diff options
Diffstat (limited to 'include/configs/km/km_arm.h')
| -rw-r--r-- | include/configs/km/km_arm.h | 266 |
1 files changed, 266 insertions, 0 deletions
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h new file mode 100644 index 0000000..add5624 --- /dev/null +++ b/include/configs/km/km_arm.h @@ -0,0 +1,266 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Prafulla Wadaskar <prafulla@marvell.com> + * + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2010-2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* + * for linking errors see + * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html + */ + +#ifndef _CONFIG_KM_ARM_H +#define _CONFIG_KM_ARM_H + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_MARVELL +#define CONFIG_ARM926EJS /* Basic Architecture */ +#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD /* SOC Family Name */ +#define CONFIG_KW88F6281 /* SOC Name */ +#define CONFIG_MACH_KM_KIRKWOOD /* Machine type */ + +/* include common defines/options for all Keymile boards */ +#include "keymile-common.h" + +#define CONFIG_SYS_TEXT_BASE 0x04000000 /* code address after reloc */ +#define CONFIG_ENV_SIZE (128 << 10) /* NAND chip block size */ +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ +#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ +#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ + +/* pseudo-non volatile RAM [hex] */ +#define CONFIG_KM_PNVRAM 0x80000 +/* physical RAM MTD size [hex] */ +#define CONFIG_KM_PHRAM 0x17F000 + +#define CONFIG_KM_CRAMFS_ADDR 0x2400000 +#define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 4096KBytes */ + +#define CONFIG_KM_DEF_ENV_CPU \ + "addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "boot=bootm ${actual_kernel_addr} - -\0" \ + "cramfsloadfdt=echo \\\\c\0" \ + "tftpfdt=echo \\\\c\0" \ + CONFIG_KM_DEF_ENV_UPDATE \ + "" + + + +#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ +#undef CONFIG_KIRKWOOD_PCIE_INIT /* Disable PCIE Port0 for kernel */ +#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ + +#define CONFIG_MISC_INIT_R + +/* + * NS16550 Configuration + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE + +/* + * Serial Port configuration + * The following definitions let you select what serial you want to use + * for your console driver. + */ + +#define CONFIG_CONS_INDEX 1 /* Console on UART0 */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ + +/* + * Commands configuration + */ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NFS + +/* + * Without NOR FLASH we need this + */ +#define CONFIG_SYS_NO_FLASH +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS + +/* + * NAND Flash configuration + */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_NAND_KIRKWOOD +#define CONFIG_SYS_NAND_BASE 0xd8000000 + +#define BOOTFLASH_START 0x0 + +#define CONFIG_KM_CONSOLE_TTY "ttyS0" + +/* size in bytes reserved for initial data */ + +/* + * Other required minimal configurations + */ +#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ +#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ +#define CONFIG_NR_DRAM_BANKS 4 +#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ + +/* + * Ethernet Driver configuration + */ +#define CONFIG_NETCONSOLE /* include NetConsole support */ +#define CONFIG_NET_MULTI /* specify more that one ports available */ +#define CONFIG_MII /* expose smi ove miiphy interface */ +#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */ +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ +#define CONFIG_PHY_BASE_ADR 0 +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ +#define CONFIG_RESET_PHY_R /* use reset_phy() to init 88E1118 PHY */ + +/* + * UBI related stuff + */ +#define CONFIG_SYS_USE_UBI + +/* + * I2C related stuff + */ +#define CONFIG_SOFT_I2C /* I2C bit-banged */ + +#define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */ +#if defined(CONFIG_SOFT_I2C) +#ifndef __ASSEMBLY__ +#include <asm/arch-kirkwood/gpio.h> +extern void __set_direction(unsigned pin, int high); +void set_sda(int state); +void set_scl(int state); +int get_sda(void); +int get_scl(void); +#define KM_KIRKWOOD_SDA_PIN 8 +#define KM_KIRKWOOD_SCL_PIN 9 +#define KM_KIRKWOOD_ENV_WP 38 + +#define I2C_ACTIVE __set_direction(KM_KIRKWOOD_SDA_PIN, 0) +#define I2C_TRISTATE __set_direction(KM_KIRKWOOD_SDA_PIN, 1) +#define I2C_READ (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0) +#define I2C_SDA(bit) kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit) +#define I2C_SCL(bit) kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit) +#endif + +#define I2C_DELAY udelay(3) /* 1/4 I2C clock duration */ +#define I2C_SOFT_DECLARATIONS + +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_SPEED 100000 +#endif + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 + +/* + * Environment variables configurations + */ +#define CONFIG_ENV_IS_IN_EEPROM /* use EEPROM for environment vars */ +#define CONFIG_SYS_DEF_EEPROM_ADDR 0x50 +#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define CONFIG_SYS_EEPROM_WREN +#define CONFIG_ENV_OFFSET 0x0 /* no bracets! */ +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET) +#define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0" + +/* offset redund: (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */ +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */ +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +#define CONFIG_CMD_SF + +#define CONFIG_SPI_FLASH +#define CONFIG_HARD_SPI +#define CONFIG_KIRKWOOD_SPI +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50Mhz */ + +#define FLASH_GPIO_PIN 0x00010000 + +#define MTDIDS_DEFAULT "nand0=orion_nand" +/* test-only: partitioning needs some tuning, this is just for tests */ +#define MTDPARTS_DEFAULT "mtdparts=" \ + "orion_nand:" \ + "-(" CONFIG_KM_UBI_PARTITION_NAME ")" + +#define CONFIG_KM_DEF_ENV_UPDATE \ + "update=" \ + "spi on;sf probe 0;sf erase 0 50000;" \ + "sf write ${u-boot_addr_r} 0 ${filesize};" \ + "spi off\0" + +#if defined(CONFIG_SYS_NO_FLASH) +#define CONFIG_KM_UBI_PARTITION_NAME "ubi0" +#undef CONFIG_FLASH_CFI_MTD +#undef CONFIG_JFFS2_CMDLINE +#endif + +/* additions for new relocation code, must be added to all boards */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +/* Kirkwood has 2k of Security SRAM, use it for SP */ +#define CONFIG_SYS_INIT_SP_ADDR 0xC8012000 +/* Do early setups now in board_init_f() */ +#define CONFIG_BOARD_EARLY_INIT_F + +/* + * resereved pram area at the end of memroy [hex] + * 8Mbytes for switch + 4Kbytes for bootcount + */ +#define CONFIG_KM_RESERVED_PRAM 0x801000 +/* address for the bootcount (taken from end of RAM) */ +#define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM) + +#endif /* _CONFIG_KM_ARM_H */ |