diff options
Diffstat (limited to 'include/configs/hikey.h')
-rw-r--r-- | include/configs/hikey.h | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/include/configs/hikey.h b/include/configs/hikey.h new file mode 100644 index 0000000..8ff9077 --- /dev/null +++ b/include/configs/hikey.h @@ -0,0 +1,159 @@ +/* + * (C) Copyright 2015 Linaro + * + * Peter Griffin <peter.griffin@linaro.org> + * + * Configuration for HiKey 96boards CE. Parts were derived from other ARM + * configurations. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __HIKEY_H +#define __HIKEY_H + +/* We use generic board for hikey */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_POWER +#define CONFIG_POWER_HI6553 + +#define CONFIG_REMAKE_ELF + +#define CONFIG_SUPPORT_RAW_INITRD + +/* Cache Definitions */ +#define CONFIG_SYS_DCACHE_OFF + +#define CONFIG_IDENT_STRING "hikey" + +/* Flat Device Tree Definitions */ +#define CONFIG_OF_LIBFDT + +/* Physical Memory Map */ + +/* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */ +#define CONFIG_SYS_TEXT_BASE 0x35000000 + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x00000000 + +/* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/ +#define PHYS_SDRAM_1_SIZE 0x3f000000 +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) + +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY 19000000 + +/* Generic Interrupt Controller Definitions */ +#define GICD_BASE 0xf6801000 +#define GICC_BASE 0xf6802000 + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20)) + +/* PL011 Serial Configuration */ +#define CONFIG_PL011_SERIAL + +#define CONFIG_PL011_CLOCK 19200000 +#define CONFIG_PL01x_PORTS {(void *)0xF8015000} +#define CONFIG_CONS_INDEX 0 + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_CMD_USB +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_DWC2 +#define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000 +/*#define CONFIG_DWC2_DFLT_SPEED_FULL*/ +#define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO + +#define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_MISC_INIT_R +#endif + +#define CONFIG_HIKEY_GPIO +#define CONFIG_DM_GPIO +#define CONFIG_CMD_GPIO +#define CONFIG_DM + +/* SD/MMC configuration */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_DWMMC +#define CONFIG_HIKEY_DWMMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_CMD_MMC + +#define CONFIG_FS_EXT4 + +/* Command line configuration */ +#define CONFIG_MENU +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_UNZIP +#define CONFIG_CMD_ENV + +#define CONFIG_MTD_PARTITIONS + +/* BOOTP options */ +#define CONFIG_BOOTP_BOOTFILESIZE + +#include <config_distro_defaults.h> + +/* Initial environment variables */ + +/* + * Defines where the kernel and FDT will be put in RAM + */ + +/* Assume we boot with root on the seventh partition of eMMC */ +#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw" + +#define BOOT_TARGET_DEVICES(func) \ + func(USB, usb, 0) \ + func(MMC, mmc, 1) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel_name=Image\0" \ + "kernel_addr_r=0x00080000\0" \ + "fdt_name=hi6220-hikey.dtb\0" \ + "fdt_addr_r=0x02000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + BOOTENV + + +/* Preserve enviroment on sd card */ +#define CONFIG_COMMAND_HISTORY + +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE_AND_PART "1:1" +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_FAT_WRITE +#define CONFIG_ENV_VARS_UBOOT_CONFIG + +/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_MAXARGS 64 /* max command args */ + +#define CONFIG_SYS_NO_FLASH + +#endif /* __HIKEY_H */ |