diff options
Diffstat (limited to 'include/configs/ep82xxm.h')
| -rw-r--r-- | include/configs/ep82xxm.h | 395 |
1 files changed, 395 insertions, 0 deletions
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h new file mode 100644 index 0000000..a77ccef --- /dev/null +++ b/include/configs/ep82xxm.h @@ -0,0 +1,395 @@ +/* + * Copyright (C) 2006 Embedded Planet, LLC. + * + * U-Boot configuration for Embedded Planet EP82xxM boards. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MPC8260 +#define CPU_ID_STR "MPC8270" + +#define CONFIG_EP82XXM /* Embedded Planet EP82xxM H 1.0 board */ + /* 256MB SDRAM / 64MB FLASH */ + +#undef DEBUG + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ + +/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ +#define CONFIG_ENV_OVERWRITE + +/* + * Select serial console configuration + * + * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then + * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 + * for SCC). + */ +#define CONFIG_CONS_ON_SMC /* Console is on SMC */ +#undef CONFIG_CONS_ON_SCC /* It's not on SCC */ +#undef CONFIG_CONS_NONE /* It's not on external UART */ +#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */ + +#define CFG_BCSR 0xFA000000 + +/* + * Select ethernet configuration + * + * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, + * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for + * SCC, 1-3 for FCC) + * + * If CONFIG_ETHER_NONE is defined, then either the ethernet routines + * must be defined elsewhere (as for the console), or CFG_CMD_NET must + * be removed from CONFIG_COMMANDS to remove support for networking. + */ +#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ +#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ +#undef CONFIG_ETHER_NONE /* No external Ethernet */ + +#define CONFIG_NET_MULTI + +#define CONFIG_ETHER_ON_FCC2 +#define CONFIG_ETHER_ON_FCC3 + +#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK) +#define CFG_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK16) +#define CFG_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) +#define CFG_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) + +#define CFG_CPMFCR_RAMTYPE 0 +#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) + +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */ + +/* + * GPIO pins used for bit-banged MII communications + */ +#define MDIO_PORT 0 /* Not used - implemented in BCSR */ +#define MDIO_ACTIVE (*(vu_char *)(CFG_BCSR + 8) &= 0xFB) +#define MDIO_TRISTATE (*(vu_char *)(CFG_BCSR + 8) |= 0x04) +#define MDIO_READ (*(vu_char *)(CFG_BCSR + 8) & 1) + +#define MDIO(bit) if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x01; \ + else *(vu_char *)(CFG_BCSR + 8) &= 0xFE + +#define MDC(bit) if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x02; \ + else *(vu_char *)(CFG_BCSR + 8) &= 0xFD + +#define MIIDELAY udelay(1) + + +#ifndef CONFIG_8260_CLKIN +#define CONFIG_8260_CLKIN 66000000 /* in Hz */ +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */ + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_DHCP \ + | CFG_CMD_ECHO \ + | CFG_CMD_I2C \ + | CFG_CMD_IMMAP \ + | CFG_CMD_MII \ + | CFG_CMD_PING \ + | CFG_CMD_DATE \ + | CFG_CMD_DTT \ + | CFG_CMD_EEPROM \ + | CFG_CMD_PCI \ + | CFG_CMD_DIAG \ + ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_ETHADDR 00:10:EC:00:88:65 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:10:EC:80:88:65 +#define CONFIG_IPADDR 10.0.0.245 +#define CONFIG_HOSTNAME EP82xxM +#define CONFIG_SERVERIP 10.0.0.26 +#define CONFIG_GATEWAYIP 10.0.0.1 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CFG_ENV_IN_OWN_SECT 1 +#define CONFIG_AUTO_COMPLETE 1 +#define CONFIG_EXTRA_ENV_SETTINGS "ethprime=FCC3 ETHERNET" + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ +#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ +#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ +#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */ +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ +#endif + +#define CONFIG_BZIP2 /* include support for bzip2 compressed images */ +#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "ep82xxm=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +/* + * Define here the location of the environment variables (FLASH or EEPROM). + * Note: DENX encourages to use redundant environment in FLASH. + */ +#if 1 +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#else +#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ +#endif + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0xFC000000 +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ +#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector in flinfo */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#endif /* CFG_ENV_IS_IN_FLASH */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +/* EEPROM Configuration */ +#define CFG_EEPROM_SIZE 0x1000 +#define CFG_I2C_EEPROM_ADDR 0x54 +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +#ifdef CFG_ENV_IS_IN_EEPROM +#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */ +#define CFG_ENV_OFFSET 0x0 +#endif /* CFG_ENV_IS_IN_EEPROM */ + +/* RTC Configuration */ +#define CONFIG_RTC_M41T11 1 /* uses a M41T81 */ +#define CFG_I2C_RTC_ADDR 0x68 +#define CONFIG_M41T11_BASE_YEAR 1900 + +/* I2C SYSMON (LM75) */ +#define CONFIG_DTT_LM75 1 +#define CONFIG_DTT_SENSORS {0} +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_LOW_TEMP -30 +#define CFG_DTT_HYSTERESIS 3 + +/*----------------------------------------------------------------------- + * NVRAM Configuration + *----------------------------------------------------------------------- + */ +#define CFG_NVRAM_BASE_ADDR 0xFA080000 +#define CFG_NVRAM_SIZE (128*1024)-16 + + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_PCI_BOOTDELAY 0 + +/* PCI Memory map (if different from default map */ +#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */ +#define CFG_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ +#define CFG_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \ + PICMR_PREFETCH_EN) + +/* + * These are the windows that allow the CPU to access PCI address space. + * All three PCI master windows, which allow the CPU to access PCI + * prefetch, non prefetch, and IO space (see below), must all fit within + * these windows. + */ + +/* + * Master window that allows the CPU to access PCI Memory (prefetch). + * This window will be setup with the second set of Outbound ATU registers + * in the bridge. + */ + +#define CFG_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ +#define CFG_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ +#define CFG_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL +#define CFG_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ +#define CFG_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN) + +/* + * Master window that allows the CPU to access PCI Memory (non-prefetch). + * This window will be setup with the second set of Outbound ATU registers + * in the bridge. + */ + +#define CFG_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ +#define CFG_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ +#define CFG_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL +#define CFG_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ +#define CFG_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE) + +/* + * Master window that allows the CPU to access PCI IO space. + * This window will be setup with the first set of Outbound ATU registers + * in the bridge. + */ + +#define CFG_PCI_MSTR_IO_LOCAL 0xF6000000 /* Local base */ +#define CFG_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ +#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL +#define CFG_PCI_MSTR_IO_SIZE 0x02000000 /* 64MB */ +#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO) + + +/* PCIBR0 - for PCI IO*/ +#define CFG_PCI_MSTR0_LOCAL CFG_PCI_MSTR_IO_LOCAL /* Local base */ +#define CFG_PCIMSK0_MASK ~(CFG_PCI_MSTR_IO_SIZE - 1U) /* Size of window */ +/* PCIBR1 - prefetch and non-prefetch regions joined together */ +#define CFG_PCI_MSTR1_LOCAL CFG_PCI_MSTR_MEM_LOCAL +#define CFG_PCIMSK1_MASK ~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U) + + +#define CFG_DIRECT_FLASH_TFTP + +#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS +#define CFG_JFFS2_FIRST_SECTOR 0 +#define CFG_JFFS2_LAST_SECTOR 62 +#define CFG_JFFS2_SORT_FRAGMENTS +#define CFG_JFFS_CUSTOM_PART +#endif /* CFG_CMD_JFFS2 */ + +#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#define CONFIG_HARD_I2C 1 /* To enable I2C support */ +#define CFG_I2C_SPEED 100000 /* I2C speed */ +#define CFG_I2C_SLAVE 0x7F /* I2C slave address */ +#endif /* CFG_CMD_I2C */ + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#endif + +#define CFG_MONITOR_LEN (512 << 10) /* Reserve 256KB for Monitor */ + +#define CFG_DEFAULT_IMMR 0x00010000 +#define CFG_IMMR 0xF0000000 + +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2000 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + + +/* Hard reset configuration word */ +#define CFG_HRCW_MASTER 0 /*0x1C800641*/ /* Not used - provided by CPLD */ +/* No slaves */ +#define CFG_HRCW_SLAVE1 0 +#define CFG_HRCW_SLAVE2 0 +#define CFG_HRCW_SLAVE3 0 +#define CFG_HRCW_SLAVE4 0 +#define CFG_HRCW_SLAVE5 0 +#define CFG_HRCW_SLAVE6 0 +#define CFG_HRCW_SLAVE7 0 + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +#define CFG_HID0_INIT 0 +#define CFG_HID0_FINAL 0 + +#define CFG_HID2 0 + +#define CFG_SIUMCR 0x02610000 +#define CFG_SYPCR 0xFFFF0689 +#define CFG_BCR 0x8080E000 +#define CFG_SCCR 0x00000001 + +#define CFG_RMR 0 +#define CFG_TMCNTSC 0x000000C3 +#define CFG_PISCR 0x00000083 +#define CFG_RCCR 0 + +#define CFG_MPTPR 0x0A00 +#define CFG_PSDMR 0xC432246E +#define CFG_PSRT 0x32 + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_BR (CFG_SDRAM_BASE | 0x00000041) +#define CFG_SDRAM_OR 0xF0002900 + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00001801) +#define CFG_OR0_PRELIM 0xFC000882 +#define CFG_BR4_PRELIM (CFG_BCSR | 0x00001001) +#define CFG_OR4_PRELIM 0xFFF00050 + +#define CFG_RESET_ADDRESS 0xFFF00100 + +#endif /* __CONFIG_H */ |