diff options
Diffstat (limited to 'include/configs/keymile-common.h')
-rw-r--r-- | include/configs/keymile-common.h | 456 |
1 files changed, 0 insertions, 456 deletions
diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h deleted file mode 100644 index e91f6c7..0000000 --- a/include/configs/keymile-common.h +++ /dev/null @@ -1,456 +0,0 @@ -/* - * (C) Copyright 2008-2011 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_KEYMILE_H -#define __CONFIG_KEYMILE_H - -/* Do boardspecific init for all boards */ -#define CONFIG_BOARD_EARLY_INIT_R -#define CONFIG_LAST_STAGE_INIT - -#define CONFIG_BOOTCOUNT_LIMIT - -/* - * By default kwbimage.cfg from board specific folder is used - * If for some board, different configuration file need to be used, - * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file - */ -#ifndef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg -#endif /* CONFIG_SYS_KWD_CONFIG */ - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_SETEXPR - -#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ - -#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE - -#define CONFIG_HUSH_INIT_VAR - -#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */ - -#define CONFIG_SYS_HZ 1000 /* decr. freq: 1 ms ticks */ - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_LOADS_ECHO -#define CONFIG_SYS_LOADS_BAUD_CHANGE -#define CONFIG_SYS_BOARD_DRAM_INIT /* Used board specific dram_init */ - -/* - * How to get access to the slot ID. Put this here to make it easy - * to modify in a centralized location. This is used in the HDLC - * driver to set the MAC. -*/ -#define CONFIG_CHECK_ETHERNET_PRESENT -#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_KMBEC_FPGA_BASE -#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ -#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ - -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_MAX_I2C_BUS 1 -#define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_I2C_MUX - -/* EEprom support */ -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* Support the IVM EEprom */ -#define CONFIG_SYS_IVM_EEPROM_ADR 0x50 -#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400 -#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100 - -#define CONFIG_SYS_FLASH_PROTECTION - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) - -/* UBI Support for all Keymile boards */ -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_CONCAT - -/* common powerpc specific env settings */ -#ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS -#define CONFIG_KM_DEF_ENV_BOOTPARAMS \ - "bootparams=empty\0" \ - "initial_boot_bank=0\0" -#endif - -#ifndef CONFIG_KM_DEF_NETDEV -#define CONFIG_KM_DEF_NETDEV \ - "netdev=eth0\0" -#endif - -#ifndef CONFIG_KM_UBI_PARTITION_NAME -#define CONFIG_KM_UBI_PARTITION_NAME "ubi0" -#endif -#ifndef CONFIG_KM_UBI_LINUX_MTD_NAME -#define CONFIG_KM_UBI_LINUX_MTD_NAME "ubi0" -#endif - -#define xstr(s) str(s) -#define str(s) #s - -/* - * bootrunner - * - run all commands in 'subbootcmds' - * - on error, stop running the remaing commands - */ -#define CONFIG_KM_DEF_ENV_BOOTRUNNER \ - "bootrunner=" \ - "break=0; " \ - "for subbootcmd in ${subbootcmds}; do " \ - "if test ${break} -eq 0; then; " \ - "echo \"[INFO] running \\c\"; " \ - "print ${subbootcmd}; " \ - "run ${subbootcmd} || break=1; " \ - "if test ${break} -eq 1; then; " \ - "echo \"[ERR] failed \\c\"; " \ - "print ${subbootcmd}; " \ - "fi; " \ - "fi; " \ - "done\0" \ - "" - -/* - * boottargets - * - set 'subbootcmds' for the bootrunner - * - set 'bootcmd' and 'altbootcmd' - * available targets: - * - 'release': for a standalone system kernel/rootfs from flash - * - 'develop': for development kernel(tftp)/rootfs(NFS) - * - 'ramfs': rootfilesystem in RAM kernel(tftp)/rootfs(RAM) - * - * - 'commonargs': bootargs common to all targets - */ -#define CONFIG_KM_DEF_ENV_BOOTTARGETS \ - "commonargs=" \ - "addip " \ - "addtty " \ - "addmem " \ - "addinit " \ - "addvar " \ - "addmtdparts " \ - "addbootcount " \ - "\0" \ - "develop=" \ - "setenv subbootcmds \"" \ - "tftpfdt tftpkernel " \ - "nfsargs ${commonargs} " \ - "printbootargs boot " \ - "\" && " \ - "setenv bootcmd \'" \ - "run bootrunner" \ - "\' && " \ - "setenv altbootcmd \'" \ - "run bootcmd" \ - "\' && " \ - "run setboardid && " \ - "saveenv && " \ - "reset\0" \ - "ramfs=" \ - "setenv actual_bank -1 && " \ - "setenv subbootcmds \"" \ - "tftpfdt tftpkernel " \ - "setrootfsaddr tftpramfs " \ - "flashargs ${commonargs} " \ - "addpanic addramfs " \ - "printbootargs boot " \ - "\" && " \ - "setenv bootcmd \'" \ - "run bootrunner" \ - "\' && " \ - "setenv altbootcmd \'" \ - "run bootcmd" \ - "\' && " \ - "run setboardid && " \ - "run setramfspram && " \ - "saveenv && " \ - "reset\0" \ - "release=" \ - "setenv actual_bank ${initial_boot_bank} && " \ - "setenv subbootcmds \"" \ - "checkboardidlist " \ - "checkboardid " \ - "ubiattach ubicopy " \ - "cramfsloadfdt cramfsloadkernel " \ - "flashargs ${commonargs} " \ - "addpanic " \ - "printbootargs boot " \ - "\" && " \ - "setenv bootcmd \'" \ - "run actual bootrunner; reset" \ - "\' && " \ - "setenv altbootcmd \'" \ - "run backup bootrunner; reset" \ - "\' && " \ - "saveenv && " \ - "reset\0" \ - "" - -/* - * bootargs - * - modify 'bootargs' - * - * - 'addip': add ip configuration - * - 'addmem': limit kernel memory mem= - * - 'addpanic': add kernel panic options - * - 'addramfs': add phram device for the rootfilesysten in ram - * - 'addtty': add console=... - * - 'addvar': add phram device for /var - * - 'nfsargs': default arguments for nfs boot - * - 'flashargs': defaults arguments for flash base boot - * - * processor specific settings - * - 'addbootcount': add boot counter - * - 'addmtdparts': add mtd partition information - */ -#define CONFIG_KM_DEF_ENV_BOOTARGS \ - "addinit=" \ - "setenv bootargs ${bootargs} init=${init}\0" \ - "addip=" \ - "setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off\0" \ - "addmem=" \ - "setenv bootargs ${bootargs} mem=0x${pnvramaddr}\0" \ - "addpanic=" \ - "setenv bootargs ${bootargs} " \ - "panic=1 panic_on_oops=1\0" \ - "addramfs=" \ - "setenv bootargs \"" \ - "${bootargs} phram.phram=" \ - "rootfs${boot_bank},${rootfsaddr},${rootfssize}\"\0" \ - "addtty=" \ - "setenv bootargs ${bootargs}" \ - " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}\0" \ - "addvar=" \ - "setenv bootargs ${bootargs} phram.phram=phvar," \ - "${varaddr},0x" xstr(CONFIG_KM_PHRAM) "\0" \ - "nfsargs=" \ - "setenv bootargs " \ - "ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \ - "root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "flashargs=" \ - "setenv bootargs " \ - "ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \ - "root=mtdblock:rootfs${boot_bank} " \ - "rootfstype=squashfs ro\0" \ - "" - -/* - * compute_addr - * - compute addresses and sizes - * - addresses are calculated form the end of memory 'memsize' - * - * - 'setramfspram': compute PRAM size for ramfs target - * - 'setrootfsaddr': compute rootfilesystem address for phram - */ -#define CONFIG_KM_DEF_ENV_COMPUTE_ADDR \ - "setboardid=" \ - "if test \"x${boardId}\" = \"x\"; then; " \ - "setenv boardId ${IVM_BoardId} && " \ - "setenv hwKey ${IVM_HWKey}; " \ - "else; " \ - "echo \\\\c; " \ - "fi\0" \ - "setramfspram=" \ - "setexpr value ${rootfssize} / 0x400 && " \ - "setexpr value 0x${value} + ${pram} && " \ - "setenv pram 0x${value}\0" \ - "setrootfsaddr=" \ - "setexpr value ${pnvramaddr} - ${rootfssize} && " \ - "setenv rootfsaddr 0x${value}\0" \ - "" - -/* - * flash_boot - * - commands for booting from flash - * - * - 'cramfsaddr': address to the cramfs (in ram) - * - 'cramfsloadkernel': copy kernel from a cramfs to ram - * - 'ubiattach': attach ubi partition - * - 'ubicopy': copy ubi volume to ram - * - volume names: bootfs0, bootfs1, bootfs2, ... - * - 'ubiparition': mtd parition name for ubi - * - * processor specific settings - * - 'cramfsloadfdt': copy fdt from a cramfs to ram - */ -#define CONFIG_KM_DEF_ENV_FLASH_BOOT \ - "cramfsaddr="xstr(CONFIG_KM_CRAMFS_ADDR) "\0" \ - "cramfsloadkernel=" \ - "cramfsload ${kernel_addr_r} uImage && " \ - "setenv actual_kernel_addr ${kernel_addr_r}\0" \ - "ubiattach=ubi part ${ubipartition}\0" \ - "ubicopy=ubi read ${cramfsaddr} bootfs${boot_bank}\0" \ - "ubipartition=" CONFIG_KM_UBI_PARTITION_NAME "\0" \ - "" - -/* - * net_boot - * - commands for booting over the network - * - * - 'tftpkernel': load a kernel with tftp into ram - * - 'tftpramfs': load rootfs with tftp into ram - * - * processor specific settings - * - 'tftpfdt': load fdt with tftp into ram - */ -#define CONFIG_KM_DEF_ENV_NET_BOOT \ - "tftpkernel=" \ - "tftpboot ${kernel_addr_r} ${kernel_file} && " \ - "setenv actual_kernel_addr ${kernel_addr_r}\0" \ - "tftpramfs=" \ - "tftpboot ${rootfsaddr} \"\\\"${rootfsfile}\\\"\" && " \ - "setenv loadaddr\0" \ - "" - -/* - * constants - * - KM specific constants and commands - * - * - 'default': setup default environment - */ -#define CONFIG_KM_DEF_ENV_CONSTANTS \ - "actual=setenv boot_bank ${actual_bank}\0" \ - "backup=setenv boot_bank ${backup_bank}\0" \ - "actual_bank=${initial_boot_bank}\0" \ - "backup_bank=0\0" \ - "default=" \ - "setenv default 'run newenv; reset' && " \ - "run release && saveenv; reset\0" \ - "checkboardidlist=" \ - "if test \"x${boardIdListHex}\" != \"x\"; then " \ - "IVMbidhwk=${IVM_BoardId}_${IVM_HWKey}; " \ - "found=0; " \ - "for bidhwk in \"${boardIdListHex}\"; do " \ - "echo trying $bidhwk ...; " \ - "if test \"x$bidhwk\" = \"x$IVMbidhwk\"; then " \ - "found=1; " \ - "echo match found for $bidhwk; " \ - "if test \"x$bidhwk\" != \"x${boardId}_${hwKey}\";then "\ - "setenv boardid ${IVM_BoardId}; " \ - "setenv boardId ${IVM_BoardId}; " \ - "setenv hwkey ${IVM_HWKey}; " \ - "setenv hwKey ${IVM_HWKey}; " \ - "echo \"boardId set to ${boardId}\"; " \ - "echo \"hwKey set to ${hwKey}\"; " \ - "saveenv; " \ - "fi; " \ - "fi; " \ - "done; " \ - "else " \ - "echo \"boardIdListHex not set, not checked\"; "\ - "found=1; " \ - "fi; " \ - "test \"$found\" = 1 \0" \ - "checkboardid=" \ - "test \"x${boardId}\" = \"x${IVM_BoardId}\" && " \ - "test \"x${hwKey}\" = \"x${IVM_HWKey}\"\0" \ - "printbootargs=print bootargs\0" \ - "rootfsfile="xstr(CONFIG_HOSTNAME) "/rootfsImage\0" \ - "" - -#ifndef CONFIG_KM_DEF_ENV -#define CONFIG_KM_DEF_ENV \ - CONFIG_KM_DEF_ENV_BOOTPARAMS \ - CONFIG_KM_DEF_NETDEV \ - CONFIG_KM_DEF_ENV_CPU \ - CONFIG_KM_DEF_ENV_BOOTRUNNER \ - CONFIG_KM_DEF_ENV_BOOTTARGETS \ - CONFIG_KM_DEF_ENV_BOOTARGS \ - CONFIG_KM_DEF_ENV_COMPUTE_ADDR \ - CONFIG_KM_DEF_ENV_FLASH_BOOT \ - CONFIG_KM_DEF_ENV_NET_BOOT \ - CONFIG_KM_DEF_ENV_CONSTANTS \ - "altbootcmd=run bootcmd\0" \ - "bootcmd=run default\0" \ - "bootlimit=2\0" \ - "init=/sbin/init-overlay.sh\0" \ - "kernel_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \ - "kernel_file="xstr(CONFIG_HOSTNAME) "/uImage\0" \ - "kernel_name=uImage\0" \ - "load=tftpboot ${u-boot_addr_r} ${u-boot}\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "stderr=serial\0" \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "u-boot="xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ - "u-boot_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \ - "" -#endif /* CONFIG_KM_DEF_ENV */ - -#define CONFIG_VERSION_VARIABLE /* include version env variable */ - -#endif /* __CONFIG_KEYMILE_H */ |