diff options
Diffstat (limited to 'include/configs/csb472.h')
| -rw-r--r-- | include/configs/csb472.h | 129 |
1 files changed, 65 insertions, 64 deletions
diff --git a/include/configs/csb472.h b/include/configs/csb472.h index d3e5ea8..2e30e69 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -104,7 +104,7 @@ * */ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /* * KGDB Configuration @@ -119,36 +119,36 @@ * Miscellaneous configurable options * */ -#undef CFG_HUSH_PARSER /* use "hush" command parser */ -#ifdef CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " /* hush shell secondary prompt */ +#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /* hush shell secondary prompt */ #endif -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CFG_CLKS_IN_HZ 1 /* everything, incl board info, in Hz */ -#define CFG_EXTBDINFO 1 /* To use extended board_info (bd_t) */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_CLKS_IN_HZ 1 /* everything, incl board info, in Hz */ +#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* * watchdog configuration @@ -160,11 +160,11 @@ * UART configuration * */ -#undef CFG_EXT_SERIAL_CLOCK /* use internal serial clock */ -#undef CFG_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ -#define CFG_BASE_BAUD 691200 +#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* use internal serial clock */ +#undef CONFIG_SYS_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */ +#define CONFIG_SYS_BASE_BAUD 691200 #define CONFIG_BAUDRATE 38400 /* Default baud rate */ -#define CFG_BAUDRATE_TABLE \ +#define CONFIG_SYS_BAUDRATE_TABLE \ { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 } /* @@ -172,13 +172,14 @@ * */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CFG_I2C_SPEED 100000 /* I2C speed */ -#define CFG_I2C_SLAVE 0x7F /* I2C slave address */ +#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */ +#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ /* * MII PHY configuration * */ +#define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_PHY_CMD_DELAY 40 /* PHY COMMAND delay */ @@ -208,14 +209,14 @@ #undef CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ #define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ -#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */ -#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ -#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#define CFG_PCI_PTM2LA 0x00000000 /* disabled */ -#define CFG_PCI_PTM2MS 0x00000000 /* disabled */ -#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */ +#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */ +#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */ +#define CONFIG_SYS_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ +#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ +#define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */ +#define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */ +#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ /* * IDE stuff @@ -229,64 +230,64 @@ * Environment configuration * */ -#define CFG_ENV_IS_IN_FLASH 1 /* environment is in FLASH */ -#undef CFG_ENV_IS_IN_NVRAM -#undef CFG_ENV_IS_IN_EEPROM +#define CONFIG_ENV_IS_IN_FLASH 1 /* environment is in FLASH */ +#undef CONFIG_ENV_IS_IN_NVRAM +#undef CONFIG_ENV_IS_IN_EEPROM /* * General Memory organization * * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0xFF800000 -#define CFG_FLASH_SIZE 0x00800000 -#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 KB for Monitor */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 KB for malloc() */ - -#if CFG_MONITOR_BASE < CFG_FLASH_BASE -#define CFG_RAMSTART +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_FLASH_BASE 0xFF800000 +#define CONFIG_SYS_FLASH_SIZE 0x00800000 +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 KB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 KB for malloc() */ + +#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_RAMSTART #endif -#if defined(CFG_ENV_IS_IN_FLASH) -#define CFG_ENV_IN_OWN_SECTOR 1 /* Give Environment own sector */ -#define CFG_ENV_ADDR 0xFFF00000 /* Address of Environment Sector */ -#define CFG_ENV_SIZE 0x00001000 /* Size of Environment */ -#define CFG_ENV_SECT_SIZE 0x00040000 /* Size of Environment Sector */ +#if defined(CONFIG_ENV_IS_IN_FLASH) +#define CONFIG_ENV_IN_OWN_SECTOR 1 /* Give Environment own sector */ +#define CONFIG_ENV_ADDR 0xFFF00000 /* Address of Environment Sector */ +#define CONFIG_ENV_SIZE 0x00001000 /* Size of Environment */ +#define CONFIG_ENV_SECT_SIZE 0x00040000 /* Size of Environment Sector */ #endif /* * FLASH Device configuration * */ -#define CFG_FLASH_CFI 1 /* flash is CFI conformant */ +#define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */ #define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_MAX_FLASH_BANKS 1 /* max # of memory banks */ -#define CFG_FLASH_INCREMENT 0 /* there is only one bank */ -#define CFG_MAX_FLASH_SECT 64 /* max # of sectors on one chip */ -#define CFG_FLASH_PROTECTION 1 /* hardware flash protection */ -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */ +#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */ +#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max # of sectors on one chip */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware flash protection */ +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } /* * On Chip Memory location/size * */ -#define CFG_OCM_DATA_ADDR 0xF8000000 -#define CFG_OCM_DATA_SIZE 0x1000 +#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 +#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 /* * Global info and initial stack * */ -#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of on-chip SRAM */ -#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ -#define CFG_GBL_DATA_SIZE 128 /* byte size reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */ +#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* byte size reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* * Miscellaneous board specific definitions |