diff options
Diffstat (limited to 'include/configs/igep0046.h')
| -rw-r--r-- | include/configs/igep0046.h | 69 |
1 files changed, 67 insertions, 2 deletions
diff --git a/include/configs/igep0046.h b/include/configs/igep0046.h index 9154a6d..9d33b9f 100644 --- a/include/configs/igep0046.h +++ b/include/configs/igep0046.h @@ -1,7 +1,7 @@ /* * Copyright (C) 2016 ISEE 2007 SL - http://www.isee.biz * - * Configuration settings for the IGEP0046 board + * Header file for IGEP0046 board * * Author: Jose Miguel Sanchez Sanabria <jsanabria@iseebcn.com> * @@ -13,6 +13,9 @@ #include "mx6_common.h" +/* CPU */ +#define CONFIG_IMX_THERMAL + /* GPIO */ #define CONFIG_MXC_GPIO @@ -52,7 +55,7 @@ /* Miscellaneous configurable options */ #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "Press ESC to abort autoboot in %d seconds\n", bootdelay +#define CONFIG_AUTOBOOT_PROMPT "Press ESC to abort autoboot in 3 seconds\n" #define CONFIG_AUTOBOOT_STOP_STR "\x1b" #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " @@ -78,12 +81,74 @@ #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 /* MMC Configs */ +#define CONFIG_CMD_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_MMCROOT "/dev/mmcblk0p2" #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_DOS_PARTITION +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_FAT_WRITE + +/* EEPROM Configs */ +#define CONFIG_IGEP0046_CFG_EEPROM +#define CONFIG_SYS_I2C_IGEP0046_CFG_BUS_NUM 2 +#define CONFIG_SYS_I2C_IGEP0046_CFG_BUS_ADDR 0x50 + +/* NET Configs */ +#define CONFIG_ENV_OVERWRITE /* To allow write MAC into ethaddr variable */ +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 1 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MARVELL + +/* USB Configs */ +/* Host */ +#define CONFIG_USB +#define CONFIG_CMD_USB /* Enable USB Commands */ +#define CONFIG_USB_EHCI /* EHCI driver */ +#define CONFIG_USB_EHCI_MX6 /* iMX6 EHCI driver */ +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* OTG Core Init after Reset*/ +#define CONFIG_USB_HOST_ETHER /* USB Ethernet support */ +#define CONFIG_USB_ETHER_ASIX /* USB Ethernet support hardware adapter */ +#define CONFIG_USB_KEYBOARD /* USB Keyboard support */ +#define CONFIG_USB_STORAGE /* USB Storage support */ +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) /* MACRO non-ehci registers in the FSL SOC USB controller */ +#define CONFIG_MXC_USB_FLAGS 0 /* MXC Flag for ehci_hcd_init ?? */ +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number (core 0 + core 1) */ + +/* Device */ +#define CONFIG_CI_UDC /* USB ChipIdea Device driver */ +#define CONFIG_USBD_HS /* USB Device High speed support */ +#define CONFIG_USB_GADGET /* USB Device Gadget Layer support */ +#define CONFIG_USB_GADGET_DUALSPEED /* USB Device High speed support Ethernet */ +#define CONFIG_USB_FUNCTION_MASS_STORAGE /* USB Device Mass Storage support */ +#define CONFIG_CMD_USB_MASS_STORAGE /* USB CMD Mass Storage suppor */ +#define CONFIG_USB_GADGET_DOWNLOAD /* USB Download Gadget support */ +#define CONFIG_USB_GADGET_VBUS_DRAW 2 /* Maximum VBUS power usage (2-500 mA) */ +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 /* Vendor ID of USB Device */ +#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 /* Product ID of USB Device */ +#define CONFIG_G_DNL_MANUFACTURER "FSL" /* Manufacturer of USB Device */ + +/* Environment */ +#define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_ENV_IS_IN_MMC + + #endif /* __IGEP0046_CONFIG_H */ |