summaryrefslogtreecommitdiff
path: root/include/configs/cmi_mpc5xx.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/cmi_mpc5xx.h')
-rw-r--r--include/configs/cmi_mpc5xx.h112
1 files changed, 56 insertions, 56 deletions
diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h
index ac2b7a1..fa70a09 100644
--- a/include/configs/cmi_mpc5xx.h
+++ b/include/configs/cmi_mpc5xx.h
@@ -93,25 +93,25 @@
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
-#define CFG_MEMTEST_END 0x000fa000 /* 1 MB in SRAM */
+#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x000fa000 /* 1 MB in SRAM */
-#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CFG_HZ 1000 /* Decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 }
/*
@@ -121,39 +121,39 @@
/*
* Internal Memory Mapped (This is not the IMMR content)
*/
-#define CFG_IMMR 0x01000000 /* Physical start adress of internal memory map */
+#define CONFIG_SYS_IMMR 0x01000000 /* Physical start adress of internal memory map */
/*
* Definitions for initial stack pointer and data area
*/
-#define CFG_INIT_RAM_ADDR (CFG_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */
-#define CFG_INIT_RAM_END (CFG_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */
-#define CFG_GBL_DATA_SIZE 64 /* Size in bytes reserved for initial global data */
-#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_INIT_RAM_ADDR) - CFG_GBL_DATA_SIZE) /* Offset from the beginning of ram */
-#define CFG_INIT_SP_ADDR 0x013fa000 /* Physical start adress of inital stack */
+#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */
+#define CONFIG_SYS_INIT_RAM_END (CONFIG_SYS_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */
+#define CONFIG_SYS_GBL_DATA_SIZE 64 /* Size in bytes reserved for initial global data */
+#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_RAM_ADDR) - CONFIG_SYS_GBL_DATA_SIZE) /* Offset from the beginning of ram */
+#define CONFIG_SYS_INIT_SP_ADDR 0x013fa000 /* Physical start adress of inital stack */
/*
* Start addresses for the final memory configuration
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000 /* Monitor won't change memory map */
-#define CFG_FLASH_BASE 0x02000000 /* External flash */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* Monitor won't change memory map */
+#define CONFIG_SYS_FLASH_BASE 0x02000000 /* External flash */
#define PLD_BASE 0x03000000 /* PLD */
#define ANYBUS_BASE 0x03010000 /* Anybus Module */
-#define CFG_RESET_ADRESS 0x01000000 /* Adress which causes reset */
-#define CFG_MONITOR_BASE CFG_FLASH_BASE /* TEXT_BASE is defined in the board config.mk file. */
+#define CONFIG_SYS_RESET_ADRESS 0x01000000 /* Adress which causes reset */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* TEXT_BASE is defined in the board config.mk file. */
/* This adress is given to the linker with -Ttext to */
/* locate the text section at this adress. */
-#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#define CFG_MALLOC_LEN (64 << 10) /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN (64 << 10) /* Reserve 128 kB for malloc() */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
@@ -162,18 +162,18 @@
*
*/
-#define CFG_MAX_FLASH_BANKS 1 /* Max number of memory banks */
-#define CFG_MAX_FLASH_SECT 64 /* Max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */
-#define CFG_FLASH_PROTECTION 1 /* Physically section protection on */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_PROTECTION 1 /* Physically section protection on */
-#define CFG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_IS_IN_FLASH 1
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET 0x00020000 /* Environment starts at this adress */
-#define CFG_ENV_SIZE 0x00010000 /* Set whole sector as env */
-#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET 0x00020000 /* Environment starts at this adress */
+#define CONFIG_ENV_SIZE 0x00010000 /* Set whole sector as env */
+#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */
#endif
/*-----------------------------------------------------------------------
@@ -183,10 +183,10 @@
* SW Watchdog freeze
*/
#if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
#else
-#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
SYPCR_SWP)
#endif /* CONFIG_WATCHDOG */
@@ -195,14 +195,14 @@
*-----------------------------------------------------------------------
* Clear Reference Interrupt Status, Timebase freezing enabled
*/
-#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
/*-----------------------------------------------------------------------
* PISCR - Periodic Interrupt Status and Control
*-----------------------------------------------------------------------
* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
*/
-#define CFG_PISCR (PISCR_PITF)
+#define CONFIG_SYS_PISCR (PISCR_PITF)
/*-----------------------------------------------------------------------
* SCCR - System Clock and reset Control Register
@@ -211,7 +211,7 @@
* power management and some other internal clocks
*/
#define SCCR_MASK SCCR_EBDF00
-#define CFG_SCCR (SCCR_TBS | SCCR_RTDIV | SCCR_RTSEL | \
+#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_RTDIV | SCCR_RTSEL | \
SCCR_COM00 | SCCR_DFNL000 | SCCR_DFNH000)
/*-----------------------------------------------------------------------
@@ -219,7 +219,7 @@
*-----------------------------------------------------------------------
* Data show cycle
*/
-#define CFG_SIUMCR (SIUMCR_DBGC00) /* Disable data show cycle */
+#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00) /* Disable data show cycle */
/*-----------------------------------------------------------------------
* PLPRCR - PLL, Low-Power, and Reset Control Register
@@ -227,8 +227,8 @@
* Set all bits to 40 Mhz
*
*/
-#define CFG_OSC_CLK ((uint)4000000) /* Oscillator clock is 4MHz */
-#define CFG_PLPRCR (PLPRCR_MF_9 | PLPRCR_DIVF_0)
+#define CONFIG_SYS_OSC_CLK ((uint)4000000) /* Oscillator clock is 4MHz */
+#define CONFIG_SYS_PLPRCR (PLPRCR_MF_9 | PLPRCR_DIVF_0)
/*-----------------------------------------------------------------------
@@ -236,36 +236,36 @@
*-----------------------------------------------------------------------
*
*/
-#define CFG_UMCR (UMCR_FSPEED) /* IMB clock same as U-bus */
+#define CONFIG_SYS_UMCR (UMCR_FSPEED) /* IMB clock same as U-bus */
/*-----------------------------------------------------------------------
* ICTRL - I-Bus Support Control Register
*/
-#define CFG_ICTRL (ICTRL_ISCT_SER_7) /* Take out of serialized mode */
+#define CONFIG_SYS_ICTRL (ICTRL_ISCT_SER_7) /* Take out of serialized mode */
/*-----------------------------------------------------------------------
* USIU - Memory Controller Register
*-----------------------------------------------------------------------
*/
-#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_V | BR_BI | BR_PS_16)
-#define CFG_OR0_PRELIM (OR_ADDR_MK_FF | OR_SCY_3)
-#define CFG_BR1_PRELIM (ANYBUS_BASE)
-#define CFG_OR1_PRELIM (OR_ADDR_MK_FFFF | OR_SCY_1 | OR_ETHR)
-#define CFG_BR2_PRELIM (CFG_SDRAM_BASE | BR_V | BR_PS_32)
-#define CFG_OR2_PRELIM (OR_ADDR_MK_FF)
-#define CFG_BR3_PRELIM (PLD_BASE | BR_V | BR_BI | BR_LBDIR | BR_PS_8)
-#define CFG_OR3_PRELIM (OR_ADDR_MK_FF | OR_TRLX | OR_BSCY | OR_SCY_8 | \
+#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_V | BR_BI | BR_PS_16)
+#define CONFIG_SYS_OR0_PRELIM (OR_ADDR_MK_FF | OR_SCY_3)
+#define CONFIG_SYS_BR1_PRELIM (ANYBUS_BASE)
+#define CONFIG_SYS_OR1_PRELIM (OR_ADDR_MK_FFFF | OR_SCY_1 | OR_ETHR)
+#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_SDRAM_BASE | BR_V | BR_PS_32)
+#define CONFIG_SYS_OR2_PRELIM (OR_ADDR_MK_FF)
+#define CONFIG_SYS_BR3_PRELIM (PLD_BASE | BR_V | BR_BI | BR_LBDIR | BR_PS_8)
+#define CONFIG_SYS_OR3_PRELIM (OR_ADDR_MK_FF | OR_TRLX | OR_BSCY | OR_SCY_8 | \
OR_ACS_10 | OR_ETHR | OR_CSNT)
-#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* We don't realign the flash */
+#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* We don't realign the flash */
/*-----------------------------------------------------------------------
* DER - Timer Decrementer
*-----------------------------------------------------------------------
* Initialise to zero
*/
-#define CFG_DER 0x00000000
+#define CONFIG_SYS_DER 0x00000000
/*