diff options
Diffstat (limited to 'include/configs/ls1021atwr.h')
| -rw-r--r-- | include/configs/ls1021atwr.h | 95 |
1 files changed, 94 insertions, 1 deletions
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 3eac7ee..66954d0 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -35,6 +35,43 @@ #define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_DDR_CLK_FREQ 100000000 +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg +#endif + +#ifdef CONFIG_SD_BOOT +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_WATCHDOG_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 + +#define CONFIG_SPL_TEXT_BASE 0x10000000 +#define CONFIG_SPL_MAX_SIZE 0x1a000 +#define CONFIG_SPL_STACK 0x1001d000 +#define CONFIG_SPL_PAD_TO 0x1c000 +#define CONFIG_SYS_TEXT_BASE 0x82000000 + +#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 +#define CONFIG_SPL_BSS_START_ADDR 0x80100000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_MONITOR_LEN 0x80000 +#endif + +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_NO_FLASH +#endif + #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0x67f80000 #endif @@ -50,13 +87,15 @@ #define CONFIG_FSL_CAAM /* Enable CAAM */ -#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI) +#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \ + !defined(CONFIG_QSPI_BOOT) #define CONFIG_U_QE #endif /* * IFC Definitions */ +#ifndef CONFIG_QSPI_BOOT #define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -100,6 +139,7 @@ #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define CONFIG_SYS_WRITE_SWAPPED_DATA +#endif /* CPLD */ @@ -180,6 +220,21 @@ #define CONFIG_FSL_ESDHC #define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +/* QSPI */ +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_FSL_QSPI +#define QSPI0_AMBA_BASE 0x40000000 +#define FSL_QSPI_FLASH_SIZE (1 << 24) +#define FSL_QSPI_FLASH_NUM 2 + +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#endif + /* * Video */ @@ -236,6 +291,13 @@ #define CONFIG_HAS_ETH2 #endif +/* PCIe */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 /* PCIE controler 2 */ +#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ +#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" + #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII @@ -243,7 +305,20 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_CMDLINE_EDITING + +#ifdef CONFIG_QSPI_BOOT +#undef CONFIG_CMD_IMLS +#else #define CONFIG_CMD_IMLS +#endif + +#define CONFIG_ARMV7_NONSEC +#define CONFIG_ARMV7_VIRT +#define CONFIG_PEN_ADDR_BIG_ENDIAN +#define CONFIG_LS102XA_NS_ACCESS +#define CONFIG_SMP_PEN_ADDR 0x01ee0200 +#define CONFIG_TIMER_CLK_FREQ 12500000 +#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 @@ -277,6 +352,8 @@ #define CONFIG_SYS_LOAD_ADDR 0x82000000 +#define CONFIG_LS102XA_STREAM_ID + /* * Stack sizes * The stack sizes are set up in start.S using the settings below @@ -288,7 +365,11 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#endif #define CONFIG_SYS_QE_FW_ADDR 0x67f40000 @@ -297,10 +378,22 @@ */ #define CONFIG_ENV_OVERWRITE +#if defined(CONFIG_SD_BOOT) +#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x20000 +#elif defined(CONFIG_QSPI_BOOT) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE 0x20000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif #define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP |