diff options
Diffstat (limited to 'include/configs/km_kirkwood.h')
| -rw-r--r-- | include/configs/km_kirkwood.h | 141 |
1 files changed, 128 insertions, 13 deletions
diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index ed36124..fba181f 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -6,8 +6,9 @@ * (C) Copyright 2009 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * (C) Copyright 2011 - * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.de + * (C) Copyright 2011-2012 + * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com + * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com * * See file CREDITS for list of people who contributed to this * project. @@ -36,25 +37,139 @@ #ifndef _CONFIG_KM_KIRKWOOD_H #define _CONFIG_KM_KIRKWOOD_H +/* KM_KIRKWOOD */ +#if defined(CONFIG_KM_KIRKWOOD) +#define CONFIG_IDENT_STRING "\nKeymile Kirkwood" +#define CONFIG_HOSTNAME km_kirkwood +#define CONFIG_KM_DISABLE_PCIE +#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ + +/* KM_KIRKWOOD_PCI */ +#elif defined(CONFIG_KM_KIRKWOOD_PCI) +#define CONFIG_IDENT_STRING "\nKeymile Kirkwood PCI" +#define CONFIG_HOSTNAME km_kirkwood_pci +#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ +#define CONFIG_KM_FPGA_CONFIG + +/* KM_NUSA */ +#elif defined(CONFIG_KM_NUSA) +#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ +#define CONFIG_IDENT_STRING "\nKeymile NUSA" +#define CONFIG_HOSTNAME kmnusa +#undef CONFIG_SYS_KWD_CONFIG +#define CONFIG_SYS_KWD_CONFIG \ + $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg +#define CONFIG_KM_ENV_IS_IN_SPI_NOR +#define CONFIG_KM_FPGA_CONFIG +#define CONFIG_KM_PIGGY4_88E6352 + +/* KM_MGCOGE3UN */ +#elif defined(CONFIG_KM_MGCOGE3UN) +#define CONFIG_IDENT_STRING "\nKeymile COGE3UN" +#define CONFIG_HOSTNAME mgcoge3un +#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ +#undef CONFIG_SYS_KWD_CONFIG +#define CONFIG_SYS_KWD_CONFIG \ + $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg +#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0" +#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 +#define CONFIG_KM_DISABLE_PCIE +#define CONFIG_KM_PIGGY4_88E6061 + +/* KMCOGE5UN */ +#elif defined(CONFIG_KM_COGE5UN) +#define CONFIG_IDENT_STRING "\nKeymile COGE5UN" +#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ +#undef CONFIG_SYS_KWD_CONFIG +#define CONFIG_SYS_KWD_CONFIG \ + $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg +#define CONFIG_KM_ENV_IS_IN_SPI_NOR +#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 +#define CONFIG_HOSTNAME kmcoge5un +#define CONFIG_KM_DISABLE_PCIE +#define CONFIG_KM_PIGGY4_88E6352 + +/* KM_PORTL2 */ +#elif defined(CONFIG_KM_PORTL2) +#define CONFIG_IDENT_STRING "\nKeymile Port-L2" +#define CONFIG_HOSTNAME portl2 +#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ +#define CONFIG_KM_PIGGY4_88E6061 + +#else +#error ("Board unsupported") +#endif + /* include common defines/options for all arm based Keymile boards */ #include "km/km_arm.h" +#ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR +#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/ +#endif + +#if defined(CONFIG_KM_PIGGY4_88E6352) /* - * Version number information + * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via + * an Marvell 88E6352 simple switch. + * In this case we have to change the default settings for the etherent mac. + * There is NO ethernet phy. The ARM and Switch are conencted directly over + * RGMII in MAC-MAC mode + * In this case 1GBit full duplex and autoneg off */ -#ifdef CONFIG_KM_DISABLE_PCI -#define CONFIG_IDENT_STRING "\nKeymile Kirkwood" -#undef CONFIG_KIRKWOOD_PCIE_INIT -#else -#define CONFIG_IDENT_STRING "\nKeymile Kirkwood PCI" +#define PORT_SERIAL_CONTROL_VALUE ( \ + MVGBE_FORCE_LINK_PASS | \ + MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ + MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ + MVGBE_ADV_NO_FLOW_CTRL | \ + MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ + MVGBE_FORCE_BP_MODE_NO_JAM | \ + (1 << 9) /* Reserved bit has to be 1 */ | \ + MVGBE_DO_NOT_FORCE_LINK_FAIL | \ + MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ + MVGBE_DTE_ADV_0 | \ + MVGBE_MIIPHY_MAC_MODE | \ + MVGBE_AUTO_NEG_NO_CHANGE | \ + MVGBE_MAX_RX_PACKET_1552BYTE | \ + MVGBE_CLR_EXT_LOOPBACK | \ + MVGBE_SET_FULL_DUPLEX_MODE | \ + MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ + MVGBE_SET_GMII_SPEED_TO_1000 |\ + MVGBE_SET_MII_SPEED_TO_100) + #endif -#define CONFIG_HOSTNAME km_kirkwood +#ifdef CONFIG_KM_PIGGY4_88E6061 +/* + * Some keymile boards like mgcoge3un have their PIGGY4 connected via + * an Marvell 88E6061 simple switch. + * In this case we have to change the default settings for the + * ethernet phy connected to the kirkwood. + * In this case 100MB full duplex and autoneg off + */ +#define PORT_SERIAL_CONTROL_VALUE ( \ + MVGBE_FORCE_LINK_PASS | \ + MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ + MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ + MVGBE_ADV_NO_FLOW_CTRL | \ + MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ + MVGBE_FORCE_BP_MODE_NO_JAM | \ + (1 << 9) /* Reserved bit has to be 1 */ | \ + MVGBE_DO_NOT_FORCE_LINK_FAIL | \ + MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ + MVGBE_DTE_ADV_0 | \ + MVGBE_MIIPHY_MAC_MODE | \ + MVGBE_AUTO_NEG_NO_CHANGE | \ + MVGBE_MAX_RX_PACKET_1552BYTE | \ + MVGBE_CLR_EXT_LOOPBACK | \ + MVGBE_SET_FULL_DUPLEX_MODE | \ + MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ + MVGBE_SET_GMII_SPEED_TO_10_100 |\ + MVGBE_SET_MII_SPEED_TO_100) +#endif -#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ -#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/ +#ifdef CONFIG_KM_DISABLE_PCI +#undef CONFIG_KIRKWOOD_PCIE_INIT +#endif -/* GPIO Pin from kirkwood connected to PROGRAM_B pin of the xilinx FPGA */ -#define KM_XLX_PROGRAM_B_PIN 39 #endif /* _CONFIG_KM_KIRKWOOD */ |