diff options
Diffstat (limited to 'include/configs/ml507.h')
| -rw-r--r-- | include/configs/ml507.h | 122 |
1 files changed, 122 insertions, 0 deletions
diff --git a/include/configs/ml507.h b/include/configs/ml507.h new file mode 100644 index 0000000..c653a51 --- /dev/null +++ b/include/configs/ml507.h @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2008 + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * This work has been supported by: QTechnology http://qtec.com/ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H +/* +#define DEBUG +#define ET_DEBUG +*/ + /*CPU*/ +#define CONFIG_XILINX_ML507 1 +#define CONFIG_XILINX_440 1 +#define CONFIG_440 1 +#define CONFIG_4xx 1 +#include "../board/xilinx/ml507/xparameters.h" + +/*Mem Map*/ +#define CFG_SDRAM_BASE 0x0 +#define CFG_SDRAM_SIZE_MB 256 +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN ( 192 * 1024 ) +#define CFG_MALLOC_LEN ( CFG_ENV_SIZE + 128 * 1024 ) + +/*Uart*/ +#define CONFIG_XILINX_UARTLITE +#define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE +#define CFG_BAUDRATE_TABLE { XPAR_UARTLITE_0_BAUDRATE } +#define CONFIG_SERIAL_BASE XPAR_UARTLITE_0_BASEADDR + +/*Cmd*/ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_PING +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_IMLS + +/*Env*/ +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SIZE 0x20000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_OFFSET 0x340000 +#define CFG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET) + +/*Misc*/ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "board:/# " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE ( CFG_CBSIZE + sizeof( CFG_PROMPT ) + 16 ) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ +#define CFG_LOAD_ADDR 0x00400000 /* default load address */ +#define CFG_EXTBDINFO 1 /* Extended board_into (bd_t) */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_CMDLINE_EDITING /* add command line history */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_LOOPW /* enable loopw command */ +#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE /* include version env variable */ +#define CFG_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CFG_HUSH_PARSER /* Use the HUSH parser */ +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */ +#define CFG_BOOTMAPSZ ( 8 << 20 ) /* Initial Memory map for Linux */ +#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" + +/*Stack*/ +#define CFG_INIT_RAM_ADDR 0x800000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET ( CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE ) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +/*Speed*/ +#define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ + +/*Flash*/ +#define CFG_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR +#define CFG_FLASH_SIZE (32*1024*1024) +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_EMPTY_INFO 1 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 259 +#define CFG_FLASH_PROTECTION +#define MTDIDS_DEFAULT "nor0=ml507-flash" +#define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)" + + +#endif /* __CONFIG_H */ |