF -#define CONFIG_SYS_L2_PL310 1 -#define CONFIG_SYS_PL310_BASE 0x48242000 -#endif - -/* Defines for SDRAM init */ -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -#endif - -/* Defines for SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_TEXT_BASE 0x40304350 -#define CONFIG_SPL_MAX_SIZE (38 * 1024) -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds" - -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any - * other needs. - */ -#define CONFIG_SYS_TEXT_BASE 0x80100000 +#endif /* __CONFIG_SDP4430_H */ -#endif /* __CONFIG_H */ |