diff options
Diffstat (limited to 'include/configs/mgcoge3un.h')
| -rw-r--r-- | include/configs/mgcoge3un.h | 78 |
1 files changed, 78 insertions, 0 deletions
diff --git a/include/configs/mgcoge3un.h b/include/configs/mgcoge3un.h new file mode 100644 index 0000000..6d56d7d --- /dev/null +++ b/include/configs/mgcoge3un.h @@ -0,0 +1,78 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Prafulla Wadaskar <prafulla@marvell.com> + * + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2010-2011 + * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* for linking errors see + * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */ + +#ifndef _CONFIG_MGCOGE3UN_H +#define _CONFIG_MGCOGE3UN_H + +/* include common defines/options for all arm based Keymile boards */ +#include "km/km_arm.h" + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING "\nKeymile MGCOGE3UN" +#define CONFIG_HOSTNAME mgcoge3un +#define CONFIG_MGCOGE3UN + +#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ +#define KM_ENV_BUS "pca9547:70:d" /* I2C2 (Mux-Port 5)*/ + +/* we use a new RAM type on mgcoge3un board */ +#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg + +/* + * mgcoge3un has a fixed link to the marvell switch + * with 100MB full duplex and autoneg off, for this + * reason we have to change the default settings + */ +#define PORT_SERIAL_CONTROL_VALUE ( \ + MVGBE_FORCE_LINK_PASS | \ + MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ + MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ + MVGBE_ADV_NO_FLOW_CTRL | \ + MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ + MVGBE_FORCE_BP_MODE_NO_JAM | \ + (1 << 9) /* Reserved bit has to be 1 */ | \ + MVGBE_DO_NOT_FORCE_LINK_FAIL | \ + MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ + MVGBE_DTE_ADV_0 | \ + MVGBE_MIIPHY_MAC_MODE | \ + MVGBE_AUTO_NEG_NO_CHANGE | \ + MVGBE_MAX_RX_PACKET_1552BYTE | \ + MVGBE_CLR_EXT_LOOPBACK | \ + MVGBE_SET_FULL_DUPLEX_MODE | \ + MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ + MVGBE_SET_GMII_SPEED_TO_10_100 |\ + MVGBE_SET_MII_SPEED_TO_100) + +#endif /* _CONFIG_MGCOGE3UN_H */ |