summaryrefslogtreecommitdiff
path: root/include/configs/ns9750dev.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/ns9750dev.h')
-rw-r--r--include/configs/ns9750dev.h211
1 files changed, 211 insertions, 0 deletions
diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h
new file mode 100644
index 0000000..11d21b2
--- /dev/null
+++ b/include/configs/ns9750dev.h
@@ -0,0 +1,211 @@
+/*
+ * Copyright (C) 2004 by FS Forth-Systeme GmbH.
+ * All rights reserved.
+ * Markus Pietrek <mpietrek@fsforth.de>
+ *
+ * Configuation settings for the NetSilicon NS9750 DevBoard
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#define CONFIG_NS9750 1 /* in an NetSilicon NS9750 SoC */
+#define CONFIG_NS9750DEV 1 /* on an NetSilicon NS9750 DevBoard */
+
+/* input clock of PLL */
+#define CONFIG_SYS_CLK_FREQ 324403200 /* Don't use PLL. SW11-4 off */
+
+#define CPU_CLK_FREQ (CONFIG_SYS_CLK_FREQ/2)
+#define AHB_CLK_FREQ (CONFIG_SYS_CLK_FREQ/4)
+#define BBUS_CLK_FREQ (CONFIG_SYS_CLK_FREQ/8)
+
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/*@TODO #define CONFIG_STATUS_LED*/
+#define CONFIG_USE_IRQ
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial
+ * data */
+
+/*
+ * Hardware drivers
+ */
+#define CFG_NS9750_UART 1 /* use on-chip UART */
+#define CONFIG_DRIVER_NS9750_ETHERNET 1 /* use on-chip ethernet */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX 1 /* Port B */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 38400
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+#if 0 /* @TODO */
+#define CONFIG_COMMANDS \
+ (CONFIG_CMD_DFL | \
+ CFG_CMD_CACHE | \
+ /*CFG_CMD_NAND |*/ \
+ /*CFG_CMD_EEPROM |*/ \
+ /*CFG_CMD_I2C |*/ \
+ /*CFG_CMD_USB |*/ \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_DATE | \
+ CFG_CMD_ELF)
+#else
+#define CONFIG_COMMANDS \
+ (CONFIG_CMD_BDI | \
+ CFG_CMD_NET | \
+ CFG_CMD_PING | \
+ CFG_CMD_CONSOLE | \
+ CFG_CMD_LOADB | \
+ CFG_CMD_LOADS | \
+ CFG_CMD_MEMORY)
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY 3
+/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */
+
+#define CONFIG_ETHADDR 00:04:f3:ff:ff:fb /*@TODO unset */
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.42.30
+#define CONFIG_SERVERIP 192.168.42.1
+
+/*#define CONFIG_BOOTFILE "elinos-lart" */
+/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+/* what's this ? it's not used anywhere */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "NS9750DEV # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00780000 /* 7,5 MB in DRAM */ /* @TODO */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0x00600000 /* default load address */ /* @TODO */
+
+#define CFG_HZ (CPU_CLK_FREQ/64)
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define NS9750_ETH_PHY_ADDRESS (0x0000)
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+/* TODO */
+#define CONFIG_NR_DRAM_BANKS 2 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */
+#define PHYS_SDRAM_2 0x10000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_2_SIZE 0x00800000 /* 8 MB */
+
+#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */
+
+#define CFG_FLASH_BASE PHYS_FLASH_1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+/* @TODO*/
+#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */
+#if 0
+#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */
+#endif
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#ifdef CONFIG_AMD_LV800
+#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */
+#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
+#endif
+#ifdef CONFIG_AMD_LV400
+#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */
+#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */
+#endif
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */
+
+/* @TODO */
+/*#define CFG_ENV_IS_IN_FLASH 1*/
+#define CFG_ENV_IS_NOWHERE
+#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
+
+#ifdef CONFIG_STATUS_LED
+
+extern void __led_init(led_id_t mask, int state);
+extern void __led_toggle(led_id_t mask);
+extern void __led_set(led_id_t mask, int state);
+
+#endif /* CONFIG_STATUS_LED */
+
+#endif /* __CONFIG_H */