diff options
Diffstat (limited to 'include/configs/linkstation.h')
| -rw-r--r-- | include/configs/linkstation.h | 262 |
1 files changed, 131 insertions, 131 deletions
diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h index be2f71c..2feb3ae 100644 --- a/include/configs/linkstation.h +++ b/include/configs/linkstation.h @@ -106,20 +106,20 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) -#define CFG_MAXARGS 16 /* Max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR 0x00800000 /* Default load address: 8 MB */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* Default load address: 8 MB */ #define CONFIG_BOOTCOMMAND "run bootcmd1" #define CONFIG_BOOTARGS "root=/dev/sda1 console=ttyS1,57600 netconsole=@192.168.1.7/eth0,@192.168.1.1/00:50:BF:A4:59:71 rtc-rs5c372.probe=0,0x32 debug" #define CONFIG_NFSBOOTCOMMAND "bootp;run nfsargs;bootm" -#define CFG_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_IS_IN_ENV #define XMK_STR(x) #x #define MK_STR(x) XMK_STR(x) @@ -213,30 +213,30 @@ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0xFFC00000 -#define CFG_FLASH_SIZE 0x00400000 -#define CFG_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_FLASH_BASE 0xFFC00000 +#define CONFIG_SYS_FLASH_SIZE 0x00400000 +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE -#define CFG_RESET_ADDRESS 0xFFF00100 -#define CFG_EUMB_ADDR 0x80000000 -#define CFG_PCI_MEM_ADDR 0xB0000000 -#define CFG_MISC_REGION_ADDR 0xFE000000 +#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 +#define CONFIG_SYS_EUMB_ADDR 0x80000000 +#define CONFIG_SYS_PCI_MEM_ADDR 0xB0000000 +#define CONFIG_SYS_MISC_REGION_ADDR 0xFE000000 -#define CFG_MONITOR_LEN 0x00040000 /* 256 kB */ -#define CFG_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */ +#define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256 kB */ +#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */ -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */ /* Maximum amount of RAM */ #if defined(CONFIG_HLAN) || defined(CONFIG_LAN) -#define CFG_MAX_RAM_SIZE 0x04000000 /* 64MB of SDRAM */ +#define CONFIG_SYS_MAX_RAM_SIZE 0x04000000 /* 64MB of SDRAM */ #elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) -#define CFG_MAX_RAM_SIZE 0x08000000 /* 128MB of SDRAM */ +#define CONFIG_SYS_MAX_RAM_SIZE 0x08000000 /* 128MB of SDRAM */ #else #error Unknown LinkStation type #endif @@ -249,38 +249,38 @@ * * Always do "make clean" after changing the build type */ -#if CFG_MONITOR_BASE < CFG_FLASH_BASE -#define CFG_RAMBOOT +#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_RAMBOOT #endif /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area */ #if 1 /* RAM is available when the first C function is called */ -#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + CFG_MAX_RAM_SIZE - 0x1000) +#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE - 0x1000) #else -#define CFG_INIT_RAM_ADDR 0x40000000 +#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #endif -#define CFG_INIT_RAM_END 0x1000 -#define CFG_GBL_DATA_SIZE 128 -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) /*---------------------------------------------------------------------- * Serial configuration */ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 57600 -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CFG_NS16550 -#define CFG_NS16550_SERIAL +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CFG_NS16550_CLK get_bus_freq(0) +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4600) /* Console port */ -#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4500) /* AVR port */ +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4600) /* Console port */ +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4500) /* AVR port */ /* * Low Level Configuration Settings @@ -300,54 +300,54 @@ /* FIXME: 32.768 MHz is the crystal frequency but */ /* the real frequency is lower by about 0.75% */ #define CONFIG_SYS_CLK_FREQ 32768000 -#define CFG_HZ 1000 +#define CONFIG_SYS_HZ 1000 /* Bit-field values for MCCR1. */ -#define CFG_ROMNAL 0 -#define CFG_ROMFAL 11 - -#define CFG_BANK0_ROW 2 /* Only bank 0 used: 13 x n x 4 */ -#define CFG_BANK1_ROW 0 -#define CFG_BANK2_ROW 0 -#define CFG_BANK3_ROW 0 -#define CFG_BANK4_ROW 0 -#define CFG_BANK5_ROW 0 -#define CFG_BANK6_ROW 0 -#define CFG_BANK7_ROW 0 +#define CONFIG_SYS_ROMNAL 0 +#define CONFIG_SYS_ROMFAL 11 + +#define CONFIG_SYS_BANK0_ROW 2 /* Only bank 0 used: 13 x n x 4 */ +#define CONFIG_SYS_BANK1_ROW 0 +#define CONFIG_SYS_BANK2_ROW 0 +#define CONFIG_SYS_BANK3_ROW 0 +#define CONFIG_SYS_BANK4_ROW 0 +#define CONFIG_SYS_BANK5_ROW 0 +#define CONFIG_SYS_BANK6_ROW 0 +#define CONFIG_SYS_BANK7_ROW 0 /* Bit-field values for MCCR2. */ -#define CFG_TSWAIT 0 +#define CONFIG_SYS_TSWAIT 0 #if defined(CONFIG_LAN) || defined(CONFIG_HLAN) -#define CFG_REFINT 0x15e0 +#define CONFIG_SYS_REFINT 0x15e0 #elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) -#define CFG_REFINT 0x1580 +#define CONFIG_SYS_REFINT 0x1580 #endif /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ -#define CFG_BSTOPRE 0x91c +#define CONFIG_SYS_BSTOPRE 0x91c /* Bit-field values for MCCR3. */ -#define CFG_REFREC 7 +#define CONFIG_SYS_REFREC 7 /* Bit-field values for MCCR4. */ -#define CFG_PRETOACT 2 -#define CFG_ACTTOPRE 2 /* Original value was 2 */ -#define CFG_ACTORW 2 +#define CONFIG_SYS_PRETOACT 2 +#define CONFIG_SYS_ACTTOPRE 2 /* Original value was 2 */ +#define CONFIG_SYS_ACTORW 2 #if defined(CONFIG_LAN) || defined(CONFIG_HLAN) -#define CFG_SDMODE_CAS_LAT 2 /* For 100MHz bus */ -/*#define CFG_SDMODE_BURSTLEN 3*/ +#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* For 100MHz bus */ +/*#define CONFIG_SYS_SDMODE_BURSTLEN 3*/ #elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) -#define CFG_SDMODE_CAS_LAT 3 /* For 133MHz bus */ -/*#define CFG_SDMODE_BURSTLEN 2*/ +#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* For 133MHz bus */ +/*#define CONFIG_SYS_SDMODE_BURSTLEN 2*/ #endif -#define CFG_REGISTERD_TYPE_BUFFER 1 -#define CFG_EXTROM 1 /* Original setting but there is no EXTROM */ -#define CFG_REGDIMM 0 -#define CFG_DBUS_SIZE2 1 -#define CFG_SDMODE_WRAP 0 +#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 +#define CONFIG_SYS_EXTROM 1 /* Original setting but there is no EXTROM */ +#define CONFIG_SYS_REGDIMM 0 +#define CONFIG_SYS_DBUS_SIZE2 1 +#define CONFIG_SYS_SDMODE_WRAP 0 -#define CFG_PGMAX 0x32 /* All boards use this setting. Original 0x92 */ -#define CFG_SDRAM_DSCD 0x30 +#define CONFIG_SYS_PGMAX 0x32 /* All boards use this setting. Original 0x92 */ +#define CONFIG_SYS_SDRAM_DSCD 0x30 /* Memory bank settings. * Only bits 20-29 are actually used from these vales to set the @@ -356,32 +356,32 @@ * address. Refer to the MPC8240 book. */ -#define CFG_BANK0_START 0x00000000 -#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1) -#define CFG_BANK0_ENABLE 1 -#define CFG_BANK1_START 0x3ff00000 -#define CFG_BANK1_END 0x3fffffff -#define CFG_BANK1_ENABLE 0 -#define CFG_BANK2_START 0x3ff00000 -#define CFG_BANK2_END 0x3fffffff -#define CFG_BANK2_ENABLE 0 -#define CFG_BANK3_START 0x3ff00000 -#define CFG_BANK3_END 0x3fffffff -#define CFG_BANK3_ENABLE 0 -#define CFG_BANK4_START 0x3ff00000 -#define CFG_BANK4_END 0x3fffffff -#define CFG_BANK4_ENABLE 0 -#define CFG_BANK5_START 0x3ff00000 -#define CFG_BANK5_END 0x3fffffff -#define CFG_BANK5_ENABLE 0 -#define CFG_BANK6_START 0x3ff00000 -#define CFG_BANK6_END 0x3fffffff -#define CFG_BANK6_ENABLE 0 -#define CFG_BANK7_START 0x3ff00000 -#define CFG_BANK7_END 0x3fffffff -#define CFG_BANK7_ENABLE 0 - -#define CFG_ODCR 0x15 +#define CONFIG_SYS_BANK0_START 0x00000000 +#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) +#define CONFIG_SYS_BANK0_ENABLE 1 +#define CONFIG_SYS_BANK1_START 0x3ff00000 +#define CONFIG_SYS_BANK1_END 0x3fffffff +#define CONFIG_SYS_BANK1_ENABLE 0 +#define CONFIG_SYS_BANK2_START 0x3ff00000 +#define CONFIG_SYS_BANK2_END 0x3fffffff +#define CONFIG_SYS_BANK2_ENABLE 0 +#define CONFIG_SYS_BANK3_START 0x3ff00000 +#define CONFIG_SYS_BANK3_END 0x3fffffff +#define CONFIG_SYS_BANK3_ENABLE 0 +#define CONFIG_SYS_BANK4_START 0x3ff00000 +#define CONFIG_SYS_BANK4_END 0x3fffffff +#define CONFIG_SYS_BANK4_ENABLE 0 +#define CONFIG_SYS_BANK5_START 0x3ff00000 +#define CONFIG_SYS_BANK5_END 0x3fffffff +#define CONFIG_SYS_BANK5_ENABLE 0 +#define CONFIG_SYS_BANK6_START 0x3ff00000 +#define CONFIG_SYS_BANK6_END 0x3fffffff +#define CONFIG_SYS_BANK6_ENABLE 0 +#define CONFIG_SYS_BANK7_START 0x3ff00000 +#define CONFIG_SYS_BANK7_END 0x3fffffff +#define CONFIG_SYS_BANK7_ENABLE 0 + +#define CONFIG_SYS_ODCR 0x15 /*---------------------------------------------------------------------- * Initial BAT mappings @@ -393,32 +393,32 @@ */ /* SDRAM */ -#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP) -#define CFG_DBAT0L CFG_IBAT0L -#define CFG_DBAT0U CFG_IBAT0U +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U /* EUMB: 1MB of address space */ -#define CFG_IBAT1L (CFG_EUMB_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CFG_IBAT1U (CFG_EUMB_ADDR | BATU_BL_1M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_EUMB_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_EUMB_ADDR | BATU_BL_1M | BATU_VS | BATU_VP) -#define CFG_DBAT1L (CFG_IBAT1L | BATL_GUARDEDSTORAGE) -#define CFG_DBAT1U CFG_IBAT1U +#define CONFIG_SYS_DBAT1L (CONFIG_SYS_IBAT1L | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U /* PCI Mem: 256MB of address space */ -#define CFG_IBAT2L (CFG_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CFG_IBAT2U (CFG_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT2L (CFG_IBAT2L | BATL_GUARDEDSTORAGE) -#define CFG_DBAT2U CFG_IBAT2U +#define CONFIG_SYS_DBAT2L (CONFIG_SYS_IBAT2L | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U /* PCI and local ROM/Flash: last 32MB of address space */ -#define CFG_IBAT3L (CFG_MISC_REGION_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CFG_IBAT3U (CFG_MISC_REGION_ADDR | BATU_BL_32M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_ADDR | BATU_BL_32M | BATU_VS | BATU_VP) -#define CFG_DBAT3L (CFG_IBAT3L | BATL_GUARDEDSTORAGE) -#define CFG_DBAT3U CFG_IBAT3U +#define CONFIG_SYS_DBAT3L (CONFIG_SYS_IBAT3L | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U /* * For booting Linux, the board info and command line data @@ -428,26 +428,26 @@ * FIXME: This doesn't appear to be true for the newer kernels * which map more that 8 MB */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#undef CFG_FLASH_PROTECTION -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } -#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CFG_MAX_FLASH_SECT 72 /* Max number of sectors per flash */ +#undef CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 72 /* Max number of sectors per flash */ -#define CFG_FLASH_ERASE_TOUT 12000 -#define CFG_FLASH_WRITE_TOUT 1000 +#define CONFIG_SYS_FLASH_ERASE_TOUT 12000 +#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ +#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ #define CONFIG_ENV_IS_IN_FLASH /* @@ -463,9 +463,9 @@ /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 +#define CONFIG_SYS_CACHELINE_SIZE 32 #ifdef CONFIG_CMD_KGDB -#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /*----------------------------------------------------------------------- @@ -477,20 +477,20 @@ #define CONFIG_LBA48 /* 48 bit LBA supported */ #if defined(CONFIG_LAN) || defined(CONFIG_HLAN) || defined(CONFIG_HGLAN) -#define CFG_IDE_MAXBUS 1 /* Scan only 1 IDE bus */ -#define CFG_IDE_MAXDEVICE 1 /* Only 1 drive per IDE bus */ +#define CONFIG_SYS_IDE_MAXBUS 1 /* Scan only 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 1 /* Only 1 drive per IDE bus */ #elif defined(CONFIG_HGTL) -#define CFG_IDE_MAXBUS 2 /* Max. 2 IDE busses */ -#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ +#define CONFIG_SYS_IDE_MAXBUS 2 /* Max. 2 IDE busses */ +#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ #else #error Config IDE: Unknown LinkStation type #endif -#define CFG_ATA_BASE_ADDR 0 +#define CONFIG_SYS_ATA_BASE_ADDR 0 -#define CFG_ATA_DATA_OFFSET 0 /* Offset for data I/O */ -#define CFG_ATA_REG_OFFSET 0 /* Offset for normal registers */ -#define CFG_ATA_ALT_OFFSET 0 /* Offset for alternate registers */ +#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* Offset for data I/O */ +#define CONFIG_SYS_ATA_REG_OFFSET 0 /* Offset for normal registers */ +#define CONFIG_SYS_ATA_ALT_OFFSET 0 /* Offset for alternate registers */ /*----------------------------------------------------------------------- * Partitions and file system |