diff options
Diffstat (limited to 'include/configs/bluestone.h')
| -rw-r--r-- | include/configs/bluestone.h | 168 |
1 files changed, 0 insertions, 168 deletions
diff --git a/include/configs/bluestone.h b/include/configs/bluestone.h deleted file mode 100644 index 8bd71c6..0000000 --- a/include/configs/bluestone.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - * bluestone.h - configuration for Bluestone (APM821XX) - * - * Copyright (c) 2010, Applied Micro Circuits Corporation - * Author: Tirumala R Marri <tmarri@apm.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_APM821XX 1 /* APM821XX series */ -#define CONFIG_HOSTNAME bluestone - -#define CONFIG_440 1 - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 -#endif - -/* - * Include common defines/options for all AMCC eval boards - */ -#include "amcc-common.h" -#define CONFIG_SYS_CLK_FREQ 50000000 - -#define CONFIG_BOARD_TYPES 1 /* support board types */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ - -/* - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - */ -/* EBC stuff */ -/* later mapped to this addr */ -#define CONFIG_SYS_FLASH_BASE 0xFFF00000 -#define CONFIG_SYS_FLASH_SIZE (4 << 20) /* 1MB usable */ - -/* EBC Boot Space: 0xFF000000 */ -#define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000 -#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 32k */ -#define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */ -#define CONFIG_SYS_AHB_BASE 0xE2000000 /* internal AHB peripherals*/ - -#define CONFIG_SYS_SRAM_SIZE (256 << 10) -/* - * Initial RAM & stack pointer (placed in OCM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ -#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* - * Environment - */ -/* - * Define here the location of the environment variables (FLASH). - */ -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ - -/* - * FLASH related - */ -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -/* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 80 -/* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 -/* Timeout for Flash Write (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 -/* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 -/* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_EMPTY_INFO -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_FLASH */ - -/* SDRAM */ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ -#define SPD_EEPROM_ADDRESS {0x53, 0x51} /* SPD i2c spd addresses */ -#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */ -#define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */ -#define CONFIG_DDR_ECC 1 /* with ECC support */ - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ - -/* - * I2C - */ -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 /* Data sheet */ - -/* I2C bootstrap EEPROM */ -#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52 -#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 -#define CONFIG_4xx_CONFIG_BLOCKSIZE 16 - -/* - * Ethernet - */ -#define CONFIG_IBM_EMAC4_V4 1 -#define CONFIG_EMAC_PHY_MODE EMAC_PHY_MODE_NONE_RGMII -#define CONFIG_HAS_ETH0 -/* PHY address, See schematics */ -#define CONFIG_PHY_ADDR 0x1f -/* reset phy upon startup */ -#define CONFIG_PHY_RESET 1 -/* Include GbE speed/duplex detection */ -#define CONFIG_PHY_GIGE 1 -#define CONFIG_PHY_DYNAMIC_ANEG 1 - -/* - * External Bus Controller (EBC) Setup - **/ -#define CONFIG_SYS_EBC_CFG (EBC_CFG_LE_LOCK | \ - EBC_CFG_PTD_ENABLE | \ - EBC_CFG_RTC_2048PERCLK | \ - EBC_CFG_ATC_HI | \ - EBC_CFG_DTC_HI | \ - EBC_CFG_CTC_HI | \ - EBC_CFG_OEO_PREVIOUS) -/* NOR Flash */ -#define CONFIG_SYS_EBC_PB0AP (EBC_BXAP_BME_DISABLED | \ - EBC_BXAP_TWT_ENCODE(64) | \ - EBC_BXAP_BCE_DISABLE | \ - EBC_BXAP_BCT_2TRANS | \ - EBC_BXAP_CSN_ENCODE(1) | \ - EBC_BXAP_OEN_ENCODE(2) | \ - EBC_BXAP_WBN_ENCODE(2) | \ - EBC_BXAP_WBF_ENCODE(2) | \ - EBC_BXAP_TH_ENCODE(7) | \ - EBC_BXAP_SOR_DELAYED | \ - EBC_BXAP_BEM_WRITEONLY | \ - EBC_BXAP_PEN_DISABLED) -/* Peripheral Bank Configuration Register - EBC_BxCR */ -#define CONFIG_SYS_EBC_PB0CR \ - (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | \ - EBC_BXCR_BS_1MB | \ - EBC_BXCR_BU_RW | \ - EBC_BXCR_BW_8BIT) - - -#endif /* __CONFIG_H */ |