diff options
Diffstat (limited to 'include/configs/cerf250.h')
| -rw-r--r-- | include/configs/cerf250.h | 229 |
1 files changed, 0 insertions, 229 deletions
diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h deleted file mode 100644 index 70427da..0000000 --- a/include/configs/cerf250.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * Configuation settings for the CERF250 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_CERF250 1 /* on Cerf PXA Board */ -#define CONFIG_BOARD_LATE_INIT -#define CONFIG_BAUDRATE 38400 -#define CONFIG_SYS_TEXT_BASE 0x0 - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE 0x04000300 -#define CONFIG_SMC_USE_32_BIT - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on CERF PXA */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ETHADDR 00:D0:CA:F1:3C:D2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.0.5 -#define CONFIG_SERVERIP 192.168.0.2 -#define CONFIG_BOOTCOMMAND "bootm 0xC0000" -#define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,38400" -#define CONFIG_CMDLINE_TAG - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "uboot$ " /* Monitor Command Prompt */ -#else -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ -#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* - * GPIO settings - */ - - -#define CONFIG_SYS_GPSR0_VAL 0x00408030 -#define CONFIG_SYS_GPSR1_VAL 0x00BFA882 -#define CONFIG_SYS_GPSR2_VAL 0x0001C000 -#define CONFIG_SYS_GPCR0_VAL 0xC0031100 -#define CONFIG_SYS_GPCR1_VAL 0xFC400300 -#define CONFIG_SYS_GPCR2_VAL 0x00003FFF -#define CONFIG_SYS_GPDR0_VAL 0xC0439330 -#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB82 -#define CONFIG_SYS_GPDR2_VAL 0x0001FFFF -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 -#define CONFIG_SYS_GAFR0_U_VAL 0xA5000010 -#define CONFIG_SYS_GAFR1_L_VAL 0x60008018 -#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA -#define CONFIG_SYS_GAFR2_L_VAL 0xAAA0000A -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 - -#define CONFIG_SYS_PSSR_VAL 0x20 - -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 -#define CONFIG_SYS_CKEN 0x0 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x12447FF0 -#define CONFIG_SYS_MSC1_VAL 0x12BC5554 -#define CONFIG_SYS_MSC2_VAL 0x7FF97FF1 -#define CONFIG_SYS_MDCNFG_VAL 0x00001AC9 -#define CONFIG_SYS_MDREFR_VAL 0x03CDC017 -#define CONFIG_SYS_MDMRS_VAL 0x00000000 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00010504 -#define CONFIG_SYS_MCMEM1_VAL 0x00010504 -#define CONFIG_SYS_MCATT0_VAL 0x00010504 -#define CONFIG_SYS_MCATT1_VAL 0x00010504 -#define CONFIG_SYS_MCIO0_VAL 0x00004715 -#define CONFIG_SYS_MCIO1_VAL 0x00004715 - -#define _LED 0x08000010 /*check this */ -#define LED_BLANK 0x08000040 -#define LED_GPIO 0x10 - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_SYS_MONITOR_LEN 0x40000 /* 256 KiB */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ - - -#endif /* __CONFIG_H */ |