diff options
Diffstat (limited to 'include/configs/bf533-ezkit.h')
| -rw-r--r-- | include/configs/bf533-ezkit.h | 78 |
1 files changed, 39 insertions, 39 deletions
diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index b35e362..e871737 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -10,9 +10,9 @@ #define CONFIG_BAUDRATE 57600 #define CONFIG_BOOTDELAY 5 -#define CFG_AUTOLOAD "no" /*rarpb, bootp or dhcp commands will perform only a */ +#define CONFIG_SYS_AUTOLOAD "no" /*rarpb, bootp or dhcp commands will perform only a */ -#define CFG_LONGHELP 1 +#define CONFIG_SYS_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_LOADADDR 0x01000000 /* default load address */ #define CONFIG_BOOTCOMMAND "tftp $(loadaddr) linux" @@ -23,7 +23,7 @@ #if 0 #define CONFIG_MII -#define CFG_DISCOVER_PHY +#define CONFIG_SYS_DISCOVER_PHY #endif #define CONFIG_RTC_BFIN 1 @@ -105,48 +105,48 @@ #define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off console=ttyBF0,57600" -#define CFG_PROMPT "bfin> " /* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT "bfin> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00000000 /* memtest works on */ -#define CFG_MEMTEST_END ( (CONFIG_MEM_SIZE - 1) * 1024 * 1024) /* 1 ... 31 MB in DRAM */ -#define CFG_LOAD_ADDR 0x01000000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024) -#define CFG_FLASH_BASE 0x20000000 - -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) -#define CFG_GBL_DATA_SIZE 0x4000 -#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) -#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) - -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -#define CFG_FLASH0_BASE 0x20000000 -#define CFG_FLASH1_BASE 0x20200000 -#define CFG_FLASH2_BASE 0x20280000 -#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 40 /* max number of sectors on one chip */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END ( (CONFIG_MEM_SIZE - 1) * 1024 * 1024) /* 1 ... 31 MB in DRAM */ +#define CONFIG_SYS_LOAD_ADDR 0x01000000 /* default load address */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 10 ms ticks */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024) +#define CONFIG_SYS_FLASH_BASE 0x20000000 + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN) +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) +#define CONFIG_SYS_GBL_DATA_SIZE 0x4000 +#define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CONFIG_SYS_GBL_DATA_ADDR - 4) + +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_FLASH0_BASE 0x20000000 +#define CONFIG_SYS_FLASH1_BASE 0x20200000 +#define CONFIG_SYS_FLASH2_BASE 0x20280000 +#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 40 /* max number of sectors on one chip */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_ADDR 0x20020000 #define CONFIG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ /* JFFS Partition offset set */ -#define CFG_JFFS2_FIRST_BANK 0 -#define CFG_JFFS2_NUM_BANKS 1 +#define CONFIG_SYS_JFFS2_FIRST_BANK 0 +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 /* 512k reserved for u-boot */ -#define CFG_JFFS2_FIRST_SECTOR 11 +#define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 /* @@ -157,7 +157,7 @@ #define POLL_MODE 1 #define FLASH_TOT_SECT 40 #define FLASH_SIZE 0x220000 -#define CFG_FLASH_SIZE 0x220000 +#define CONFIG_SYS_FLASH_SIZE 0x220000 /* * Initialize PSD4256 registers for using I2C @@ -197,10 +197,10 @@ } #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#define CFG_I2C_SPEED 50000 -#define CFG_I2C_SLAVE 0xFE +#define CONFIG_SYS_I2C_SPEED 50000 +#define CONFIG_SYS_I2C_SLAVE 0xFE -#define CFG_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ +#define CONFIG_SYS_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ #define CONFIG_EBIU_SDRRC_VAL 0x398 #define CONFIG_EBIU_SDGCTL_VAL 0x91118d |