summaryrefslogtreecommitdiff
path: root/include/configs/nitrogen6x.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/nitrogen6x.h')
-rw-r--r--include/configs/nitrogen6x.h113
1 files changed, 84 insertions, 29 deletions
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 39d5bb3..6d379ed 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -32,6 +32,7 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
#define CONFIG_MXC_GPIO
+#define CONFIG_CMD_GPIO
#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
#define CONFIG_USB_GADGET_DUALSPEED
@@ -63,6 +64,7 @@
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_I2C_EDID
/* MMC Configs */
#define CONFIG_FSL_ESDHC
@@ -75,6 +77,8 @@
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
@@ -122,6 +126,8 @@
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
/* Miscellaneous commands */
#define CONFIG_CMD_BMODE
@@ -137,7 +143,6 @@
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_CONSOLE_MUX
@@ -173,7 +178,14 @@
#define CONFIG_DRIVE_MMC
#endif
-#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
+#ifdef CONFIG_USB_STORAGE
+#define CONFIG_DRIVE_USB "usb "
+#else
+#define CONFIG_DRIVE_USB
+#endif
+
+#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
+#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
#if defined(CONFIG_SABRELITE)
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -186,7 +198,7 @@
"fdt_addr=0x18000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
- "mmcdev=0\0" \
+ "mmcdevs=0 1\0" \
"mmcpart=1\0" \
"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
@@ -238,47 +250,71 @@
"fi;\0"
#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loaduimage; then " \
- "run mmcboot; " \
- "else run netboot; " \
- "fi; " \
- "fi; " \
- "else run netboot; fi"
+ "for mmcdev in ${mmcdevs}; do " \
+ "mmc dev ${mmcdev}; " \
+ "if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "fi; " \
+ "fi; " \
+ "fi; " \
+ "done; " \
+ "run netboot; "
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootdevs=" CONFIG_DRIVE_TYPES "\0" \
+ "umsdevs=" CONFIG_UMSDEVS "\0" \
"console=ttymxc1\0" \
"clearenv=if sf probe || sf probe || sf probe 1 ; then " \
"sf erase 0xc0000 0x2000 && " \
"echo restored environment to factory default ; fi\0" \
- "bootcmd=for dtype in " CONFIG_DRIVE_TYPES \
+ "bootcmd=for dtype in ${bootdevs}" \
"; do " \
+ "if itest.s \"xusb\" == \"x${dtype}\" ; then " \
+ "usb start ;" \
+ "fi; " \
"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
- "for fs in fat ext2 ; do " \
- "${fs}load " \
- "${dtype} ${disk}:1 " \
- "10008000 " \
- "/6x_bootscript" \
- "&& source 10008000 ; " \
- "done ; " \
+ "load " \
+ "${dtype} ${disk}:1 " \
+ "10008000 " \
+ "/6x_bootscript" \
+ "&& source 10008000 ; " \
"done ; " \
"done; " \
"setenv stdout serial,vga ; " \
"echo ; echo 6x_bootscript not found ; " \
"echo ; echo serial console at 115200, 8N1 ; echo ; " \
"echo details at http://boundarydevices.com/6q_bootscript ; " \
- "setenv stdout serial\0" \
- "upgradeu=for dtype in " CONFIG_DRIVE_TYPES \
+ "setenv stdout serial;" \
+ "setenv stdin serial,usbkbd;" \
+ "for dtype in ${umsdevs} ; do " \
+ "if itest.s sata == ${dtype}; then " \
+ "initcmd='sata init' ;" \
+ "else " \
+ "initcmd='mmc rescan' ;" \
+ "fi; " \
+ "for disk in 0 1 ; do " \
+ "if $initcmd && $dtype dev $disk ; then " \
+ "setenv stdout serial,vga; " \
+ "echo expose ${dtype} ${disk} " \
+ "over USB; " \
+ "ums 0 $dtype $disk ;" \
+ "fi; " \
+ " done; " \
+ "done ;" \
+ "setenv stdout serial,vga; " \
+ "echo no block devices found;" \
+ "\0" \
+ "initrd_high=0xffffffff\0" \
+ "upgradeu=for dtype in ${bootdevs}" \
"; do " \
"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
- "for fs in fat ext2 ; do " \
- "${fs}load ${dtype} ${disk}:1 10008000 " \
- "/6x_upgrade " \
- "&& source 10008000 ; " \
- "done ; " \
+ "load ${dtype} ${disk}:1 10008000 " \
+ "/6x_upgrade " \
+ "&& source 10008000 ; " \
"done ; " \
"done\0" \
@@ -292,7 +328,7 @@
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_MAXARGS 48
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_MEMTEST_START 0x10000000
@@ -349,6 +385,7 @@
#define CONFIG_CMD_BMP
#define CONFIG_CMD_TIME
+#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_CMD_BOOTZ
@@ -365,4 +402,22 @@
#define CONFIG_PCIE_IMX
#endif
+#define CONFIG_CMD_ELF
+
+#define CONFIG_USB_GADGET
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+
+/* Netchip IDs */
+#define CONFIG_G_DNL_VENDOR_NUM 0x0525
+#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
+#define CONFIG_G_DNL_MANUFACTURER "Boundary"
+
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_ANDROID_BOOT_IMAGE
+#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
+#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000
+
#endif /* __CONFIG_H */