diff options
Diffstat (limited to 'include/configs/nitrogen6x.h')
| -rw-r--r-- | include/configs/nitrogen6x.h | 113 |
1 files changed, 84 insertions, 29 deletions
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 39d5bb3..6d379ed 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -32,6 +32,7 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MISC_INIT_R #define CONFIG_MXC_GPIO +#define CONFIG_CMD_GPIO #define CONFIG_CI_UDC #define CONFIG_USBD_HS #define CONFIG_USB_GADGET_DUALSPEED @@ -63,6 +64,7 @@ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_I2C_EDID /* MMC Configs */ #define CONFIG_FSL_ESDHC @@ -75,6 +77,8 @@ #define CONFIG_GENERIC_MMC #define CONFIG_BOUNCE_BUFFER #define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION @@ -122,6 +126,8 @@ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP /* Miscellaneous commands */ #define CONFIG_CMD_BMODE @@ -137,7 +143,6 @@ #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_SPLASH_SCREEN #define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_LOGO #define CONFIG_IPUV3_CLK 260000000 #define CONFIG_CMD_HDMIDETECT #define CONFIG_CONSOLE_MUX @@ -173,7 +178,14 @@ #define CONFIG_DRIVE_MMC #endif -#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC +#ifdef CONFIG_USB_STORAGE +#define CONFIG_DRIVE_USB "usb " +#else +#define CONFIG_DRIVE_USB +#endif + +#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB +#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC #if defined(CONFIG_SABRELITE) #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -186,7 +198,7 @@ "fdt_addr=0x18000000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ - "mmcdev=0\0" \ + "mmcdevs=0 1\0" \ "mmcpart=1\0" \ "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -238,47 +250,71 @@ "fi;\0" #define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" + "for mmcdev in ${mmcdevs}; do " \ + "mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "fi; " \ + "fi; " \ + "fi; " \ + "done; " \ + "run netboot; " #else #define CONFIG_EXTRA_ENV_SETTINGS \ + "bootdevs=" CONFIG_DRIVE_TYPES "\0" \ + "umsdevs=" CONFIG_UMSDEVS "\0" \ "console=ttymxc1\0" \ "clearenv=if sf probe || sf probe || sf probe 1 ; then " \ "sf erase 0xc0000 0x2000 && " \ "echo restored environment to factory default ; fi\0" \ - "bootcmd=for dtype in " CONFIG_DRIVE_TYPES \ + "bootcmd=for dtype in ${bootdevs}" \ "; do " \ + "if itest.s \"xusb\" == \"x${dtype}\" ; then " \ + "usb start ;" \ + "fi; " \ "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ - "for fs in fat ext2 ; do " \ - "${fs}load " \ - "${dtype} ${disk}:1 " \ - "10008000 " \ - "/6x_bootscript" \ - "&& source 10008000 ; " \ - "done ; " \ + "load " \ + "${dtype} ${disk}:1 " \ + "10008000 " \ + "/6x_bootscript" \ + "&& source 10008000 ; " \ "done ; " \ "done; " \ "setenv stdout serial,vga ; " \ "echo ; echo 6x_bootscript not found ; " \ "echo ; echo serial console at 115200, 8N1 ; echo ; " \ "echo details at http://boundarydevices.com/6q_bootscript ; " \ - "setenv stdout serial\0" \ - "upgradeu=for dtype in " CONFIG_DRIVE_TYPES \ + "setenv stdout serial;" \ + "setenv stdin serial,usbkbd;" \ + "for dtype in ${umsdevs} ; do " \ + "if itest.s sata == ${dtype}; then " \ + "initcmd='sata init' ;" \ + "else " \ + "initcmd='mmc rescan' ;" \ + "fi; " \ + "for disk in 0 1 ; do " \ + "if $initcmd && $dtype dev $disk ; then " \ + "setenv stdout serial,vga; " \ + "echo expose ${dtype} ${disk} " \ + "over USB; " \ + "ums 0 $dtype $disk ;" \ + "fi; " \ + " done; " \ + "done ;" \ + "setenv stdout serial,vga; " \ + "echo no block devices found;" \ + "\0" \ + "initrd_high=0xffffffff\0" \ + "upgradeu=for dtype in ${bootdevs}" \ "; do " \ "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ - "for fs in fat ext2 ; do " \ - "${fs}load ${dtype} ${disk}:1 10008000 " \ - "/6x_upgrade " \ - "&& source 10008000 ; " \ - "done ; " \ + "load ${dtype} ${disk}:1 10008000 " \ + "/6x_upgrade " \ + "&& source 10008000 ; " \ "done ; " \ "done\0" \ @@ -292,7 +328,7 @@ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_MAXARGS 48 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MEMTEST_START 0x10000000 @@ -349,6 +385,7 @@ #define CONFIG_CMD_BMP #define CONFIG_CMD_TIME +#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_ALT_MEMTEST #define CONFIG_CMD_BOOTZ @@ -365,4 +402,22 @@ #define CONFIG_PCIE_IMX #endif +#define CONFIG_CMD_ELF + +#define CONFIG_USB_GADGET +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_VBUS_DRAW 2 + +/* Netchip IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 +#define CONFIG_G_DNL_MANUFACTURER "Boundary" + +#define CONFIG_CMD_FASTBOOT +#define CONFIG_ANDROID_BOOT_IMAGE +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 + #endif /* __CONFIG_H */ |