diff options
Diffstat (limited to 'include/configs/lwmon5.h')
| -rw-r--r-- | include/configs/lwmon5.h | 36 |
1 files changed, 28 insertions, 8 deletions
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 1d87c73..5ebe440 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -46,7 +46,7 @@ #define CFG_BOOT_BASE_ADDR 0xf0000000 #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ +#define CFG_FLASH_BASE 0xf8000000 /* start of FLASH */ #define CFG_MONITOR_BASE TEXT_BASE #define CFG_LIME_BASE_0 0xc0000000 #define CFG_LIME_BASE_1 0xc1000000 @@ -74,11 +74,13 @@ /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ #define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ #define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ +#define CFG_OCM_DATA_ADDR CFG_OCM_BASE #define CFG_INIT_RAM_END (4 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) +#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR /*----------------------------------------------------------------------- * Serial Port @@ -103,9 +105,11 @@ #define CFG_FLASH_CFI /* The flash is CFI compatible */ #define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH0 0xFC000000 +#define CFG_FLASH1 0xF8000000 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH1, CFG_FLASH0 } -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ @@ -133,6 +137,9 @@ #define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */ #if 0 /* test-only: disable ECC for now */ #define CONFIG_DDR_ECC 1 /* enable ECC */ + +/* POST support */ +#define CONFIG_POST (CFG_POST_ECC) #endif /*----------------------------------------------------------------------- @@ -162,6 +169,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=lwmon5\0" \ "netdev=eth0\0" \ + "unlock=yes\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -183,6 +191,8 @@ "update=protect off FFF80000 FFFFFFFF;era FFF80000 FFFFFFFF;" \ "cp.b 200000 FFF80000 80000\0" \ "upd=run load;run update\0" \ + "lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;" \ + "autoscr 200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -310,7 +320,7 @@ /* Memory Bank 0 (NOR-FLASH) initialization */ #define CFG_EBC_PB0AP 0x03050200 -#define CFG_EBC_PB0CR (CFG_FLASH | 0xdc000) +#define CFG_EBC_PB0CR (CFG_FLASH | 0xfc000) /* Memory Bank 1 (Lime) initialization */ #define CFG_EBC_PB1AP 0x01004380 @@ -330,14 +340,24 @@ * Graphics (Fujitsu Lime) *----------------------------------------------------------------------*/ /* SDRAM Clock frequency adjustment register */ -#define CFG_LIME_SDRAM_CLOCK 0xC1FC0000 -/* Lime Clock frequency is to set 133MHz */ +#define CFG_LIME_SDRAM_CLOCK 0xC1FC0038 +/* Lime Clock frequency is to set 100MHz */ +#define CFG_LIME_CLOCK_100MHZ 0x00000 +#if 0 +/* Lime Clock frequency for 133MHz */ #define CFG_LIME_CLOCK_133MHZ 0x10000 +#endif /* SDRAM Parameter register */ #define CFG_LIME_MMR 0xC1FCFFFC -/* SDRAM parameter value */ +/* SDRAM parameter value; was 0x414FB7F2, caused several vertical bars + and pixel flare on display when 133MHz was configured. According to + SDRAM chip datasheet CAS Latency is 3 for 133MHz and -75 Speed Grade */ +#ifdef CFG_LIME_CLOCK_133MHZ +#define CFG_LIME_MMR_VALUE 0x414FB7F3 +#else #define CFG_LIME_MMR_VALUE 0x414FB7F2 +#endif /*----------------------------------------------------------------------- * GPIO Setup |