diff options
Diffstat (limited to 'include/configs/lpd7a404.h')
| -rw-r--r-- | include/configs/lpd7a404.h | 112 |
1 files changed, 112 insertions, 0 deletions
diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h new file mode 100644 index 0000000..de465ea --- /dev/null +++ b/include/configs/lpd7a404.h @@ -0,0 +1,112 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __LPD7A404_H_ +#define __LPD7A404_H_ + +#define CONFIG_LPD7A404 /* Logic LH7A400 SDK */ + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +#undef CONFIG_USE_IRQ + +/* + * This board uses the logic LH7A404-10 card engine + */ +#include <configs/lpd7a404-10.h> + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * select serial console configuration + */ +#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_IPADDR 192.168.1.100 +#define CONFIG_NETMASK 255.255.1.0 +#define CONFIG_SERVERIP 192.168.1.1 + +#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ + +#ifndef USE_920T_MMU +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE)) +#else +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE) +#endif + + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 3 + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +/* what's this ? it's not used anywhere */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "LPD7A404> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0xc0300000 /* memtest works on */ +#define CFG_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xc0f00000 /* default load address */ + +/* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* size and location of u-boot in flash */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MONITOR_LEN (256<<10) + +#define CFG_ENV_IS_IN_FLASH 1 + +/* Address and size of Primary Environment Sector */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0xFC0000) +#define CFG_ENV_SIZE 0x40000 + +#endif /* __LPD7A404_H_ */ |