diff options
Diffstat (limited to 'include/configs/gr_cpci_ax2000.h')
| -rw-r--r-- | include/configs/gr_cpci_ax2000.h | 154 |
1 files changed, 77 insertions, 77 deletions
diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h index 942609f..bbe635b 100644 --- a/include/configs/gr_cpci_ax2000.h +++ b/include/configs/gr_cpci_ax2000.h @@ -61,13 +61,13 @@ #define CONFIG_SYS_CLK_FREQ 20000000 /* 20MHz */ /* Number of SPARC register windows */ -#define CFG_SPARC_NWINDOWS 8 +#define CONFIG_SYS_SPARC_NWINDOWS 8 /* * Serial console configuration */ #define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } /* Partitions */ #define CONFIG_DOS_PARTITION @@ -192,38 +192,38 @@ * 0xFF000000 for 16 MB * 0xFF800000 for 8 MB */ -/*#define CFG_NO_FLASH 1*/ -#define CFG_FLASH_BASE 0x00000000 -#define CFG_FLASH_SIZE 0x00800000 +/*#define CONFIG_SYS_NO_FLASH 1*/ +#define CONFIG_SYS_FLASH_BASE 0x00000000 +#define CONFIG_SYS_FLASH_SIZE 0x00800000 #define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors */ -#define CFG_MAX_FLASH_SECT 64 /* max num of sects on one chip */ -#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ -#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ +#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ +#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ /*** CFI CONFIG ***/ -#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT #define CONFIG_FLASH_CFI_DRIVER -#define CFG_FLASH_CFI +#define CONFIG_SYS_FLASH_CFI /* Bypass cache when reading regs from flash memory */ -#define CFG_FLASH_CFI_BYPASS_READ +#define CONFIG_SYS_FLASH_CFI_BYPASS_READ /* Buffered writes (32byte/go) instead of single accesses */ -#define CFG_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* * Environment settings */ -/*#define CFG_ENV_IS_NOWHERE 1*/ -#define CFG_ENV_IS_IN_FLASH 1 -/* CFG_ENV_ADDR need to be at sector boundary */ -#define CFG_ENV_SIZE 0x8000 -#define CFG_ENV_SECT_SIZE 0x20000 -#define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_FLASH_SIZE-CFG_ENV_SECT_SIZE) +/*#define CONFIG_ENV_IS_NOWHERE 1*/ +#define CONFIG_ENV_IS_IN_FLASH 1 +/* CONFIG_ENV_ADDR need to be at sector boundary */ +#define CONFIG_ENV_SIZE 0x8000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_OVERWRITE 1 /* @@ -235,59 +235,59 @@ */ #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM -#define CFG_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_SDRAM_BASE 0x40000000 #else -#define CFG_SDRAM_BASE 0x60000000 +#define CONFIG_SYS_SDRAM_BASE 0x60000000 #endif -#define CFG_SDRAM_SIZE 0x08000000 -#define CFG_SDRAM_END (CFG_SDRAM_BASE+CFG_SDRAM_SIZE) +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 +#define CONFIG_SYS_SDRAM_END (CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE) /* 4Mb SRAM available */ #if CONFIG_LEON_RAM_SELECT != CONFIG_LEON_RAM_SDRAM_NOSRAM -#define CFG_SRAM_BASE 0x40000000 -#define CFG_SRAM_SIZE 0x400000 -#define CFG_SRAM_END (CFG_SRAM_BASE+CFG_SRAM_SIZE) +#define CONFIG_SYS_SRAM_BASE 0x40000000 +#define CONFIG_SYS_SRAM_SIZE 0x400000 +#define CONFIG_SYS_SRAM_END (CONFIG_SYS_SRAM_BASE+CONFIG_SYS_SRAM_SIZE) #endif /* Select RAM used to run U-BOOT from... */ #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SRAM -#define CFG_RAM_BASE CFG_SRAM_BASE -#define CFG_RAM_SIZE CFG_SRAM_SIZE -#define CFG_RAM_END CFG_SRAM_END +#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SRAM_BASE +#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SRAM_SIZE +#define CONFIG_SYS_RAM_END CONFIG_SYS_SRAM_END #else -#define CFG_RAM_BASE CFG_SDRAM_BASE -#define CFG_RAM_SIZE CFG_SDRAM_SIZE -#define CFG_RAM_END CFG_SDRAM_END +#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE +#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END #endif -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_RAM_END - CFG_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) -#define CFG_PROM_SIZE (8192-CFG_GBL_DATA_SIZE) -#define CFG_PROM_OFFSET (CFG_GBL_DATA_OFFSET-CFG_PROM_SIZE) +#define CONFIG_SYS_PROM_SIZE (8192-CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_PROM_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE) -#define CFG_INIT_SP_OFFSET (CFG_PROM_OFFSET-32) -#define CFG_STACK_SIZE (0x10000-32) +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32) +#define CONFIG_SYS_STACK_SIZE (0x10000-32) -#define CFG_MONITOR_BASE TEXT_BASE -#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) -# define CFG_RAMBOOT 1 +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +# define CONFIG_SYS_RAMBOOT 1 #endif -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -#define CFG_MALLOC_END (CFG_INIT_SP_OFFSET-CFG_STACK_SIZE) -#define CFG_MALLOC_BASE (CFG_MALLOC_END-CFG_MALLOC_LEN) +#define CONFIG_SYS_MALLOC_END (CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE) +#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN) /* relocated monitor area */ -#define CFG_RELOC_MONITOR_MAX_END CFG_MALLOC_BASE -#define CFG_RELOC_MONITOR_BASE (CFG_RELOC_MONITOR_MAX_END-CFG_MONITOR_LEN) +#define CONFIG_SYS_RELOC_MONITOR_MAX_END CONFIG_SYS_MALLOC_BASE +#define CONFIG_SYS_RELOC_MONITOR_BASE (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN) /* make un relocated address from relocated address */ -#define UN_RELOC(address) (address-(CFG_RELOC_MONITOR_BASE-TEXT_BASE)) +#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE)) /* * Ethernet configuration uses on board SMC91C111 @@ -305,23 +305,23 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /* * Various low-level settings @@ -337,38 +337,38 @@ /***** Gaisler GRLIB IP-Cores Config ********/ /* AMBA Plug & Play info display on startup */ -/*#define CFG_AMBAPP_PRINT_ON_STARTUP*/ +/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/ -#define CFG_GRLIB_SDRAM 0 +#define CONFIG_SYS_GRLIB_SDRAM 0 /* See, GRLIB Docs (grip.pdf) on how to set up * These the memory controller registers. */ -#define CFG_GRLIB_MEMCFG1 (0x10f800ff | (1<<11)) +#define CONFIG_SYS_GRLIB_MEMCFG1 (0x10f800ff | (1<<11)) #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM -#define CFG_GRLIB_MEMCFG2 0x82206000 +#define CONFIG_SYS_GRLIB_MEMCFG2 0x82206000 #else -#define CFG_GRLIB_MEMCFG2 0x82205260 +#define CONFIG_SYS_GRLIB_MEMCFG2 0x82205260 #endif -#define CFG_GRLIB_MEMCFG3 0x0809a000 +#define CONFIG_SYS_GRLIB_MEMCFG3 0x0809a000 -#define CFG_GRLIB_FT_MEMCFG1 (0x10f800ff | (1<<11)) +#define CONFIG_SYS_GRLIB_FT_MEMCFG1 (0x10f800ff | (1<<11)) #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM -#define CFG_GRLIB_FT_MEMCFG2 0x82206000 +#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x82206000 #else -#define CFG_GRLIB_FT_MEMCFG2 0x82205260 +#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x82205260 #endif -#define CFG_GRLIB_FT_MEMCFG3 0x0809a000 +#define CONFIG_SYS_GRLIB_FT_MEMCFG3 0x0809a000 /* no DDR controller */ -#define CFG_GRLIB_DDR_CFG 0x00000000 +#define CONFIG_SYS_GRLIB_DDR_CFG 0x00000000 /* no DDR2 Controller */ -#define CFG_GRLIB_DDR2_CFG1 0x00000000 -#define CFG_GRLIB_DDR2_CFG3 0x00000000 +#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000 +#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000 /* Calculate scaler register value from default baudrate */ -#define CFG_GRLIB_APBUART_SCALER \ +#define CONFIG_SYS_GRLIB_APBUART_SCALER \ ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10) /* Identification string */ |