diff options
Diffstat (limited to 'include/configs/km_arm.h')
| -rw-r--r-- | include/configs/km_arm.h | 191 |
1 files changed, 191 insertions, 0 deletions
diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h new file mode 100644 index 0000000..a928c2c --- /dev/null +++ b/include/configs/km_arm.h @@ -0,0 +1,191 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Prafulla Wadaskar <prafulla@marvell.com> + * + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* for linking errors see http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */ + +#ifndef _CONFIG_KM_ARM_H +#define _CONFIG_KM_ARM_H + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_MARVELL +#define CONFIG_ARM926EJS /* Basic Architecture */ +#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD /* SOC Family Name */ +#define CONFIG_KW88F6281 /* SOC Name */ +#define CONFIG_MACH_SUEN3 /* Machine type */ + +/* include common defines/options for all Keymile boards */ +#include "keymile-common.h" +#undef CONFIG_CMD_DTT +#undef CONFIG_BOOTCOUNT_LIMIT + +#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ +#undef CONFIG_KIRKWOOD_PCIE_INIT /* Disable PCIE Port0 for kernel */ +#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ + +#define CONFIG_MISC_INIT_R + +/* + * NS16550 Configuration + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE + +/* + * Serial Port configuration + * The following definitions let you select what serial you want to use + * for your console driver. + */ + +#define CONFIG_CONS_INDEX 1 /* Console on UART0 */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ + +/* + * Commands configuration + */ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NFS + +/* + * Without NOR FLASH we need this + */ +#define CONFIG_SYS_NO_FLASH +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS + +/* + * NAND Flash configuration + */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_NAND_KIRKWOOD +#define CONFIG_SYS_NAND_BASE 0xd8000000 + +#define BOOTFLASH_START 0x0 + +#define CONFIG_KM_CONSOLE_TTY "ttyS0" + +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Other required minimal configurations + */ +#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ +#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ +#define CONFIG_NR_DRAM_BANKS 4 +#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ + +/* + * Ethernet Driver configuration + */ +#define CONFIG_NETCONSOLE /* include NetConsole support */ +#define CONFIG_NET_MULTI /* specify more that one ports available */ +#define CONFIG_MII /* expose smi ove miiphy interface */ +#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ +#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */ +#define CONFIG_PHY_BASE_ADR 0 +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ +#define CONFIG_RESET_PHY_R /* use reset_phy() to init 88E1118 PHY */ + +/* + * UBI related stuff + */ +#define CONFIG_SYS_USE_UBI + +/* + * I2C related stuff + */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C /* I2C bit-banged */ + +#if defined(CONFIG_HARD_I2C) +#define CONFIG_I2C_KIRKWOOD +#define CONFIG_I2C_KW_REG_BASE KW_TWSI_BASE +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_SPEED 100000 +#endif + +#define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */ +#if defined(CONFIG_SOFT_I2C) +#ifndef __ASSEMBLY__ +#include <asm/arch-kirkwood/gpio.h> +extern void __set_direction(unsigned pin, int high); +void set_sda (int state); +void set_scl (int state); +int get_sda (void); +int get_scl (void); +#define SUEN3_SDA_PIN 8 +#define SUEN3_SCL_PIN 9 +#define SUEN3_ENV_WP 38 + +#define I2C_ACTIVE __set_direction(SUEN3_SDA_PIN, 0) +#define I2C_TRISTATE __set_direction(SUEN3_SDA_PIN, 1) +#define I2C_READ (kw_gpio_get_value(SUEN3_SDA_PIN) ? 1 : 0) +#define I2C_SDA(bit) kw_gpio_set_value(SUEN3_SDA_PIN, bit); +#define I2C_SCL(bit) kw_gpio_set_value(SUEN3_SCL_PIN, bit); +#endif + +#define I2C_DELAY udelay(3) /* 1/4 I2C clock duration */ +#define I2C_SOFT_DECLARATIONS + +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_SPEED 100000 +#endif + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 + +#if defined(CONFIG_SYS_NO_FLASH) +#define CONFIG_KM_UBI_PARTITION_NAME "ubi0" +#undef CONFIG_FLASH_CFI_MTD +#undef CONFIG_JFFS2_CMDLINE +#endif + +#endif /* _CONFIG_KM_ARM_H */ |