summaryrefslogtreecommitdiff
path: root/include/configs/keymile-common.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/keymile-common.h')
-rw-r--r--include/configs/keymile-common.h489
1 files changed, 332 insertions, 157 deletions
diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h
index e3bd264..cb6d0fb 100644
--- a/include/configs/keymile-common.h
+++ b/include/configs/keymile-common.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2008
+ * (C) Copyright 2008-2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -25,7 +25,8 @@
#define __CONFIG_KEYMILE_H
/* Do boardspecific init for all boards */
-#define CONFIG_BOARD_EARLY_INIT_R 1
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_LAST_STAGE_INIT
#define CONFIG_BOOTCOUNT_LIMIT
@@ -39,13 +40,6 @@
#endif /* CONFIG_SYS_KWD_CONFIG */
/*
- * CONFIG_SYS_TEXT_BASE can be defined in board specific header file, if needed
- */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE 0x00400000
-#endif /* CONFIG_SYS_TEXT_BASE */
-
-/*
* Command line configuration.
*/
#include <config_cmd_default.h>
@@ -56,51 +50,46 @@
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
-#define CONFIG_CMD_DTT
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_CMDLINE
#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_SETEXPR
-#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
+#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
-#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
-#define CONFIG_HUSH_INIT_VAR 1
+#define CONFIG_HUSH_INIT_VAR
#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ 1000 /* decr. freq: 1 ms ticks */
-#define CONFIG_BAUDRATE 115200
+#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+#define CONFIG_LOADS_ECHO
+#define CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_SYS_BOARD_DRAM_INIT /* Used board specific dram_init */
/*
@@ -108,28 +97,28 @@
* to modify in a centralized location. This is used in the HDLC
* driver to set the MAC.
*/
-#define CONFIG_CHECK_ETHERNET_PRESENT 1
-#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE
+#define CONFIG_CHECK_ETHERNET_PRESENT
+#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_KMBEC_FPGA_BASE
#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */
#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */
-#define CONFIG_I2C_MULTI_BUS 1
+#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_MAX_I2C_BUS 1
-#define CONFIG_SYS_I2C_INIT_BOARD 1
-#define CONFIG_I2C_MUX 1
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_I2C_MUX
/* EEprom support */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS 1
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
/* Support the IVM EEprom */
#define CONFIG_SYS_IVM_EEPROM_ADR 0x50
#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400
#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100
-#define CONFIG_SYS_FLASH_PROTECTION 1
+#define CONFIG_SYS_FLASH_PROTECTION
/*
* BOOTP options
@@ -139,139 +128,325 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_ENV_SIZE 0x04000 /* Size of Environment */
-
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
/* UBI Support for all Keymile boards */
#define CONFIG_CMD_UBI
#define CONFIG_RBTREE
#define CONFIG_MTD_PARTITIONS
-#define CONFIG_FLASH_CFI_MTD
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_CONCAT
-/* define this to use the keymile's io muxing feature */
-/*#define CONFIG_IO_MUXING */
-
-#ifdef CONFIG_IO_MUXING
-#define CONFIG_KM_DEF_ENV_IOMUX \
- "nc=setenv ethact HDLC \0" \
- "nce=setenv ethact SCC \0" \
- "stderr=serial,nc \0" \
- "stdin=serial,nc \0" \
- "stdout=serial,nc \0" \
- "tftpsrcp=69 \0" \
- "tftpdstp=69 \0"
-#else
-#define CONFIG_KM_DEF_ENV_IOMUX \
- "stderr=serial \0" \
- "stdin=serial \0" \
- "stdout=serial \0"
+/* common powerpc specific env settings */
+#ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS
+#define CONFIG_KM_DEF_ENV_BOOTPARAMS \
+ "bootparams=empty\0" \
+ "initial_boot_bank=0\0"
#endif
-#ifndef CONFIG_KM_DEF_ENV_PRIVATE
-#define CONFIG_KM_DEF_ENV_PRIVATE \
- "kmprivate=empty\0"
+#ifndef CONFIG_KM_DEF_NETDEV
+#define CONFIG_KM_DEF_NETDEV \
+ "netdev=eth0\0"
+#endif
+
+#ifndef CONFIG_KM_UBI_PARTITION_NAME
+#define CONFIG_KM_UBI_PARTITION_NAME "ubi0"
+#endif
+#ifndef CONFIG_KM_UBI_LINUX_MTD_NAME
+#define CONFIG_KM_UBI_LINUX_MTD_NAME "ubi0"
#endif
#define xstr(s) str(s)
#define str(s) #s
+/*
+ * bootrunner
+ * - run all commands in 'subbootcmds'
+ * - on error, stop running the remaing commands
+ */
+#define CONFIG_KM_DEF_ENV_BOOTRUNNER \
+ "bootrunner=" \
+ "break=0; " \
+ "for subbootcmd in ${subbootcmds}; do " \
+ "if test ${break} -eq 0; then; " \
+ "echo \"[INFO] running \\c\"; " \
+ "print ${subbootcmd}; " \
+ "run ${subbootcmd} || break=1; " \
+ "if test ${break} -eq 1; then; " \
+ "echo \"[ERR] failed \\c\"; " \
+ "print ${subbootcmd}; " \
+ "fi; " \
+ "fi; " \
+ "done\0" \
+ ""
+
+/*
+ * boottargets
+ * - set 'subbootcmds' for the bootrunner
+ * - set 'bootcmd' and 'altbootcmd'
+ * available targets:
+ * - 'release': for a standalone system kernel/rootfs from flash
+ * - 'develop': for development kernel(tftp)/rootfs(NFS)
+ * - 'ramfs': rootfilesystem in RAM kernel(tftp)/rootfs(RAM)
+ *
+ * - 'commonargs': bootargs common to all targets
+ */
+#define CONFIG_KM_DEF_ENV_BOOTTARGETS \
+ "commonargs=" \
+ "addip " \
+ "addtty " \
+ "addmem " \
+ "addinit " \
+ "addvar " \
+ "addmtdparts " \
+ "addbootcount " \
+ "\0" \
+ "develop=" \
+ "setenv subbootcmds \"" \
+ "tftpfdt tftpkernel " \
+ "nfsargs ${commonargs} " \
+ "printbootargs boot " \
+ "\" && " \
+ "setenv bootcmd \'" \
+ "run bootrunner" \
+ "\' && " \
+ "setenv altbootcmd \'" \
+ "run bootcmd" \
+ "\' && " \
+ "run setboardid && " \
+ "saveenv && " \
+ "reset\0" \
+ "ramfs=" \
+ "setenv actual_bank -1 && " \
+ "setenv subbootcmds \"" \
+ "tftpfdt tftpkernel " \
+ "setrootfsaddr tftpramfs " \
+ "flashargs ${commonargs} " \
+ "addpanic addramfs " \
+ "printbootargs boot " \
+ "\" && " \
+ "setenv bootcmd \'" \
+ "run bootrunner" \
+ "\' && " \
+ "setenv altbootcmd \'" \
+ "run bootcmd" \
+ "\' && " \
+ "run setboardid && " \
+ "run setramfspram && " \
+ "saveenv && " \
+ "reset\0" \
+ "release=" \
+ "setenv actual_bank ${initial_boot_bank} && " \
+ "setenv subbootcmds \"" \
+ "checkboardidlist " \
+ "checkboardid " \
+ "ubiattach ubicopy " \
+ "cramfsloadfdt cramfsloadkernel " \
+ "flashargs ${commonargs} " \
+ "addpanic " \
+ "printbootargs boot " \
+ "\" && " \
+ "setenv bootcmd \'" \
+ "run bootrunner; reset" \
+ "\' && " \
+ "setenv altbootcmd \'" \
+ "run actual0 bootcmd; reset" \
+ "\' && " \
+ "saveenv && " \
+ "reset\0" \
+ ""
+
+/*
+ * bootargs
+ * - modify 'bootargs'
+ *
+ * - 'addip': add ip configuration
+ * - 'addmem': limit kernel memory mem=
+ * - 'addpanic': add kernel panic options
+ * - 'addramfs': add phram device for the rootfilesysten in ram
+ * - 'addtty': add console=...
+ * - 'addvar': add phram device for /var
+ * - 'nfsargs': default arguments for nfs boot
+ * - 'flashargs': defaults arguments for flash base boot
+ *
+ * processor specific settings
+ * - 'addbootcount': add boot counter
+ * - 'addmtdparts': add mtd partition information
+ */
+#define CONFIG_KM_DEF_ENV_BOOTARGS \
+ "addinit=" \
+ "setenv bootargs ${bootargs} init=${init}\0" \
+ "addip=" \
+ "setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off\0" \
+ "addmem=" \
+ "setenv bootargs ${bootargs} mem=0x${pnvramaddr}\0" \
+ "addpanic=" \
+ "setenv bootargs ${bootargs} " \
+ "panic=1 panic_on_oops=1\0" \
+ "addramfs=" \
+ "setenv bootargs \"" \
+ "${bootargs} phram.phram=" \
+ "rootfs${actual_bank},${rootfsaddr},${rootfssize}\"\0" \
+ "addtty=" \
+ "setenv bootargs ${bootargs}" \
+ " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}\0" \
+ "addvar=" \
+ "setenv bootargs ${bootargs} phram.phram=phvar," \
+ "${varaddr},0x" xstr(CONFIG_KM_PHRAM) "\0" \
+ "nfsargs=" \
+ "setenv bootargs " \
+ "ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \
+ "root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "flashargs=" \
+ "setenv bootargs " \
+ "ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \
+ "root=mtdblock:rootfs${actual_bank} " \
+ "rootfstype=squashfs ro\0" \
+ ""
+
+/*
+ * compute_addr
+ * - compute addresses and sizes
+ * - addresses are calculated form the end of memory 'memsize'
+ *
+ * - 'setramfspram': compute PRAM size for ramfs target
+ * - 'setrootfsaddr': compute rootfilesystem address for phram
+ */
+#define CONFIG_KM_DEF_ENV_COMPUTE_ADDR \
+ "setboardid=" \
+ "if test \"x${boardId}\" = \"x\"; then; " \
+ "setenv boardId ${IVM_BoardId} && " \
+ "setenv hwKey ${IVM_HWKey}; " \
+ "else; " \
+ "echo \\\\c; " \
+ "fi\0" \
+ "setramfspram=" \
+ "setexpr value ${rootfssize} / 0x400 && " \
+ "setexpr value 0x${value} + ${pram} && " \
+ "setenv pram 0x${value}\0" \
+ "setrootfsaddr=" \
+ "setexpr value ${pnvramaddr} - ${rootfssize} && " \
+ "setenv rootfsaddr 0x${value}\0" \
+ ""
+
+/*
+ * flash_boot
+ * - commands for booting from flash
+ *
+ * - 'cramfsaddr': address to the cramfs (in ram)
+ * - 'cramfsloadkernel': copy kernel from a cramfs to ram
+ * - 'ubiattach': attach ubi partition
+ * - 'ubicopy': copy ubi volume to ram
+ * - volume names: bootfs0, bootfs1, bootfs2, ...
+ * - 'ubiparition': mtd parition name for ubi
+ *
+ * processor specific settings
+ * - 'cramfsloadfdt': copy fdt from a cramfs to ram
+ */
+#define CONFIG_KM_DEF_ENV_FLASH_BOOT \
+ "cramfsaddr="xstr(CONFIG_KM_CRAMFS_ADDR) "\0" \
+ "cramfsloadkernel=" \
+ "cramfsload ${kernel_addr_r} uImage && " \
+ "setenv actual_kernel_addr ${kernel_addr_r}\0" \
+ "ubiattach=ubi part ${ubipartition}\0" \
+ "ubicopy=ubi read ${cramfsaddr} bootfs${actual_bank}\0" \
+ "ubipartition=" CONFIG_KM_UBI_PARTITION_NAME "\0" \
+ ""
+
+/*
+ * net_boot
+ * - commands for booting over the network
+ *
+ * - 'tftpkernel': load a kernel with tftp into ram
+ * - 'tftpramfs': load rootfs with tftp into ram
+ *
+ * processor specific settings
+ * - 'tftpfdt': load fdt with tftp into ram
+ */
+#define CONFIG_KM_DEF_ENV_NET_BOOT \
+ "tftpkernel=" \
+ "tftpboot ${kernel_addr_r} ${kernel_file} && " \
+ "setenv actual_kernel_addr ${kernel_addr_r}\0" \
+ "tftpramfs=" \
+ "tftpboot ${rootfsaddr} \"\\\"${rootfsfile}\\\"\" && " \
+ "setenv loadaddr\0" \
+ ""
+
+/*
+ * constants
+ * - KM specific constants and commands
+ *
+ * - 'default': setup default environment
+ */
+#define CONFIG_KM_DEF_ENV_CONSTANTS \
+ "actual=setenv actual_bank ${initial_boot_bank}\0" \
+ "actual0=setenv actual_bank 0\0" \
+ "actual_bank=${initial_boot_bank}\0" \
+ "default=" \
+ "setenv default 'run newenv; reset' && " \
+ "run release && saveenv; reset\0" \
+ "checkboardidlist=" \
+ "if test \"x${boardIdListHex}\" != \"x\"; then " \
+ "IVMbidhwk=${IVM_BoardId}_${IVM_HWKey}; " \
+ "found=0; " \
+ "for bidhwk in \"${boardIdListHex}\"; do " \
+ "echo trying $bidhwk ...; " \
+ "if test \"x$bidhwk\" = \"x$IVMbidhwk\"; then " \
+ "found=1; " \
+ "echo match found for $bidhwk; " \
+ "if test \"x$bidhwk\" != \"x${boardId}_${hwKey}\";then "\
+ "setenv boardid ${IVM_BoardId}; " \
+ "setenv boardId ${IVM_BoardId}; " \
+ "setenv hwkey ${IVM_HWKey}; " \
+ "setenv hwKey ${IVM_HWKey}; " \
+ "echo \"boardId set to ${boardId}\"; " \
+ "echo \"hwKey set to ${hwKey}\"; " \
+ "saveenv; " \
+ "fi; " \
+ "fi; " \
+ "done; " \
+ "else " \
+ "echo \"boardIdListHex not set, not checked\"; "\
+ "found=1; " \
+ "fi; " \
+ "test \"$found\" = 1 \0" \
+ "checkboardid=" \
+ "test \"x${boardId}\" = \"x${IVM_BoardId}\" && " \
+ "test \"x${hwKey}\" = \"x${IVM_HWKey}\"\0" \
+ "printbootargs=print bootargs\0" \
+ "rootfsfile="xstr(CONFIG_HOSTNAME) "/rootfsImage\0" \
+ ""
+
#ifndef CONFIG_KM_DEF_ENV
#define CONFIG_KM_DEF_ENV \
- "netdev=eth0\0" \
- "u-boot_addr_r=100000\0" \
- "kernel_addr_r=200000\0" \
- "fdt_addr_r=600000\0" \
- "ram_ws=800000 \0" \
- "script_ws=780000 \0" \
- "fdt_file=" xstr(CONFIG_HOSTNAME) "/" \
- xstr(CONFIG_HOSTNAME) ".dtb\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin \0" \
- "kernel_file=" xstr(CONFIG_HOSTNAME) "/uImage \0" \
- "load=tftp ${u-boot_addr_r} ${u-boot}\0" \
- "update=protect off " xstr(BOOTFLASH_START) " +${filesize};" \
- "erase " xstr(BOOTFLASH_START) " +${filesize};" \
- "cp.b ${u-boot_addr_r} " xstr(BOOTFLASH_START) \
- " ${filesize};" \
- "protect on " xstr(BOOTFLASH_START) " +${filesize}\0" \
- "load_fdt=tftp ${fdt_addr_r} ${fdt_file}; " \
- "setenv actual_fdt_addr ${fdt_addr_r} \0" \
- "load_kernel=tftp ${kernel_addr_r} ${kernel_file}; " \
- "setenv actual_kernel_addr ${kernel_addr_r} \0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "mtdargs=setenv bootargs root=${actual_rootfs} rw " \
- "rootfstype=jffs2 \0" \
- "altmtdargs=setenv bootargs root=${backup_rootfs} rw " \
- "rootfstype=jffs2 \0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addboardid=setenv bootargs ${bootargs} " \
- "hwKey=${IVM_HWKey} boardId=0x${IVM_BoardId} \0" \
- "addpram=setenv bootargs ${bootargs} " \
- "mem=${mem} pram=${pram}\0" \
- "pram=" xstr(CONFIG_PRAM) "k\0" \
- "net_nfs=tftp ${kernel_addr_r} ${kernel_file}; " \
- "tftp ${fdt_addr_r} ${fdt_file}; " \
- "run nfsargs addip addcon addboardid addpram;" \
- "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "net_self=tftp ${kernel_addr_r} ${kernel_file}; " \
- "tftp ${fdt_addr_r} ${fdt_file}; " \
- "tftp ${ramdisk_addr} ${ramdisk_file}; " \
- "run ramargs addip addboardid addpram; " \
- "bootm ${kernel_addr_r} ${ramdisk_addr} ${fdt_addr_r}\0"\
- "flash_nfs=run nfsargs addip addcon;" \
- "bootm ${kernel_addr} - ${fdt_addr}\0" \
- "flash_self=run ramargs addip addcon addboardid addpram;" \
- "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
- "bootcmd=run mtdargs addip addcon addboardid addpram; " \
- "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \0" \
- "altbootcmd=run altmtdargs addip addcon addboardid addpram; " \
- "bootm ${backup_kernel_addr} - ${backup_fdt_addr} \0" \
- "actual0=setenv actual_bank 0; setenv actual_kernel_addr " \
- "${bank0_kernel_addr}; " \
- "setenv actual_fdt_addr ${bank0_fdt_addr}; " \
- "setenv actual_rootfs ${bank0_rootfs} \0" \
- "actual1=setenv actual_bank 1; setenv actual_kernel_addr " \
- "${bank1_kernel_addr}; " \
- "setenv actual_fdt_addr ${bank1_fdt_addr}; " \
- "setenv actual_rootfs ${bank1_rootfs} \0" \
- "backup0=setenv backup_bank 0; setenv backup_kernel_addr " \
- "${bank0_kernel_addr}; " \
- "setenv backup_fdt_addr ${bank0_fdt_addr}; " \
- "setenv backup_rootfs ${bank0_rootfs} \0" \
- "backup1=setenv backup_bank 1; setenv backup_kernel_addr " \
- "${bank1_kernel_addr}; " \
- "setenv backup_fdt_addr ${bank1_fdt_addr}; " \
- "setenv backup_rootfs ${bank1_rootfs} \0" \
- "setbank0=run actual0 backup1 \0" \
- "setbank1=run actual1 backup0 \0" \
- "release=setenv bootcmd " \
- "\'run mtdargs addip addcon addboardid addpram;" \
- "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \
- "saveenv \0" \
- "develop=setenv bootcmd " \
- "\'run nfsargs addip addcon addboardid addpram;" \
- "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \
- "saveenv \0" \
- "developall=setenv bootcmd " \
- "\'run load_fdt load_kernel nfsargs " \
- "addip addcon addboardid addpram; " \
- "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \
- "saveenv \0" \
- "set_new_esw_script=setenv new_esw_script " \
- "new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0" \
- "new_esw=run set_new_esw_script; " \
- "tftp ${script_ws} ${new_esw_script}; " \
- "iminfo ${script_ws}; source ${script_ws} \0" \
- "bootlimit=0 \0" \
- CONFIG_KM_DEF_ENV_IOMUX \
- CONFIG_KM_DEF_ENV_PRIVATE \
+ CONFIG_KM_DEF_ENV_BOOTPARAMS \
+ CONFIG_KM_DEF_NETDEV \
+ CONFIG_KM_DEF_ENV_CPU \
+ CONFIG_KM_DEF_ENV_BOOTRUNNER \
+ CONFIG_KM_DEF_ENV_BOOTTARGETS \
+ CONFIG_KM_DEF_ENV_BOOTARGS \
+ CONFIG_KM_DEF_ENV_COMPUTE_ADDR \
+ CONFIG_KM_DEF_ENV_FLASH_BOOT \
+ CONFIG_KM_DEF_ENV_NET_BOOT \
+ CONFIG_KM_DEF_ENV_CONSTANTS \
+ "altbootcmd=run bootcmd\0" \
+ "bootcmd=run default\0" \
+ "bootlimit=2\0" \
+ "init=/sbin/init-overlay.sh\0" \
+ "kernel_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \
+ "kernel_file="xstr(CONFIG_HOSTNAME) "/uImage\0" \
+ "kernel_name=uImage\0" \
+ "load=tftpboot ${u-boot_addr_r} ${u-boot}\0" \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "stderr=serial\0" \
+ "stdin=serial\0" \
+ "stdout=serial\0" \
+ "u-boot="xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "u-boot_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \
""
#endif /* CONFIG_KM_DEF_ENV */
generated by cgit v1.1 at 2024-07-16 21:16:03 +0000