diff options
Diffstat (limited to 'include/configs/mcc200.h')
| -rw-r--r-- | include/configs/mcc200.h | 125 |
1 files changed, 88 insertions, 37 deletions
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index ce33b85..0c935bf 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -37,12 +37,12 @@ #define CONFIG_MISC_INIT_R -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* @@ -51,16 +51,36 @@ * To select console on the one of 8 external UARTs, * define CONFIG_QUART_CONSOLE as 1, 2, 3, or 4 for the first Quad UART, * or as 5, 6, 7, or 8 for the second Quad UART. + * COM11, COM12, COM13, COM14 are located on the second Quad UART. * * CONFIG_PSC_CONSOLE must be undefined in this case. */ -/* #define CONFIG_QUART_CONSOLE 1 */ /* console is on UART1 of QUART1 */ +#if !defined(CONFIG_PRS200) +/* MCC200 configuration: */ +#ifdef CONFIG_CONSOLE_COM12 +#define CONFIG_QUART_CONSOLE 6 /* console is on UARTF of QUART2 */ +#else +#define CONFIG_QUART_CONSOLE 8 /* console is on UARTH of QUART2 */ +#endif +#else +/* PRS200 configuration: */ +#undef CONFIG_QUART_CONSOLE +#endif /* CONFIG_PRS200 */ /* * To select console on PSC1, define CONFIG_PSC_CONSOLE as 1 * and undefine CONFIG_QUART_CONSOLE. */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) +#if !defined(CONFIG_PRS200) +/* MCC200 configuration: */ +#define CONFIG_SERIAL_MULTI 1 +#define CONFIG_PSC_CONSOLE 1 /* PSC1 may be COM */ +#define CONFIG_PSC_CONSOLE2 2 /* PSC2 is PSoC */ +#else +/* PRS200 configuration: */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#endif +#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) && \ + !defined(CONFIG_SERIAL_MULTI) #error "Select only one console device!" #endif #define CONFIG_BAUDRATE 115200 @@ -72,7 +92,7 @@ /* USB */ #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE /* @@ -98,33 +118,46 @@ #undef CONFIG_BOOTARGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#ifdef CONFIG_PRS200 +# define CFG__BOARDNAME "prs200" +# define CFG__LINUX_CONSOLE "ttyS0" +#else +# define CFG__BOARDNAME "mcc200" +# define CFG__LINUX_CONSOLE "ttyEU7" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ - "hostname=mcc200\0" \ + "hostname=" CFG__BOARDNAME "\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=${console},${baudrate}\0" \ + "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ + "flash_self=run ramargs addip addcons;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "net_nfs=tftp 200000 ${bootfile};" \ + "run nfsargs addip addcons;bootm\0" \ + "console=" CFG__LINUX_CONSOLE "\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=/tftpboot/mcc200/uImage\0" \ - "baudrate=115200\0" \ - "load=tftp 200000 /tftpboot/mcc200/u-boot.bin\0" \ - "update=protect off FFF00000 +${filesize};" \ - "era FFF00000 +${filesize};" \ - "cp.b 200000 FFF00000 ${filesize}\0" \ - "serverip=192.168.1.1\0" \ - "ipaddr=192.168.133.144\0" \ - "netmask=255.255.0.0\0" \ + "bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0" \ + "load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0" \ + "text_base=" MK_STR(TEXT_BASE) "\0" \ + "update=protect off ${text_base} +${filesize};" \ + "era ${text_base} +${filesize};" \ + "cp.b 200000 ${text_base} ${filesize}\0" \ "unlock=yes\0" \ - "ethaddr=00:02:44:7D:73:3B\0" \ "" +#undef MK_STR +#undef XMK_STR #define CONFIG_BOOTCOMMAND "run flash_self" @@ -134,7 +167,7 @@ /* * IPB Bus clocking configuration. */ -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ /* * I2C configuration @@ -150,9 +183,9 @@ * TEXT base always at 0xFFF00000 * ENV_ADDR always at 0xFFF40000 * FLASH_BASE at 0xFC000000 for 64 MB (only 32MB are supported, not enough addr lines!!!) - * 0xFE000000 for 32 MB - * 0xFF000000 for 16 MB - * 0xFF800000 for 8 MB + * 0xFE000000 for 32 MB + * 0xFF000000 for 16 MB + * 0xFF800000 for 8 MB */ #define CFG_FLASH_BASE 0xfc000000 #define CFG_FLASH_SIZE 0x04000000 @@ -174,9 +207,9 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ -#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -206,7 +239,7 @@ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_BASE TEXT_BASE #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) # define CFG_RAMBOOT 1 #endif @@ -226,27 +259,45 @@ #define CONFIG_PHY_ADDR 1 /* + * LCD Splash Screen + */ +#if !defined(CONFIG_PRS200) +#define CONFIG_LCD 1 +#endif + +#if defined(CONFIG_LCD) +#define CONFIG_SPLASH_SCREEN 1 +#define CFG_CONSOLE_IS_IN_ENV 1 +#define LCD_BPP LCD_MONOCHROME +#endif + +/* * GPIO configuration */ /* 0x10000004 = 32MB SDRAM */ /* 0x90000004 = 64MB SDRAM */ +#if defined(CONFIG_LCD) +/* set PSC2 in UART mode */ +#define CFG_GPS_PORT_CONFIG 0x00000044 +#else #define CFG_GPS_PORT_CONFIG 0x00000004 +#endif /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ #define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ #define CFG_LOAD_ADDR 0x100000 /* default load address */ @@ -309,7 +360,7 @@ * One of four SC16C554 UARTs is selected with * A3-A4 (DA5-DA6) lines. */ -#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) +#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) && !defined(CONFIG_PRS200) #define CFG_NS16550_COM1 (CFG_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5) #elif (CONFIG_QUART_CONSOLE > 4) && (CONFIG_QUART_CONSOLE < 9) #define CFG_NS16550_COM1 (CFG_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5) |