diff options
Diffstat (limited to 'include/configs/bf561-ezkit.h')
| -rw-r--r-- | include/configs/bf561-ezkit.h | 244 |
1 files changed, 244 insertions, 0 deletions
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h new file mode 100644 index 0000000..8d826fa --- /dev/null +++ b/include/configs/bf561-ezkit.h @@ -0,0 +1,244 @@ +/* + * U-boot - Configuration file for BF561 EZKIT board + */ + +#ifndef __CONFIG_EZKIT561_H__ +#define __CONFIG_EZKIT561_H__ + +#define CONFIG_VDSP 1 +#define CONFIG_BF561 1 + +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_BAUDRATE 57600 +/* Set default serial console for bf537 */ +#define CONFIG_UART_CONSOLE 0 +#define CONFIG_EZKIT561 1 +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_PANIC_HANG 1 + +/* +* Boot Mode Set +* Blackfin can support several boot modes +*/ +#define BF561_BYPASS_BOOT 0x21 +#define BF561_PARA_BOOT 0x22 +#define BF561_SPI_BOOT 0x24 +/* Define the boot mode */ +#define BFIN_BOOT_MODE BF561_BYPASS_BOOT + +/* This sets the default state of the cache on U-Boot's boot */ +#define CONFIG_ICACHE_ON +#define CONFIG_DCACHE_ON + +/* Define where the uboot will be loaded by on-chip boot rom */ +#define APP_ENTRY 0x00001000 + +/* + * Stringize definitions - needed for environmental settings + */ +#define STRINGIZE2(x) #x +#define STRINGIZE(x) STRINGIZE2(x) + +/* + * Board settings + */ +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x2C010300 +#define CONFIG_ASYNC_EBIU_BASE CONFIG_SMC91111_BASE & ~(4*1024*1024) +#define CONFIG_SMC_USE_32_BIT 1 +#define CONFIG_MISC_INIT_R 1 + +/* + * Clock settings + */ + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 30000000 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 20 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 +/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider */ +/* Values can range from 2-65535 */ +/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ +#define CONFIG_SPI_BAUD 2 +#define CONFIG_SPI_BAUD_INITBLOCK 4 + +/* + * Network settings + */ +#if (CONFIG_DRIVER_SMC91111) +#define CONFIG_IPADDR 192.168.0.15 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_HOSTNAME ezkit561 +#define CONFIG_ROOTPATH /arm-cross-build/BF561/uClinux-dist/romfs +#endif /* CONFIG_DRIVER_SMC91111 */ + +/* + * Flash settings + */ + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI_AMD_RESET +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_FLASH_BASE 0x20000000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 135 /* max number of sectors on one chip */ +#define CFG_ENV_ADDR 0x20020000 +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 8 + +/* + * SDRAM settings & memory map + */ + +#define CONFIG_MEM_SIZE 64 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 9 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC16M16A2TG_75 1 + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024) + +#define CFG_MEMTEST_START 0x0 /* memtest works on */ +#define CFG_MEMTEST_END ( (CONFIG_MEM_SIZE - 1) * 1024*1024) /* 1 ... 63 MB in DRAM */ + +#define CONFIG_LOADADDR 0x01000000 /* default load address */ +#define CFG_LOAD_ADDR CONFIG_LOADADDR +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) + +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) + +#define CFG_GBL_DATA_SIZE 0x4000 +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +/* + * Command settings + */ + +#define CFG_AUTOLOAD "no" /* rarpb, bootp, dhcp commands will */ + /* only perform a configuration */ + /* lookup from the BOOTP/DHCP server */ + /* but not try to load any image */ + /* using TFTP */ +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, */ + /* currently its disabled */ +#define CONFIG_BOOTCOMMAND "run ramboot" +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" + +#if (CONFIG_DRIVER_SMC91111) +#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_DHCP) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ + "$(rootpath) console=ttyBF0,57600\0" \ + "addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \ + "$(gatewayip):$(netmask):$(hostname):eth0:off\0" \ + "ramboot=tftpboot $(loadaddr) linux; " \ + "run ramargs; run addip; bootelf\0" \ + "nfsboot=tftpboot $(loadaddr) linux; " \ + "run nfsargs; run addip; bootelf\0" \ + "update=tftpboot $(loadaddr) u-boot.bin; " \ + "protect off 0x20000000 0x2003FFFF; " \ + "erase 0x20000000 0x2003FFFF; " \ + "cp.b $(loadaddr) 0x20000000 $(filesize)\0" \ + "" +#else +#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ + CFG_CMD_ELF | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "flashboot=bootm 0x20100000\0" \ + "" +#endif + +#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Console settings + */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_LOADS_ECHO 1 + +/* + * Miscellaneous configurable options + */ +#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */ +#define CFG_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ + +/* + * FLASH organization and environment definitions + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +#define AMGCTLVAL 0x3F +#define AMBCTL0VAL 0x7BB07BB0 +#define AMBCTL1VAL 0xFFC27BB0 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + +#endif /* __CONFIG_EZKIT561_H__ */ |