diff options
Diffstat (limited to 'include/configs/integratorap.h')
| -rw-r--r-- | include/configs/integratorap.h | 243 |
1 files changed, 121 insertions, 122 deletions
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index 25f4682..ad92f32 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -38,15 +38,15 @@ #define CFG_MEMTEST_END 0x10000000 #define CFG_HZ 1000 #define CFG_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ -#define CFG_TIMERBASE 0x13000100 /* Timer1 */ +#define CFG_TIMERBASE 0x13000100 /* Timer1 */ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */ #undef CONFIG_INIT_CRITICAL -#define CONFIG_CM_INIT 1 -#define CONFIG_CM_REMAP 1 +#define CONFIG_CM_INIT 1 +#define CONFIG_CM_REMAP 1 #undef CONFIG_CM_SPD_DETECT /* @@ -60,36 +60,36 @@ */ #define CFG_PL010_SERIAL #define CONFIG_CONS_INDEX 0 -#define CONFIG_BAUDRATE 38400 +#define CONFIG_BAUDRATE 38400 #define CONFIG_PL01x_PORTS { (void *) (CFG_SERIAL0), (void *) (CFG_SERIAL1) } -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CFG_SERIAL0 0x16000000 #define CFG_SERIAL1 0x17000000 /*#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_PCI) */ /*#define CONFIG_NET_MULTI */ -/*#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */ +/*#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */ -#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) +#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> -#define CONFIG_BOOTDELAY 2 -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty" -#define CONFIG_BOOTCOMMAND "" +#define CONFIG_BOOTDELAY 2 +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty" +#define CONFIG_BOOTCOMMAND "" /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "Integrator-AP # " /* Monitor Command Prompt */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CFG_LOAD_ADDR 0x7fc0 /* default load address */ @@ -108,11 +108,11 @@ /*----------------------------------------------------------------------- * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ -#define CFG_FLASH_BASE 0x24000000 +#define CFG_FLASH_BASE 0x24000000 /*----------------------------------------------------------------------- * FLASH and environment organization @@ -123,8 +123,8 @@ /* timeout values are in ticks */ #define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ -#define CFG_MAX_FLASH_SECT 128 -#define CFG_ENV_SIZE 32768 +#define CFG_MAX_FLASH_SECT 128 +#define CFG_ENV_SIZE 32768 #define PHYS_FLASH_1 (CFG_FLASH_BASE) @@ -134,35 +134,35 @@ /*#define CONFIG_PCI /--* include pci support */ #undef CONFIG_PCI_PNP -#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ +#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ #define DEBUG #define CONFIG_EEPRO100 -#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define INTEGRATOR_BOOT_ROM_BASE 0x20000000 -#define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000 +#define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000 /* PCI Base area */ #define INTEGRATOR_PCI_BASE 0x40000000 #define INTEGRATOR_PCI_SIZE 0x3FFFFFFF /* memory map as seen by the CPU on the local bus */ -#define CPU_PCI_IO_ADRS 0x60000000 /* PCI I/O space base */ +#define CPU_PCI_IO_ADRS 0x60000000 /* PCI I/O space base */ #define CPU_PCI_IO_SIZE 0x10000 #define CPU_PCI_CNFG_ADRS 0x61000000 /* PCI config space */ #define CPU_PCI_CNFG_SIZE 0x1000000 -#define PCI_MEM_BASE 0x40000000 /* 512M to xxx */ +#define PCI_MEM_BASE 0x40000000 /* 512M to xxx */ /* unused 256M from A0000000-AFFFFFFF might be used for I2O ??? */ -#define INTEGRATOR_PCI_IO_BASE 0x60000000 /* 16M to xxx */ +#define INTEGRATOR_PCI_IO_BASE 0x60000000 /* 16M to xxx */ /* unused (128-16)M from B1000000-B7FFFFFF */ -#define PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */ +#define PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */ /* unused ((128-16)M - 64K) from XXX */ -#define PCI_V3_BASE 0x62000000 +#define PCI_V3_BASE 0x62000000 /* V3 PCI bridge controller */ #define V3_BASE 0x62000000 /* V360EPC registers */ @@ -171,97 +171,97 @@ #define PCI_ENET0_MEMADDR (PCI_MEM_BASE) -#define V3_PCI_VENDOR 0x00000000 -#define V3_PCI_DEVICE 0x00000002 -#define V3_PCI_CMD 0x00000004 -#define V3_PCI_STAT 0x00000006 -#define V3_PCI_CC_REV 0x00000008 -#define V3_PCI_HDR_CF 0x0000000C -#define V3_PCI_IO_BASE 0x00000010 -#define V3_PCI_BASE0 0x00000014 -#define V3_PCI_BASE1 0x00000018 -#define V3_PCI_SUB_VENDOR 0x0000002C -#define V3_PCI_SUB_ID 0x0000002E -#define V3_PCI_ROM 0x00000030 -#define V3_PCI_BPARAM 0x0000003C -#define V3_PCI_MAP0 0x00000040 -#define V3_PCI_MAP1 0x00000044 -#define V3_PCI_INT_STAT 0x00000048 -#define V3_PCI_INT_CFG 0x0000004C -#define V3_LB_BASE0 0x00000054 -#define V3_LB_BASE1 0x00000058 -#define V3_LB_MAP0 0x0000005E -#define V3_LB_MAP1 0x00000062 -#define V3_LB_BASE2 0x00000064 -#define V3_LB_MAP2 0x00000066 -#define V3_LB_SIZE 0x00000068 -#define V3_LB_IO_BASE 0x0000006E -#define V3_FIFO_CFG 0x00000070 -#define V3_FIFO_PRIORITY 0x00000072 -#define V3_FIFO_STAT 0x00000074 -#define V3_LB_ISTAT 0x00000076 -#define V3_LB_IMASK 0x00000077 -#define V3_SYSTEM 0x00000078 -#define V3_LB_CFG 0x0000007A -#define V3_PCI_CFG 0x0000007C -#define V3_DMA_PCI_ADR0 0x00000080 -#define V3_DMA_PCI_ADR1 0x00000090 -#define V3_DMA_LOCAL_ADR0 0x00000084 -#define V3_DMA_LOCAL_ADR1 0x00000094 -#define V3_DMA_LENGTH0 0x00000088 -#define V3_DMA_LENGTH1 0x00000098 -#define V3_DMA_CSR0 0x0000008B -#define V3_DMA_CSR1 0x0000009B -#define V3_DMA_CTLB_ADR0 0x0000008C -#define V3_DMA_CTLB_ADR1 0x0000009C -#define V3_DMA_DELAY 0x000000E0 -#define V3_MAIL_DATA 0x000000C0 -#define V3_PCI_MAIL_IEWR 0x000000D0 -#define V3_PCI_MAIL_IERD 0x000000D2 -#define V3_LB_MAIL_IEWR 0x000000D4 -#define V3_LB_MAIL_IERD 0x000000D6 -#define V3_MAIL_WR_STAT 0x000000D8 -#define V3_MAIL_RD_STAT 0x000000DA -#define V3_QBA_MAP 0x000000DC +#define V3_PCI_VENDOR 0x00000000 +#define V3_PCI_DEVICE 0x00000002 +#define V3_PCI_CMD 0x00000004 +#define V3_PCI_STAT 0x00000006 +#define V3_PCI_CC_REV 0x00000008 +#define V3_PCI_HDR_CF 0x0000000C +#define V3_PCI_IO_BASE 0x00000010 +#define V3_PCI_BASE0 0x00000014 +#define V3_PCI_BASE1 0x00000018 +#define V3_PCI_SUB_VENDOR 0x0000002C +#define V3_PCI_SUB_ID 0x0000002E +#define V3_PCI_ROM 0x00000030 +#define V3_PCI_BPARAM 0x0000003C +#define V3_PCI_MAP0 0x00000040 +#define V3_PCI_MAP1 0x00000044 +#define V3_PCI_INT_STAT 0x00000048 +#define V3_PCI_INT_CFG 0x0000004C +#define V3_LB_BASE0 0x00000054 +#define V3_LB_BASE1 0x00000058 +#define V3_LB_MAP0 0x0000005E +#define V3_LB_MAP1 0x00000062 +#define V3_LB_BASE2 0x00000064 +#define V3_LB_MAP2 0x00000066 +#define V3_LB_SIZE 0x00000068 +#define V3_LB_IO_BASE 0x0000006E +#define V3_FIFO_CFG 0x00000070 +#define V3_FIFO_PRIORITY 0x00000072 +#define V3_FIFO_STAT 0x00000074 +#define V3_LB_ISTAT 0x00000076 +#define V3_LB_IMASK 0x00000077 +#define V3_SYSTEM 0x00000078 +#define V3_LB_CFG 0x0000007A +#define V3_PCI_CFG 0x0000007C +#define V3_DMA_PCI_ADR0 0x00000080 +#define V3_DMA_PCI_ADR1 0x00000090 +#define V3_DMA_LOCAL_ADR0 0x00000084 +#define V3_DMA_LOCAL_ADR1 0x00000094 +#define V3_DMA_LENGTH0 0x00000088 +#define V3_DMA_LENGTH1 0x00000098 +#define V3_DMA_CSR0 0x0000008B +#define V3_DMA_CSR1 0x0000009B +#define V3_DMA_CTLB_ADR0 0x0000008C +#define V3_DMA_CTLB_ADR1 0x0000009C +#define V3_DMA_DELAY 0x000000E0 +#define V3_MAIL_DATA 0x000000C0 +#define V3_PCI_MAIL_IEWR 0x000000D0 +#define V3_PCI_MAIL_IERD 0x000000D2 +#define V3_LB_MAIL_IEWR 0x000000D4 +#define V3_LB_MAIL_IERD 0x000000D6 +#define V3_MAIL_WR_STAT 0x000000D8 +#define V3_MAIL_RD_STAT 0x000000DA +#define V3_QBA_MAP 0x000000DC /* SYSTEM register bits */ -#define V3_SYSTEM_M_RST_OUT (1 << 15) -#define V3_SYSTEM_M_LOCK (1 << 14) +#define V3_SYSTEM_M_RST_OUT (1 << 15) +#define V3_SYSTEM_M_LOCK (1 << 14) /* PCI_CFG bits */ -#define V3_PCI_CFG_M_RETRY_EN (1 << 10) -#define V3_PCI_CFG_M_AD_LOW1 (1 << 9) -#define V3_PCI_CFG_M_AD_LOW0 (1 << 8) +#define V3_PCI_CFG_M_RETRY_EN (1 << 10) +#define V3_PCI_CFG_M_AD_LOW1 (1 << 9) +#define V3_PCI_CFG_M_AD_LOW0 (1 << 8) /* PCI MAP register bits (PCI -> Local bus) */ -#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000 -#define V3_PCI_MAP_M_RD_POST_INH (1 << 15) -#define V3_PCI_MAP_M_ROM_SIZE (1 << 11 | 1 << 10) -#define V3_PCI_MAP_M_SWAP (1 << 9 | 1 << 8) -#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0 -#define V3_PCI_MAP_M_REG_EN (1 << 1) -#define V3_PCI_MAP_M_ENABLE (1 << 0) +#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000 +#define V3_PCI_MAP_M_RD_POST_INH (1 << 15) +#define V3_PCI_MAP_M_ROM_SIZE (1 << 11 | 1 << 10) +#define V3_PCI_MAP_M_SWAP (1 << 9 | 1 << 8) +#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0 +#define V3_PCI_MAP_M_REG_EN (1 << 1) +#define V3_PCI_MAP_M_ENABLE (1 << 0) /* 9 => 512M window size */ -#define V3_PCI_MAP_M_ADR_SIZE_512M 0x00000090 +#define V3_PCI_MAP_M_ADR_SIZE_512M 0x00000090 /* A => 1024M window size */ -#define V3_PCI_MAP_M_ADR_SIZE_1024M 0x000000A0 +#define V3_PCI_MAP_M_ADR_SIZE_1024M 0x000000A0 /* LB_BASE register bits (Local bus -> PCI) */ -#define V3_LB_BASE_M_MAP_ADR 0xFFF00000 -#define V3_LB_BASE_M_SWAP (1 << 8 | 1 << 9) -#define V3_LB_BASE_M_ADR_SIZE 0x000000F0 -#define V3_LB_BASE_M_PREFETCH (1 << 3) -#define V3_LB_BASE_M_ENABLE (1 << 0) +#define V3_LB_BASE_M_MAP_ADR 0xFFF00000 +#define V3_LB_BASE_M_SWAP (1 << 8 | 1 << 9) +#define V3_LB_BASE_M_ADR_SIZE 0x000000F0 +#define V3_LB_BASE_M_PREFETCH (1 << 3) +#define V3_LB_BASE_M_ENABLE (1 << 0) /* PCI COMMAND REGISTER bits */ -#define V3_COMMAND_M_FBB_EN (1 << 9) -#define V3_COMMAND_M_SERR_EN (1 << 8) -#define V3_COMMAND_M_PAR_EN (1 << 6) -#define V3_COMMAND_M_MASTER_EN (1 << 2) -#define V3_COMMAND_M_MEM_EN (1 << 1) -#define V3_COMMAND_M_IO_EN (1 << 0) +#define V3_COMMAND_M_FBB_EN (1 << 9) +#define V3_COMMAND_M_SERR_EN (1 << 8) +#define V3_COMMAND_M_PAR_EN (1 << 6) +#define V3_COMMAND_M_MASTER_EN (1 << 2) +#define V3_COMMAND_M_MEM_EN (1 << 1) +#define V3_COMMAND_M_IO_EN (1 << 0) #define INTEGRATOR_SC_BASE 0x11000000 #define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18 @@ -280,38 +280,37 @@ /* CM registers common to all integrator/CP CMs */ #define OS_CTRL 0x0000000C -#define CMMASK_REMAP 0x00000005 /* Set remap & led */ +#define CMMASK_REMAP 0x00000005 /* Set remap & led */ #define CMMASK_RESET 0x00000008 #define OS_LOCK 0x00000014 -#define CMVAL_LOCK 0x0000A000 /* Locking value */ -#define CMMASK_LOCK 0x0000005F /* Locking value */ +#define CMVAL_LOCK 0x0000A000 /* Locking value */ +#define CMMASK_LOCK 0x0000005F /* Locking value */ #define CMVAL_UNLOCK 0x00000000 /* Any value != CM_LOCKVAL */ #define OS_SDRAM 0x00000020 #define OS_INIT 0x00000024 #define CMMASK_MAP_SIMPLE 0xFFFDFFFF /* simple mapping */ #define CMMASK_TCRAM_DISABLE 0xFFFEFFFF /* TCRAM disabled */ -#define CMMASK_LOWVEC 0x00000004 /* vectors @ 0x00000000 */ +#define CMMASK_LOWVEC 0x00000004 /* vectors @ 0x00000000 */ #ifdef CONFIG_CM_SPD_DETECT #define OS_SPD 0x00000100 /* The SDRAM SPD data is copied here */ #endif #if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E) -#define CMMASK_INIT_102 0x00000300 /* see CM102xx ref manual - * - PLL test clock bypassed - * - bus clock ratio 2 - * - little endian - * - vectors at zero - */ +#define CMMASK_INIT_102 0x00000300 /* see CM102xx ref manual + * - PLL test clock bypassed + * - bus clock ratio 2 + * - little endian + * - vectors at zero + */ #endif /* CM1022xx */ -#define CMMASK_LE 0x00000008 /* little endian */ +#define CMMASK_LE 0x00000008 /* little endian */ #define CMMASK_CMxx6_COMMON 0x00000100 /* Common value for CMxx6 - * - divisor/ratio b00000001 - * bx - * - HCLKDIV b000 - * bxx - * - PLL BYPASS b00 - */ -#endif /* __CONFIG_H */ - + * - divisor/ratio b00000001 + * bx + * - HCLKDIV b000 + * bxx + * - PLL BYPASS b00 + */ +#endif /* __CONFIG_H */ |