diff options
Diffstat (limited to 'include/configs/cogent_mpc8260.h')
| -rw-r--r-- | include/configs/cogent_mpc8260.h | 152 |
1 files changed, 76 insertions, 76 deletions
diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h index 84d50c7..c580230 100644 --- a/include/configs/cogent_mpc8260.h +++ b/include/configs/cogent_mpc8260.h @@ -136,25 +136,25 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x01c00000 /* 4 ... 28 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x01c00000 /* 4 ... 28 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } /* * Low Level Configuration Settings @@ -164,19 +164,19 @@ /*----------------------------------------------------------------------- * Low Level Cogent settings - * if CFG_CMA_CONS_SERIAL is defined, make sure the 8260 CPM serial is not. + * if CONFIG_SYS_CMA_CONS_SERIAL is defined, make sure the 8260 CPM serial is not. * also, make sure CONFIG_CONS_INDEX is still defined - the index will be * 1 for serialA, 2 for serialB, 3 for ser2A, 4 for ser2B * (second 2 for CMA120 only) */ -#define CFG_CMA_MB_BASE 0x00000000 /* base of m/b address space */ +#define CONFIG_SYS_CMA_MB_BASE 0x00000000 /* base of m/b address space */ #include <configs/cogent_common.h> #ifdef CONFIG_CONS_NONE -#define CFG_CMA_CONS_SERIAL /* use Cogent motherboard serial for console */ +#define CONFIG_SYS_CMA_CONS_SERIAL /* use Cogent motherboard serial for console */ #endif -#define CFG_CMA_LCD_HEARTBEAT /* define for sec rotator in lcd corner */ +#define CONFIG_SYS_CMA_LCD_HEARTBEAT /* define for sec rotator in lcd corner */ #define CONFIG_SHOW_ACTIVITY #if (CMA_MB_CAPS & CMA_MB_CAP_FLASH) @@ -197,81 +197,81 @@ /*----------------------------------------------------------------------- * Hard Reset Configuration Words * - * if you change bits in the HRCW, you must also change the CFG_* + * if you change bits in the HRCW, you must also change the CONFIG_SYS_* * defines for the various registers affected by the HRCW e.g. changing - * HRCW_DPPCxx requires you to also change CFG_SIUMCR. + * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR. */ -#define CFG_HRCW_MASTER (HRCW_EBM|HRCW_BPS10|HRCW_L2CPC10|HRCW_DPPC11|\ +#define CONFIG_SYS_HRCW_MASTER (HRCW_EBM|HRCW_BPS10|HRCW_L2CPC10|HRCW_DPPC11|\ HRCW_ISB100|HRCW_MMR11|HRCW_MODCK_H0101) /* no slaves so just duplicate the master hrcw */ -#define CFG_HRCW_SLAVE1 CFG_HRCW_MASTER -#define CFG_HRCW_SLAVE2 CFG_HRCW_MASTER -#define CFG_HRCW_SLAVE3 CFG_HRCW_MASTER -#define CFG_HRCW_SLAVE4 CFG_HRCW_MASTER -#define CFG_HRCW_SLAVE5 CFG_HRCW_MASTER -#define CFG_HRCW_SLAVE6 CFG_HRCW_MASTER -#define CFG_HRCW_SLAVE7 CFG_HRCW_MASTER +#define CONFIG_SYS_HRCW_SLAVE1 CONFIG_SYS_HRCW_MASTER +#define CONFIG_SYS_HRCW_SLAVE2 CONFIG_SYS_HRCW_MASTER +#define CONFIG_SYS_HRCW_SLAVE3 CONFIG_SYS_HRCW_MASTER +#define CONFIG_SYS_HRCW_SLAVE4 CONFIG_SYS_HRCW_MASTER +#define CONFIG_SYS_HRCW_SLAVE5 CONFIG_SYS_HRCW_MASTER +#define CONFIG_SYS_HRCW_SLAVE6 CONFIG_SYS_HRCW_MASTER +#define CONFIG_SYS_HRCW_SLAVE7 CONFIG_SYS_HRCW_MASTER /*----------------------------------------------------------------------- * Internal Memory Mapped Register */ -#define CFG_IMMR 0xF0000000 +#define CONFIG_SYS_IMMR 0xF0000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR CFG_IMMR -#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR +#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE CMA_MB_RAM_BASE +#define CONFIG_SYS_SDRAM_BASE CMA_MB_RAM_BASE #ifdef CONFIG_CMA302 -#define CFG_FLASH_BASE CMA_MB_SLOT2_BASE /* cma302 in slot 2 */ +#define CONFIG_SYS_FLASH_BASE CMA_MB_SLOT2_BASE /* cma302 in slot 2 */ #else -#define CFG_FLASH_BASE CMA_MB_FLASH_BASE /* flash on m/b */ +#define CONFIG_SYS_FLASH_BASE CMA_MB_FLASH_BASE /* flash on m/b */ #endif -#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/ +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 2 /* max num of memory banks */ -#define CFG_MAX_FLASH_SECT 67 /* max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max num of sects on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR CFG_FLASH_BASE /* Addr of Environment Sector */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE /* Addr of Environment Sector */ #ifdef CONFIG_CMA302 -#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ -#define CFG_ENV_SECT_SIZE (512*1024) /* see README - env sect real size */ +#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_SECT_SIZE (512*1024) /* see README - env sect real size */ #else -#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ #endif /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ #if defined(CONFIG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ #endif /*----------------------------------------------------------------------- @@ -284,29 +284,29 @@ * * HID1 has only read-only information - nothing to set. */ -#define CFG_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\ +#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\ HID0_IFEM|HID0_ABE) -#define CFG_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE) -#define CFG_HID2 0 +#define CONFIG_SYS_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE) +#define CONFIG_SYS_HID2 0 /*----------------------------------------------------------------------- * RMR - Reset Mode Register 5-5 *----------------------------------------------------------------------- * turn on Checkstop Reset Enable */ -#define CFG_RMR RMR_CSRE +#define CONFIG_SYS_RMR RMR_CSRE /*----------------------------------------------------------------------- * BCR - Bus Configuration 4-25 *----------------------------------------------------------------------- */ -#define CFG_BCR BCR_EBM +#define CONFIG_SYS_BCR BCR_EBM /*----------------------------------------------------------------------- * SIUMCR - SIU Module Configuration 4-31 *----------------------------------------------------------------------- */ -#define CFG_SIUMCR (SIUMCR_DPPC11|SIUMCR_L2CPC10|SIUMCR_MMR11) +#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC11|SIUMCR_L2CPC10|SIUMCR_MMR11) /*----------------------------------------------------------------------- * SYPCR - System Protection Control 4-35 @@ -315,10 +315,10 @@ * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable */ #if defined(CONFIG_WATCHDOG) -#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ +#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE) #else -#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ +#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ SYPCR_SWRI|SYPCR_SWP) #endif /* CONFIG_WATCHDOG */ @@ -328,7 +328,7 @@ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, * and enable Time Counter */ -#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) +#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) /*----------------------------------------------------------------------- * PISCR - Periodic Interrupt Status and Control 4-42 @@ -336,20 +336,20 @@ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable * Periodic timer */ -#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) +#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) /*----------------------------------------------------------------------- * SCCR - System Clock Control 9-8 *----------------------------------------------------------------------- * Ensure DFBRG is Divide by 16 */ -#define CFG_SCCR (SCCR_DFBRG01) +#define CONFIG_SYS_SCCR (SCCR_DFBRG01) /*----------------------------------------------------------------------- * RCCR - RISC Controller Configuration 13-7 *----------------------------------------------------------------------- */ -#define CFG_RCCR 0 +#define CONFIG_SYS_RCCR 0 #if defined(CONFIG_CMA282) @@ -367,26 +367,26 @@ * (the *_SIZE vars must be a power of 2) */ -#define CFG_CMA_CS0_BASE TEXT_BASE /* EPROM */ -#define CFG_CMA_CS0_SIZE (1 << 20) +#define CONFIG_SYS_CMA_CS0_BASE TEXT_BASE /* EPROM */ +#define CONFIG_SYS_CMA_CS0_SIZE (1 << 20) #if 0 -#define CFG_CMA_CS2_BASE 0x10000000 /* Local Bus SDRAM */ -#define CFG_CMA_CS2_SIZE (16 << 20) +#define CONFIG_SYS_CMA_CS2_BASE 0x10000000 /* Local Bus SDRAM */ +#define CONFIG_SYS_CMA_CS2_SIZE (16 << 20) #endif /* * CS0 maps the EPROM on the cpu module - * Set it for 10 wait states, address CFG_MONITOR_BASE and size 1M + * Set it for 10 wait states, address CONFIG_SYS_MONITOR_BASE and size 1M * * Note: We must have already transferred control to the final location * of the EPROM before these are used, because when BR0/OR0 are set, the * mirror of the eprom at any other addresses will disappear. */ -/* base address = CFG_CMA_CS0_BASE, 16-bit, no parity, r/o, gpcm (60x bus) */ -#define CFG_BR0_PRELIM ((CFG_CMA_CS0_BASE&BRx_BA_MSK)|BRx_PS_16|BRx_WP|BRx_V) -/* mask size CFG_CMA_CS0_SIZE, csneg 1/4 early, adr-to-cs 1/2, 10-wait states */ -#define CFG_OR0_PRELIM (P2SZ_TO_AM(CFG_CMA_CS0_SIZE)|\ +/* base address = CONFIG_SYS_CMA_CS0_BASE, 16-bit, no parity, r/o, gpcm (60x bus) */ +#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_CMA_CS0_BASE&BRx_BA_MSK)|BRx_PS_16|BRx_WP|BRx_V) +/* mask size CONFIG_SYS_CMA_CS0_SIZE, csneg 1/4 early, adr-to-cs 1/2, 10-wait states */ +#define CONFIG_SYS_OR0_PRELIM (P2SZ_TO_AM(CONFIG_SYS_CMA_CS0_SIZE)|\ ORxG_CSNT|ORxG_ACS_DIV2|ORxG_SCY_10_CLK) /* @@ -399,10 +399,10 @@ */ #if 0 -/* base address = CFG_CMA_CS2_BASE, 32-bit, no parity, ??? */ -#define CFG_BR0_PRELIM ((CFG_CMA_CS2_BASE&BRx_BA_MSK)|BRx_PS_32|/*???*/|BRx_V) -/* mask size CFG_CMA_CS2_SIZE, CS time normal, ??? */ -#define CFG_OR2_PRELIM ((~(CFG_CMA_CS2_SIZE-1)&ORx_AM_MSK)|/*???*/) +/* base address = CONFIG_SYS_CMA_CS2_BASE, 32-bit, no parity, ??? */ +#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_CMA_CS2_BASE&BRx_BA_MSK)|BRx_PS_32|/*???*/|BRx_V) +/* mask size CONFIG_SYS_CMA_CS2_SIZE, CS time normal, ??? */ +#define CONFIG_SYS_OR2_PRELIM ((~(CONFIG_SYS_CMA_CS2_SIZE-1)&ORx_AM_MSK)|/*???*/) #endif #endif |