diff options
Diffstat (limited to 'include/configs/cradle.h')
| -rw-r--r-- | include/configs/cradle.h | 354 |
1 files changed, 354 insertions, 0 deletions
diff --git a/include/configs/cradle.h b/include/configs/cradle.h new file mode 100644 index 0000000..f87f171 --- /dev/null +++ b/include/configs/cradle.h @@ -0,0 +1,354 @@ +/* + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ +#define CONFIG_HHP_CRADLE 1 /* on an Cradle Board */ + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * Size of malloc() pool + */ +#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024) + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE 0x10000300 +#define CONFIG_SMC91111_EXT_PHY +#define CONFIG_SMC_USE_32_BIT + +/* + * select serial console configuration + */ +#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "root=/dev/mtdblock2 console=ttyS0,115200" +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.0.0 +#define CONFIG_IPADDR 192.168.0.21 +#define CONFIG_SERVERIP 192.168.0.250 +#define CONFIG_BOOTCOMMAND "bootm 40000" +#define CONFIG_CMDLINE_TAG + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xa2000000 /* default load address */ + +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x01000000 /* 64 MB */ +#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0x04000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ + +#define CFG_DRAM_BASE 0xa0000000 +#define CFG_DRAM_SIZE 0x04000000 + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/* + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 32 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0x00020000 /* absolute address for now */ +#define CFG_ENV_SIZE 0x20000 /* 8K ouch, this may later be */ + +/****************************************************************************** + * + * CPU specific defines + * + ******************************************************************************/ + +/* + * GPIO settings + * + * GPIO pin assignments + * GPIO Name Dir Out AF + * 0 NC + * 1 NC + * 2 SIRQ1 I + * 3 SIRQ2 I + * 4 SIRQ3 I + * 5 DMAACK1 O 0 + * 6 DMAACK2 O 0 + * 7 DMAACK3 O 0 + * 8 TC1 O 0 + * 9 TC2 O 0 + * 10 TC3 O 0 + * 11 nDMAEN O 1 + * 12 AENCTRL O 0 + * 13 PLDTC O 0 + * 14 ETHIRQ I + * 15 NC + * 16 NC + * 17 NC + * 18 RDY I + * 19 DMASIO I + * 20 ETHIRQ NC + * 21 NC + * 22 PGMEN O 1 FIXME for debug only enable flash + * 23 NC + * 24 NC + * 25 NC + * 26 NC + * 27 NC + * 28 NC + * 29 NC + * 30 NC + * 31 NC + * 32 NC + * 33 NC + * 34 FFRXD I 01 + * 35 FFCTS I 01 + * 36 FFDCD I 01 + * 37 FFDSR I 01 + * 38 FFRI I 01 + * 39 FFTXD O 1 10 + * 40 FFDTR O 0 10 + * 41 FFRTS O 0 10 + * 42 RS232FOFF O 0 00 + * 43 NC + * 44 NC + * 45 IRSL0 O 0 + * 46 IRRX0 I 01 + * 47 IRTX0 O 0 10 + * 48 NC + * 49 nIOWE O 0 + * 50 NC + * 51 NC + * 52 NC + * 53 NC + * 54 NC + * 55 NC + * 56 NC + * 57 NC + * 58 DKDIRQ I + * 59 NC + * 60 NC + * 61 NC + * 62 NC + * 63 NC + * 64 COMLED O 0 + * 65 COMLED O 0 + * 66 COMLED O 0 + * 67 COMLED O 0 + * 68 COMLED O 0 + * 69 COMLED O 0 + * 70 COMLED O 0 + * 71 COMLED O 0 + * 72 NC + * 73 NC + * 74 NC + * 75 NC + * 76 NC + * 77 NC + * 78 CSIO O 1 + * 79 NC + * 80 CSETH O 1 + * + * NOTE: All NC's are defined to be outputs + * + */ +/* Pin direction control */ +/* NOTE GPIO 0, 61, 62 are set for inputs due to CPLD SPAREs */ +#define CFG_GPDR0_VAL 0xfff3bf02 +#define CFG_GPDR1_VAL 0xfbffbf83 +#define CFG_GPDR2_VAL 0x0001ffff +/* Set and Clear registers */ +#define CFG_GPSR0_VAL 0x00400800 +#define CFG_GPSR1_VAL 0x00000480 +#define CFG_GPSR2_VAL 0x00014000 +#define CFG_GPCR0_VAL 0x00000000 +#define CFG_GPCR1_VAL 0x00000000 +#define CFG_GPCR2_VAL 0x00000000 +/* Edge detect registers (these are set by the kernel) */ +#define CFG_GRER0_VAL 0x00000000 +#define CFG_GRER1_VAL 0x00000000 +#define CFG_GRER2_VAL 0x00000000 +#define CFG_GFER0_VAL 0x00000000 +#define CFG_GFER1_VAL 0x00000000 +#define CFG_GFER2_VAL 0x00000000 +/* Alternate function registers */ +#define CFG_GAFR0_L_VAL 0x00000000 +#define CFG_GAFR0_U_VAL 0x00000010 +#define CFG_GAFR1_L_VAL 0x900a9550 +#define CFG_GAFR1_U_VAL 0x00000008 +#define CFG_GAFR2_L_VAL 0x20000000 +#define CFG_GAFR2_U_VAL 0x00000002 + +/* + * Clocks, power control and interrupts + */ +#define CFG_PSSR_VAL 0x00000020 +#define CFG_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */ +#define CFG_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */ +#define CFG_ICMR_VAL 0x00000000 /* No interrupts enabled */ + +/* FIXME + * + * RTC settings + * Watchdog + * + */ + +/* + * Memory settings + * + * FIXME Can ethernet be burst read and/or write?? This is set for lubbock + * Verify timings on all + */ +#define CFG_MSC0_VAL 0x000023FA /* flash bank (cs0) */ +/*#define CFG_MSC1_VAL 0x00003549 / * SuperIO bank (cs2) */ +#define CFG_MSC1_VAL 0x0000354c /* SuperIO bank (cs2) */ +#define CFG_MSC2_VAL 0x00001224 /* Ethernet bank (cs4) */ +#ifdef REDBOOT_WAY +#define CFG_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */ +#define CFG_MDMRS_VAL 0x00000000 +#define CFG_MDREFR_VAL 0x00018018 +#else +#define CFG_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */ +#define CFG_MDMRS_VAL 0x00000000 +#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual bits set in memsetup.S */ +#endif + +/* + * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init) + */ +#define CFG_MECR_VAL 0x00000000 +#define CFG_MCMEM0_VAL 0x00010504 +#define CFG_MCMEM1_VAL 0x00010504 +#define CFG_MCATT0_VAL 0x00010504 +#define CFG_MCATT1_VAL 0x00010504 +#define CFG_MCIO0_VAL 0x00004715 +#define CFG_MCIO1_VAL 0x00004715 + +/* Board specific defines */ + +/* LED defines */ +#define YELLOW 0x03 +#define RED 0x02 +#define GREEN 0x01 +#define OFF 0x00 +#define LED_IRDA0 0 +#define LED_IRDA1 2 +#define LED_IRDA2 4 +#define LED_IRDA3 6 +#define CRADLE_LED_SET_REG GPSR2 +#define CRADLE_LED_CLR_REG GPCR2 + +/* SuperIO defines */ +#define CRADLE_SIO_INDEX 0x2e +#define CRADLE_SIO_DATA 0x2f + +/* IO defines */ +#define CRADLE_CPLD_PHYS 0x08000000 +#define CRADLE_SIO1_PHYS 0x08100000 +#define CRADLE_SIO2_PHYS 0x08200000 +#define CRADLE_SIO3_PHYS 0x08300000 +#define CRADLE_ETH_PHYS 0x10000000 + +#ifndef __ASSEMBLY__ + +/* global prototypes */ +void led_code(int code, int color); + +#endif + +#endif /* __CONFIG_H */ |