diff options
Diffstat (limited to 'include/configs/evb4510.h')
| -rw-r--r-- | include/configs/evb4510.h | 164 |
1 files changed, 164 insertions, 0 deletions
diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h new file mode 100644 index 0000000..4e14bf1 --- /dev/null +++ b/include/configs/evb4510.h @@ -0,0 +1,164 @@ +/* + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * Configuation settings for evb4510 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start u-boot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + * + * Also swap the flash1 and flash2 addresses during debug. + * + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM7 1 /* This is a ARM7 CPU */ +#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */ +#define CONFIG_S3C4510B 1 /* it's a S3C4510B chip */ +#define CONFIG_EVB4510 1 /* on an EVB4510 Board */ + +#undef CONFIG_USE_IRQ /* don't need them anymore */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_S3C4510_ETH 1 +#define CONFIG_DRIVER_S3C4510_I2C 1 +#define CONFIG_DRIVER_S3C4510_UART 1 +#define CONFIG_DRIVER_S3C4510_FLASH 1 + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 2 /* we use Serial line 2, could also use 1 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 19200 + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_ETHADDR 00:40:95:36:35:33 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 10.0.0.11 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_CMDLINE_TAG /* submit bootargs to kernel */ + +/*#define CONFIG_BOOTDELAY 10*/ +/* args and cmd for uClinux-image @ 0x10020000, ramdisk-image @ 0x100a0000 */ +#define CONFIG_BOOTCOMMAND "bootm 0x10020000 0x100a0000" +#define CONFIG_BOOTARGS "console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd" + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "evb4510 # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00000000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00780000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x00000000 /* default load address */ + +#define CFG_HZ 50000000 /* decrementer freq: 50 MHz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below +*/ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map after relocation + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */ +#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */ + +#define PHYS_FLASH_1 0x01000000 /* Flash Bank #1 */ +#define PHYS_FLASH_1_SIZE 0x00200000 /* 2 MB (one chip, 8bit access) */ + +#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */ +#define PHYS_FLASH_2_SIZE 0x00080000 /* 512KB (one chip, 8bit access) */ + +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_FLASH_SIZE PHYS_FLASH_1_SIZE + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ +#define CFG_MAIN_SECT_SIZE 0x00010000 /* main size of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (4*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ + +/* environment settings */ +#define CFG_ENV_IS_IN_FLASH +#undef CFG_ENV_IS_NOWHERE + +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x20000) /* environment start address */ +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE 0x4000 /* max size for environment */ + +#endif /* __CONFIG_H */ |