diff options
Diffstat (limited to 'include/configs/m28evk.h')
| -rw-r--r-- | include/configs/m28evk.h | 303 |
1 files changed, 303 insertions, 0 deletions
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h new file mode 100644 index 0000000..d4bd207 --- /dev/null +++ b/include/configs/m28evk.h @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __M28_H__ +#define __M28_H__ + +#include <asm/arch/regs-base.h> + +/* + * SoC configurations + */ +#define CONFIG_MX28 /* i.MX28 SoC */ +#define CONFIG_MXS_GPIO /* GPIO control */ +#define CONFIG_SYS_HZ 1000 /* Ticks per second */ + +/* + * Define M28EVK machine type by hand until it lands in mach-types + */ +#define MACH_TYPE_M28EVK 3613 + +#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_ARCH_MISC_INIT + +/* + * SPL + */ +#define CONFIG_SPL +#define CONFIG_SPL_NO_CPU_SUPPORT_CODE +#define CONFIG_SPL_START_S_PATH "board/denx/m28evk" +#define CONFIG_SPL_LDSCRIPT "board/denx/m28evk/u-boot-spl.lds" + +/* + * U-Boot Commands + */ +#include <config_cmd_default.h> +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_CMD_USB + +/* + * Memory configurations + */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x40000000 /* Base address */ +#define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */ +#define CONFIG_STACKSIZE 0x00010000 /* 128 KB stack */ +#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */ +#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */ +#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +/* Point initial SP in SRAM so SPL can use it too. */ +#define CONFIG_SYS_INIT_SP_ADDR 0x00002000 +/* + * We need to sacrifice first 4 bytes of RAM here to avoid triggering some + * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot + * binary. In case there was more of this mess, 0x100 bytes are skipped. + */ +#define CONFIG_SYS_TEXT_BASE 0x40000100 + +/* + * U-Boot general configurations + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print buffer size */ +#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + /* Boot argument buffer size */ +#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ +#define CONFIG_AUTO_COMPLETE /* Command auto complete */ +#define CONFIG_CMDLINE_EDITING /* Command history etc */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* + * Serial Driver + */ +#define CONFIG_PL011_SERIAL +#define CONFIG_PL011_CLOCK 24000000 +#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } +#define CONFIG_CONS_INDEX 0 +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * MMC Driver + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MXS_MMC +#endif + +/* + * NAND + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_MXS +#define CONFIG_APBH_DMA +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x60000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define NAND_MAX_CHIPS 8 + +/* Environment is in NAND */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE (16 * 1024) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_RANGE (512 * 1024) +#define CONFIG_ENV_OFFSET 0x300000 +#define CONFIG_ENV_OFFSET_REDUND \ + (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) + +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nand0=gpmi-nand.0" +#define MTDPARTS_DEFAULT \ + "mtdparts=gpmi-nand.0:" \ + "3m(bootloader)ro," \ + "512k(environment)," \ + "512k(redundant-environment)," \ + "4m(kernel)," \ + "-(filesystem)" +#endif + +/* + * Ethernet on SOC (FEC) + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_NET_MULTI +#define CONFIG_ETHPRIME "FEC0" +#define CONFIG_FEC_MXC +#define CONFIG_FEC_MXC_MULTI +#define CONFIG_MII +#define CONFIG_DISCOVER_PHY +#define CONFIG_FEC_XCV_TYPE RMII +#endif + +/* + * I2C + */ +#ifdef CONFIG_CMD_I2C +#define CONFIG_I2C_MXS +#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SPEED 400000 +#endif + +/* + * EEPROM + */ +#ifdef CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#endif + +/* + * RTC + */ +#ifdef CONFIG_CMD_DATE +/* Use the internal RTC in the MXS chip */ +#define CONFIG_RTC_INTERNAL +#ifdef CONFIG_RTC_INTERNAL +#define CONFIG_RTC_MXS +#else +#define CONFIG_RTC_M41T62 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_M41T11_BASE_YEAR 2000 +#endif +#endif + +/* + * USB + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MXS +#define CONFIG_EHCI_MXS_PORT 1 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#endif + +/* + * SPI + */ +#ifdef CONFIG_CMD_SPI +#define CONFIG_HARD_SPI +#define CONFIG_MXS_SPI +#define CONFIG_SPI_HALF_DUPLEX +#define CONFIG_DEFAULT_SPI_BUS 2 +#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 + +/* SPI FLASH */ +#ifdef CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_CS 2 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 24000000 + +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_BUS 2 +#define CONFIG_ENV_SPI_MAX_HZ 24000000 +#define CONFIG_ENV_SPI_MODE SPI_MODE_0 +#endif +#endif + +/* + * Boot Linux + */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyAM0,115200n8 " +#define CONFIG_BOOTCOMMAND "run bootcmd_net" +#define CONFIG_LOADADDR 0x42000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* + * Extra Environments + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "update_nand_full_filename=u-boot.nand\0" \ + "update_nand_firmware_filename=u-boot.sb\0" \ + "update_nand_firmware_maxsz=0x100000\0" \ + "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \ + "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \ + "update_nand_get_fcb_size=" /* Get size of FCB blocks */ \ + "nand device 0 ; " \ + "nand info ; " \ + "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \ + "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \ + "update_nand_full=" /* Update FCB, DBBT and FW */ \ + "if tftp ${update_nand_full_filename} ; then " \ + "run update_nand_get_fcb_size ; " \ + "nand scrub -y 0x0 ${filesize} ; " \ + "nand write.raw ${loadaddr} 0x0 ${update_nand_fcb} ; " \ + "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \ + "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \ + "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \ + "fi\0" \ + "update_nand_firmware=" /* Update only firmware */ \ + "if tftp ${update_nand_firmware_filename} ; then " \ + "run update_nand_get_fcb_size ; " \ + "setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \ + "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \ + "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \ + "nand erase ${fcb_sz} ${fw_sz} ; " \ + "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \ + "nand write ${loadaddr} ${fw_off} ${filesize} ; " \ + "fi\0" + +#endif /* __M28_H__ */ |