diff options
Diffstat (limited to 'include/configs/davinci_dm6467Tevm.h')
-rw-r--r-- | include/configs/davinci_dm6467Tevm.h | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/include/configs/davinci_dm6467Tevm.h b/include/configs/davinci_dm6467Tevm.h new file mode 100644 index 0000000..c507045 --- /dev/null +++ b/include/configs/davinci_dm6467Tevm.h @@ -0,0 +1,161 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* Spectrum Digital TMS320DM6467T EVM board */ +#define DAVINCI_DM6467EVM +#define CONFIG_SYS_USE_NAND +#define CONFIG_SYS_NAND_SMALLPAGE + +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* SoC Configuration */ +#define CONFIG_ARM926EJS /* arm926ejs CPU */ + +/* Clock rates detection */ +#ifndef __ASSEMBLY__ +extern unsigned int davinci_arm_clk_get(void); +#endif + +#define CFG_REFCLK_FREQ 33000000 +/* Arm Clock frequency */ +#define CONFIG_SYS_CLK_FREQ davinci_arm_clk_get() +/* Timer Input clock freq */ +#define CONFIG_SYS_HZ_CLOCK (CONFIG_SYS_CLK_FREQ/2) +#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SOC_DM646X + +/* EEPROM definitions for EEPROM */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 + +/* Memory Info */ +#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE (256 << 20) /* DDR size 256MB */ + +/* Linux interfacing */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_SYS_BARGSIZE 1024 /* Bootarg Size */ +#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ + +/* Serial Driver info */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 4 +#define CONFIG_SYS_NS16550_COM1 0x01c20000 +#define CONFIG_SYS_NS16550_CLK 24000000 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* I2C Configuration */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CONFIG_SYS_I2C_SPEED 80000 +#define CONFIG_SYS_I2C_SLAVE 10 + +/* Network & Ethernet Configuration */ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_EMAC_MDIO_PHY_NUM 1 +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_CMD_NET + +/* Flash & Environment */ +#define CONFIG_SYS_NO_FLASH +#ifdef CONFIG_SYS_USE_NAND +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NAND_CS 2 +#undef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ +#define CONFIG_SYS_NAND_BASE_LIST {0x42000000, } +#define CONFIG_SYS_NAND_HW_ECC +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_ENV_OFFSET 0 +#else +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE (4 << 10) /* 4 KiB */ +#endif + +/* U-Boot general configuration */ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "DM6467 EVM > " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +#define CONFIG_BOOTCOMMAND "source 0x82080000; dhcp; bootm" +#define CONFIG_BOOTARGS \ + "mem=120M console=ttyS0,115200n8 " \ + "root=/dev/hda1 rw noinitrd ip=dhcp" + +/* U-Boot commands */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#ifdef CONFIG_SYS_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +#endif + +#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +#endif /* __CONFIG_H */ |