diff options
Diffstat (limited to 'include/configs/innokom.h')
| -rw-r--r-- | include/configs/innokom.h | 126 |
1 files changed, 63 insertions, 63 deletions
diff --git a/include/configs/innokom.h b/include/configs/innokom.h index 2b65052..1b05b80 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -102,54 +102,54 @@ /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (256*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (256*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "uboot> " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR 0xa3000000 /* load kernel to this address */ +#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* load kernel to this address */ -#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ /* RS: the oscillator is actually 3680130?? */ -#define CFG_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ +#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ /* 0101000001 */ /* ^^^^^ Memory Speed 99.53 MHz */ /* ^^ Run Mode Speed = 2x Mem Speed */ /* ^^ Turbo Mode Sp. = 1x Run M. Sp. */ -#define CFG_MONITOR_LEN 0x20000 /* 128 KiB */ +#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128 KiB */ /* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * I2C bus */ #define CONFIG_HARD_I2C 1 -#define CFG_I2C_SPEED 50000 -#define CFG_I2C_SLAVE 0xfe +#define CONFIG_SYS_I2C_SPEED 50000 +#define CONFIG_SYS_I2C_SLAVE 0xfe -#define CFG_ENV_IS_IN_EEPROM 1 +#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CFG_ENV_OFFSET 0x00 /* environment starts here */ -#define CFG_ENV_SIZE 1024 /* 1 KiB */ -#define CFG_I2C_EEPROM_ADDR 0x50 /* A0 = 0 (hardwired) */ -#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 15 /* between stop and start */ -#define CFG_I2C_EEPROM_ADDR_LEN 2 /* length of address */ -#define CFG_EEPROM_SIZE 4096 /* size in bytes */ -#define CFG_I2C_INIT_BOARD 1 /* board has it's own init */ +#define CONFIG_ENV_OFFSET 0x00 /* environment starts here */ +#define CONFIG_ENV_SIZE 1024 /* 1 KiB */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* A0 = 0 (hardwired) */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15 /* between stop and start */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* length of address */ +#define CONFIG_SYS_EEPROM_SIZE 4096 /* size in bytes */ +#define CONFIG_SYS_I2C_INIT_BOARD 1 /* board has it's own init */ /* * SMSC91C111 Network Card @@ -183,10 +183,10 @@ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ #define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ -#define CFG_DRAM_BASE 0xa0000000 /* RAM starts here */ -#define CFG_DRAM_SIZE 0x04000000 +#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* RAM starts here */ +#define CONFIG_SYS_DRAM_SIZE 0x04000000 -#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* * JFFS2 partitions @@ -242,9 +242,9 @@ * GP79 == nCS3 is 1 * GP80 == nCS4 is 1 */ -#define CFG_GPSR0_VAL 0x03008000 -#define CFG_GPSR1_VAL 0xC0028282 -#define CFG_GPSR2_VAL 0x0001C000 +#define CONFIG_SYS_GPSR0_VAL 0x03008000 +#define CONFIG_SYS_GPSR1_VAL 0xC0028282 +#define CONFIG_SYS_GPSR2_VAL 0x0001C000 /* GP02 == DON_RST is 0 * GP23 == SCLK is 0 @@ -253,9 +253,9 @@ * GP61 == LED_A is 0 * GP73 == SWUPD_LED is 0 */ -#define CFG_GPCR0_VAL 0x00800004 -#define CFG_GPCR1_VAL 0x30002000 -#define CFG_GPCR2_VAL 0x00000100 +#define CONFIG_SYS_GPCR0_VAL 0x00800004 +#define CONFIG_SYS_GPCR1_VAL 0x30002000 +#define CONFIG_SYS_GPCR2_VAL 0x00000100 /* GP00 == DON_READY is input * GP01 == DON_OK is input @@ -300,9 +300,9 @@ * GP79 == nCS3 is output * GP80 == nCS4 is output */ -#define CFG_GPDR0_VAL 0x03808004 -#define CFG_GPDR1_VAL 0xF002A282 -#define CFG_GPDR2_VAL 0x0001C200 +#define CONFIG_SYS_GPDR0_VAL 0x03808004 +#define CONFIG_SYS_GPDR1_VAL 0xF002A282 +#define CONFIG_SYS_GPDR2_VAL 0x0001C200 /* GP15 == nCS1 is AF10 * GP18 == RDY is AF01 @@ -322,12 +322,12 @@ * GP79 == nCS3 is AF10 * GP80 == nCS4 is AF10 */ -#define CFG_GAFR0_L_VAL 0x80000000 -#define CFG_GAFR0_U_VAL 0x001A8010 -#define CFG_GAFR1_L_VAL 0x60088058 -#define CFG_GAFR1_U_VAL 0x00000008 -#define CFG_GAFR2_L_VAL 0xA0000000 -#define CFG_GAFR2_U_VAL 0x00000002 +#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 +#define CONFIG_SYS_GAFR0_U_VAL 0x001A8010 +#define CONFIG_SYS_GAFR1_L_VAL 0x60088058 +#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 +#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 +#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 /* FIXME: set GPIO_RER/FER */ @@ -338,7 +338,7 @@ * BFS = 1 * SSS = 1 */ -#define CFG_PSSR_VAL 0x37 +#define CONFIG_SYS_PSSR_VAL 0x37 /* * Memory settings @@ -359,7 +359,7 @@ * [03] 1 - 16 Bit bus width * [02:00] 000 - nonburst RAM or FLASH */ -#define CFG_MSC0_VAL 0x25b825b8 /* flash banks */ +#define CONFIG_SYS_MSC0_VAL 0x25b825b8 /* flash banks */ /* This is the configuration for nCS2/3 -> TDM-Switch, DSP * configuration for nCS3: DSP @@ -377,7 +377,7 @@ * [03] 1 - 16 Bit bus width * [02:00] 100 - variable latency I/O */ -#define CFG_MSC1_VAL 0x123C593C /* TDM switch, DSP */ +#define CONFIG_SYS_MSC1_VAL 0x123C593C /* TDM switch, DSP */ /* This is the configuration for nCS4/5 -> ExtBus, LAN Controller * @@ -396,7 +396,7 @@ * [03] 1 - 16 Bit bus width * [02:00] 100 - variable latency I/O */ -#define CFG_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */ +#define CONFIG_SYS_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */ /* MDCNFG: SDRAM Configuration Register * @@ -424,7 +424,7 @@ * [00] 1 - enable SDRAM partition 0 */ /* use the configuration above but disable partition 0 */ -#define CFG_MDCNFG_VAL 0x000019c8 +#define CONFIG_SYS_MDCNFG_VAL 0x000019c8 /* MDREFR: SDRAM Refresh Control Register * @@ -445,7 +445,7 @@ * [12] 1 - E0PIN: disable SDCKE0 * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24 */ -#define CFG_MDREFR_VAL 0x0081D018 +#define CONFIG_SYS_MDREFR_VAL 0x0081D018 /* MDMRS: Mode Register Set Configuration Register * @@ -460,18 +460,18 @@ * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential. * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4. */ -#define CFG_MDMRS_VAL 0x00020022 +#define CONFIG_SYS_MDMRS_VAL 0x00020022 /* * PCMCIA and CF Interfaces */ -#define CFG_MECR_VAL 0x00000000 -#define CFG_MCMEM0_VAL 0x00000000 -#define CFG_MCMEM1_VAL 0x00000000 -#define CFG_MCATT0_VAL 0x00000000 -#define CFG_MCATT1_VAL 0x00000000 -#define CFG_MCIO0_VAL 0x00000000 -#define CFG_MCIO1_VAL 0x00000000 +#define CONFIG_SYS_MECR_VAL 0x00000000 +#define CONFIG_SYS_MCMEM0_VAL 0x00000000 +#define CONFIG_SYS_MCMEM1_VAL 0x00000000 +#define CONFIG_SYS_MCATT0_VAL 0x00000000 +#define CONFIG_SYS_MCATT1_VAL 0x00000000 +#define CONFIG_SYS_MCIO0_VAL 0x00000000 +#define CONFIG_SYS_MCIO1_VAL 0x00000000 /* #define CSB226_USER_LED0 0x00000008 @@ -482,11 +482,11 @@ /* * FLASH and environment organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 128 /* max number of sect. on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sect. on one chip */ /* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ #endif /* __CONFIG_H */ |