diff options
Diffstat (limited to 'include/configs/microblaze-generic.h')
| -rw-r--r-- | include/configs/microblaze-generic.h | 280 |
1 files changed, 280 insertions, 0 deletions
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h new file mode 100644 index 0000000..ed4bf6d --- /dev/null +++ b/include/configs/microblaze-generic.h @@ -0,0 +1,280 @@ +/* + * (C) Copyright 2007-2008 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "../board/xilinx/microblaze-generic/xparameters.h" + +#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ +#define MICROBLAZE_V5 1 + +/* uart */ +#ifdef XILINX_UARTLITE_BASEADDR +#define CONFIG_XILINX_UARTLITE +#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR +#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE +#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } +#elif XILINX_UART16550_BASEADDR +#define CONFIG_SYS_NS16550 1 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 (XILINX_UART16550_BASEADDR + 0x1000 + 0x3) +#define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ +#define CONFIG_BAUDRATE 115200 + +/* The following table includes the supported baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} +#else +#error Undefined uart +#endif + +/* setting reset address */ +/*#define CONFIG_SYS_RESET_ADDRESS TEXT_BASE*/ + +/* ethernet */ +#ifdef XILINX_EMAC_BASEADDR +#define CONFIG_XILINX_EMAC 1 +#define CONFIG_SYS_ENET +#else +#ifdef XILINX_EMACLITE_BASEADDR +#define CONFIG_XILINX_EMACLITE 1 +#define CONFIG_SYS_ENET +#endif +#endif +#undef ET_DEBUG + +/* gpio */ +#ifdef XILINX_GPIO_BASEADDR +#define CONFIG_SYS_GPIO_0 1 +#define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR +#endif + +/* interrupt controller */ +#ifdef XILINX_INTC_BASEADDR +#define CONFIG_SYS_INTC_0 1 +#define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR +#define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS +#endif + +/* timer */ +#ifdef XILINX_TIMER_BASEADDR +#if (XILINX_TIMER_IRQ != -1) +#define CONFIG_SYS_TIMER_0 1 +#define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR +#define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ +#define FREQUENCE XILINX_CLOCK_FREQ +#define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 ) +#endif +#else +#ifdef XILINX_CLOCK_FREQ +#define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ +#else +#error BAD CLOCK FREQ +#endif +#endif +/* FSL */ +/* #define CONFIG_SYS_FSL_2 */ +/* #define FSL_INTR_2 1 */ + +/* + * memory layout - Example + * TEXT_BASE = 0x1200_0000; + * CONFIG_SYS_SRAM_BASE = 0x1000_0000; + * CONFIG_SYS_SRAM_SIZE = 0x0400_0000; + * + * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000 + * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000 + * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000 + * + * 0x1000_0000 CONFIG_SYS_SDRAM_BASE + * FREE + * 0x1200_0000 TEXT_BASE + * U-BOOT code + * 0x1202_0000 + * FREE + * + * STACK + * 0x13F7_F000 CONFIG_SYS_MALLOC_BASE + * MALLOC_AREA 256kB Alloc + * 0x11FB_F000 CONFIG_SYS_MONITOR_BASE + * MONITOR_CODE 256kB Env + * 0x13FF_F000 CONFIG_SYS_GBL_DATA_OFFSET + * GLOBAL_DATA 4kB bd, gd + * 0x1400_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE + */ + +/* ddr sdram - main memory */ +#define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START +#define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) + +/* global pointer */ +#define CONFIG_SYS_GBL_DATA_SIZE 0x1000 /* size of global data */ +/* start of global data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) + +/* monitor code */ +#define SIZE 0x40000 +#define CONFIG_SYS_MONITOR_LEN SIZE +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN) +#define CONFIG_SYS_MONITOR_END (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_SYS_MALLOC_LEN SIZE +#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) + +/* stack */ +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MONITOR_BASE + +/*#define RAMENV */ +#define FLASH + +#ifdef FLASH + #define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START + #define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE + #define CONFIG_SYS_FLASH_CFI 1 + #define CONFIG_FLASH_CFI_DRIVER 1 + #define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* ?empty sector */ + #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ + #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */ + + #ifdef RAMENV + #define CONFIG_ENV_IS_NOWHERE 1 + #define CONFIG_ENV_SIZE 0x1000 + #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) + + #else /* !RAMENV */ + #define CONFIG_ENV_IS_IN_FLASH 1 + #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) + #define CONFIG_ENV_SIZE 0x40000 + #endif /* !RAMBOOT */ +#else /* !FLASH */ + /* ENV in RAM */ + #define CONFIG_SYS_NO_FLASH 1 + #define CONFIG_ENV_IS_NOWHERE 1 + #define CONFIG_ENV_SIZE 0x1000 + #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) + #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */ +#endif /* !FLASH */ + +/* system ace */ +#ifdef XILINX_SYSACE_BASEADDR + #define CONFIG_SYSTEMACE + /* #define DEBUG_SYSTEMACE */ + #define SYSTEMACE_CONFIG_FPGA + #define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR + #define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH + #define CONFIG_DOS_PARTITION +#endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MFSL + +#ifndef CONFIG_SYS_ENET + #undef CONFIG_CMD_NET +#else + #define CONFIG_CMD_PING +#endif + +#if defined(CONFIG_SYSTEMACE) + #define CONFIG_CMD_EXT2 + #define CONFIG_CMD_FAT +#endif + +#if defined(FLASH) + #define CONFIG_CMD_ECHO + #define CONFIG_CMD_FLASH + #define CONFIG_CMD_IMLS + #define CONFIG_CMD_JFFS2 + + #if !defined(RAMENV) + #define CONFIG_CMD_ENV + #define CONFIG_CMD_SAVES + #endif +#else + #undef CONFIG_CMD_FLASH +#endif + +#if defined(CONFIG_CMD_JFFS2) +/* JFFS2 partitions */ +#define CONFIG_JFFS2_CMDLINE /* mtdparts command line support */ +#define MTDIDS_DEFAULT "nor0=ml401-0" + +/* default mtd partition table */ +#define MTDPARTS_DEFAULT "mtdparts=ml401-0:256k(u-boot),"\ + "256k(env),3m(kernel),1m(romfs),"\ + "1m(cramfs),-(jffs2)" +#endif + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_PROMPT "U-Boot-mONStR> " +#define CONFIG_SYS_CBSIZE 512 /* size of console buffer */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */ +#define CONFIG_SYS_MAXARGS 15 /* max number of command args */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_LOAD_ADDR 0x12000000 /* default load address */ + +#define CONFIG_BOOTDELAY 30 +#define CONFIG_BOOTARGS "root=romfs" +#define CONFIG_HOSTNAME "ml401" +#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" +#define CONFIG_IPADDR 192.168.0.3 +#define CONFIG_SERVERIP 192.168.0.5 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_ETHADDR 00:E0:0C:00:00:FD + +/* architecture dependent code */ +#define CONFIG_SYS_USR_EXCEP /* user exception */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo" + +#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ + "nor0=ml401-0\0"\ + "mtdparts=mtdparts=ml401-0:"\ + "256k(u-boot),256k(env),3m(kernel),"\ + "1m(romfs),1m(cramfs),-(jffs2)\0" + +#define CONFIG_CMDLINE_EDITING + +#endif /* __CONFIG_H */ |