diff options
Diffstat (limited to 'include/configs/ns9750dev.h')
| -rw-r--r-- | include/configs/ns9750dev.h | 187 |
1 files changed, 0 insertions, 187 deletions
diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h deleted file mode 100644 index 3f49c6f..0000000 --- a/include/configs/ns9750dev.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * Markus Pietrek <mpietrek@fsforth.de> - * - * Configuation settings for the NetSilicon NS9750 DevBoard - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ -#define CONFIG_NS9750 1 /* in an NetSilicon NS9750 SoC */ -#define CONFIG_NS9750DEV 1 /* on an NetSilicon NS9750 DevBoard */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 324403200 /* Don't use PLL. SW11-4 off */ - -#define CPU_CLK_FREQ (CONFIG_SYS_CLK_FREQ/2) -#define AHB_CLK_FREQ (CONFIG_SYS_CLK_FREQ/4) -#define BBUS_CLK_FREQ (CONFIG_SYS_CLK_FREQ/8) - -/*@TODO #define CONFIG_STATUS_LED*/ -#define CONFIG_USE_IRQ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_NS9750_UART 1 /* use on-chip UART */ - -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 1 /* Port B */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 38400 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_PING - - -#define CONFIG_BOOTDELAY 3 -/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */ - -#define CONFIG_ETHADDR 00:04:f3:ff:ff:fb /*@TODO unset */ -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.42.30 -#define CONFIG_SERVERIP 192.168.42.1 - -/*#define CONFIG_BOOTFILE "elinos-lart" */ -/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "NS9750DEV # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00780000 /* 7,5 MB in DRAM */ /* @TODO */ - -#define CONFIG_SYS_LOAD_ADDR 0x00600000 /* default load address */ /* @TODO */ - -#define CONFIG_SYS_HZ (CPU_CLK_FREQ/64) - -#define NS9750_ETH_PHY_ADDRESS (0x0000) - -/*----------------------------------------------------------------------- - * Stack sizes - */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -/* TODO */ -#define CONFIG_NR_DRAM_BANKS 2 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */ -#define PHYS_SDRAM_2 0x10000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_2_SIZE 0x00800000 /* 8 MB */ - -#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -/* @TODO*/ -#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ -#if 0 -#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ -#endif - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#ifdef CONFIG_AMD_LV800 -#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */ -#endif -#ifdef CONFIG_AMD_LV400 -#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ -#define CONFIG_SYS_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */ -#endif - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* @TODO */ -/*#define CONFIG_ENV_IS_IN_FLASH 1*/ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ - -#ifdef CONFIG_STATUS_LED - -extern void __led_init(led_id_t mask, int state); -extern void __led_toggle(led_id_t mask); -extern void __led_set(led_id_t mask, int state); - -#endif /* CONFIG_STATUS_LED */ - -#endif /* __CONFIG_H */ |