diff options
Diffstat (limited to 'include/configs/o2d300.h')
| -rw-r--r-- | include/configs/o2d300.h | 84 |
1 files changed, 84 insertions, 0 deletions
diff --git a/include/configs/o2d300.h b/include/configs/o2d300.h new file mode 100644 index 0000000..c74e622 --- /dev/null +++ b/include/configs/o2d300.h @@ -0,0 +1,84 @@ +/* + * (C) Copyright 2012 + * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFC000000 boot low boot high (standard configuration) + * 0x00100000 boot from RAM (for testing only) + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */ +#endif + +/* Board specific flash config */ +#define CONFIG_SYS_FLASH_BASE 0xfc000000 +#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */ +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 + +/* + * Include common defines for all ifm boards + */ +#include "o2dnt-common.h" + +/* + * GPIO configuration: + * CS1 SDRAM activate + no CAN + no PCI + */ +#define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004 + +/* Other board specific configs */ +#define CONFIG_SYS_BOOTCS_CFG 0x00057d01 +#define CONFIG_SYS_RESET_ADDRESS 0xfc000000 + +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */ + +/* Use redundant environment */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +#define CONFIG_BOARD_NAME "o2d300" +#define CONFIG_BOARD_BOOTCMD "run dhcp_boot" +#define CONFIG_BOARD_MEM_LIMIT xstr(126) +#define BOARD_POST_CRC32_END xstr(0x02000000) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_IFM_DEFAULT_ENV_SETTINGS \ + CONFIG_IFM_DEFAULT_ENV_OLD \ + CONFIG_IFM_DEFAULT_ENV_NEW \ + "autoload=no\0" \ + "dhcp_boot=run dhcpcmd;run flash_mtd\0" \ + "flash_mtd=run mtd_args addip addmem;" \ + "bootm ${kernel_addr}\0" \ + "mtd_args=setenv bootargs root=/dev/mtdblock4 " \ + "rw rootfstype=cramfs\0" \ + "linbot=fc080000\0" \ + "lintop=fc17ffff\0" \ + "rambot=fc180000\0" \ + "ramtop=fc57ffff\0" \ + "jffbot=fc580000\0" \ + "jfftop=fd39ffff\0" \ + "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \ + "ubotop=fc03ffff\0" \ + "halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0" \ + "halbot=fd3a0000\0" \ + "haltop=fdf9ffff\0" \ + "progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};" \ + "cp.b ${fileaddr} ${halbot} ${filesize}\0" \ + "kernel_addr=0xfc060000\0" \ + "ramdisk_addr=0xfc160000\0" \ + "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \ + "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" \ + "netretry=once\0" \ + "protcmd=protect on ${linbot} ${lintop};" \ + "protect on ${rambot} ${ramtop}\0" \ + "o2derror=def_env\0" \ + "sensorType=O2D300AA\0" |