summaryrefslogtreecommitdiff
path: root/include/configs/integratorap.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/integratorap.h')
-rw-r--r--include/configs/integratorap.h269
1 files changed, 269 insertions, 0 deletions
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
new file mode 100644
index 0000000..e6b5941
--- /dev/null
+++ b/include/configs/integratorap.h
@@ -0,0 +1,269 @@
+/*
+ * (C) Copyright 2003
+ * Texas Instruments.
+ * Kshitij Gupta <kshitij@ti.com>
+ * Configuation settings for the TI OMAP Innovator board.
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ * Configuration for Integrator AP board.
+ *.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */
+#define CONFIG_INTEGRATOR 1 /* in an Integrator board */
+#define CONFIG_ARCH_CINTEGRATOR 1 /* Specifically, a CP */
+
+
+#define CFG_MEMTEST_START 0x100000
+#define CFG_MEMTEST_END 0x10000000
+#define CFG_HZ (1000000 / 256) /* Timer 1 is clocked at 1Mhz, with 256 divider */
+#define CFG_TIMERBASE 0x13000100
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+
+/*
+ * PL010 Configuration
+ */
+#define CFG_PL010_SERIAL
+#define CONFIG_CONS_INDEX 0
+#define CONFIG_BAUDRATE 38400
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CFG_SERIAL0 0x16000000
+#define CFG_SERIAL1 0x17000000
+
+//#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_PCI)
+//#define CONFIG_NET_MULTI
+//#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
+
+#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY)
+
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY 2
+#define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty"
+#define CONFIG_BOOTCOMMAND ""
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "Integrator-AP # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+#define CFG_LOAD_ADDR 0x7fc0 /* default load address */
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
+
+#define CFG_FLASH_BASE 0x24000000
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_ENV_IS_NOWHERE
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */
+#define CFG_MAX_FLASH_SECT 128
+#define CFG_ENV_SIZE 32768
+
+#define PHYS_FLASH_1 (CFG_FLASH_BASE)
+
+/*-----------------------------------------------------------------------
+ * PCI definitions
+ */
+
+//#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
+#define DEBUG
+
+#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
+
+
+#define INTEGRATOR_BOOT_ROM_BASE 0x20000000
+#define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000
+
+// PCI Base area
+#define INTEGRATOR_PCI_BASE 0x40000000
+#define INTEGRATOR_PCI_SIZE 0x3FFFFFFF
+
+// memory map as seen by the CPU on the local bus
+#define CPU_PCI_IO_ADRS 0x60000000 // PCI I/O space base
+#define CPU_PCI_IO_SIZE 0x10000
+
+#define CPU_PCI_CNFG_ADRS 0x61000000 // PCI config space
+#define CPU_PCI_CNFG_SIZE 0x1000000
+
+#define PCI_MEM_BASE 0x40000000 // 512M to xxx
+// unused 256M from A0000000-AFFFFFFF might be used for I2O ???
+#define INTEGRATOR_PCI_IO_BASE 0x60000000 // 16M to xxx
+// unused (128-16)M from B1000000-B7FFFFFF
+#define PCI_CONFIG_BASE 0x61000000 // 16M to xxx
+// unused ((128-16)M - 64K) from XXX
+
+#define PCI_V3_BASE 0x62000000
+
+// V3 PCI bridge controller
+#define V3_BASE 0x62000000 // V360EPC registers
+
+#define PCI_ENET0_IOADDR (CPU_PCI_IO_ADRS)
+#define PCI_ENET0_MEMADDR (PCI_MEM_BASE)
+
+
+#define V3_PCI_VENDOR 0x00000000
+#define V3_PCI_DEVICE 0x00000002
+#define V3_PCI_CMD 0x00000004
+#define V3_PCI_STAT 0x00000006
+#define V3_PCI_CC_REV 0x00000008
+#define V3_PCI_HDR_CF 0x0000000C
+#define V3_PCI_IO_BASE 0x00000010
+#define V3_PCI_BASE0 0x00000014
+#define V3_PCI_BASE1 0x00000018
+#define V3_PCI_SUB_VENDOR 0x0000002C
+#define V3_PCI_SUB_ID 0x0000002E
+#define V3_PCI_ROM 0x00000030
+#define V3_PCI_BPARAM 0x0000003C
+#define V3_PCI_MAP0 0x00000040
+#define V3_PCI_MAP1 0x00000044
+#define V3_PCI_INT_STAT 0x00000048
+#define V3_PCI_INT_CFG 0x0000004C
+#define V3_LB_BASE0 0x00000054
+#define V3_LB_BASE1 0x00000058
+#define V3_LB_MAP0 0x0000005E
+#define V3_LB_MAP1 0x00000062
+#define V3_LB_BASE2 0x00000064
+#define V3_LB_MAP2 0x00000066
+#define V3_LB_SIZE 0x00000068
+#define V3_LB_IO_BASE 0x0000006E
+#define V3_FIFO_CFG 0x00000070
+#define V3_FIFO_PRIORITY 0x00000072
+#define V3_FIFO_STAT 0x00000074
+#define V3_LB_ISTAT 0x00000076
+#define V3_LB_IMASK 0x00000077
+#define V3_SYSTEM 0x00000078
+#define V3_LB_CFG 0x0000007A
+#define V3_PCI_CFG 0x0000007C
+#define V3_DMA_PCI_ADR0 0x00000080
+#define V3_DMA_PCI_ADR1 0x00000090
+#define V3_DMA_LOCAL_ADR0 0x00000084
+#define V3_DMA_LOCAL_ADR1 0x00000094
+#define V3_DMA_LENGTH0 0x00000088
+#define V3_DMA_LENGTH1 0x00000098
+#define V3_DMA_CSR0 0x0000008B
+#define V3_DMA_CSR1 0x0000009B
+#define V3_DMA_CTLB_ADR0 0x0000008C
+#define V3_DMA_CTLB_ADR1 0x0000009C
+#define V3_DMA_DELAY 0x000000E0
+#define V3_MAIL_DATA 0x000000C0
+#define V3_PCI_MAIL_IEWR 0x000000D0
+#define V3_PCI_MAIL_IERD 0x000000D2
+#define V3_LB_MAIL_IEWR 0x000000D4
+#define V3_LB_MAIL_IERD 0x000000D6
+#define V3_MAIL_WR_STAT 0x000000D8
+#define V3_MAIL_RD_STAT 0x000000DA
+#define V3_QBA_MAP 0x000000DC
+
+// SYSTEM register bits
+#define V3_SYSTEM_M_RST_OUT (1 << 15)
+#define V3_SYSTEM_M_LOCK (1 << 14)
+
+// PCI_CFG bits
+#define V3_PCI_CFG_M_RETRY_EN (1 << 10)
+#define V3_PCI_CFG_M_AD_LOW1 (1 << 9)
+#define V3_PCI_CFG_M_AD_LOW0 (1 << 8)
+
+// PCI MAP register bits (PCI -> Local bus)
+#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000
+#define V3_PCI_MAP_M_RD_POST_INH (1 << 15)
+#define V3_PCI_MAP_M_ROM_SIZE (1 << 11 | 1 << 10)
+#define V3_PCI_MAP_M_SWAP (1 << 9 | 1 << 8)
+#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0
+#define V3_PCI_MAP_M_REG_EN (1 << 1)
+#define V3_PCI_MAP_M_ENABLE (1 << 0)
+
+// 9 => 512M window size
+#define V3_PCI_MAP_M_ADR_SIZE_512M 0x00000090
+
+// A => 1024M window size
+#define V3_PCI_MAP_M_ADR_SIZE_1024M 0x000000A0
+
+// LB_BASE register bits (Local bus -> PCI)
+#define V3_LB_BASE_M_MAP_ADR 0xFFF00000
+#define V3_LB_BASE_M_SWAP (1 << 8 | 1 << 9)
+#define V3_LB_BASE_M_ADR_SIZE 0x000000F0
+#define V3_LB_BASE_M_PREFETCH (1 << 3)
+#define V3_LB_BASE_M_ENABLE (1 << 0)
+
+// PCI COMMAND REGISTER bits
+#define V3_COMMAND_M_FBB_EN (1 << 9)
+#define V3_COMMAND_M_SERR_EN (1 << 8)
+#define V3_COMMAND_M_PAR_EN (1 << 6)
+#define V3_COMMAND_M_MASTER_EN (1 << 2)
+#define V3_COMMAND_M_MEM_EN (1 << 1)
+#define V3_COMMAND_M_IO_EN (1 << 0)
+
+#define INTEGRATOR_SC_BASE 0x11000000
+#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18
+#define INTEGRATOR_SC_PCIENABLE \
+ (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
+
+
+#endif /* __CONFIG_H */