diff options
Diffstat (limited to 'include/configs/at91sam9263ek.h')
| -rw-r--r-- | include/configs/at91sam9263ek.h | 89 |
1 files changed, 46 insertions, 43 deletions
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 571351c..5cafa1e 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -28,7 +28,7 @@ #define __CONFIG_H /* ARM asynchronous clock */ -#define AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ +#define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ #define CONFIG_SYS_HZ 1000 #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ @@ -49,6 +49,7 @@ /* * Hardware drivers */ +#define CONFIG_AT91_GPIO 1 #define CONFIG_ATMEL_USART 1 #undef CONFIG_USART0 #undef CONFIG_USART1 @@ -69,9 +70,9 @@ /* LED */ #define CONFIG_AT91_LED -#define CONFIG_RED_LED AT91_PIN_PB7 /* this is the power led */ -#define CONFIG_GREEN_LED AT91_PIN_PB8 /* this is the user1 led */ -#define CONFIG_YELLOW_LED AT91_PIN_PC29 /* this is the user2 led */ +#define CONFIG_RED_LED AT91_PIO_PORTB, 7 /* the power led */ +#define CONFIG_GREEN_LED AT91_PIO_PORTB, 8 /* the user1 led */ +#define CONFIG_YELLOW_LED AT91_PIO_PORTC, 29 /* the user2 led */ #define CONFIG_BOOTDELAY 3 @@ -147,39 +148,36 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT #define MASTER_PLL_MUL 171 #define MASTER_PLL_DIV 14 +#define MASTER_PLL_OUT 3 /* clocks */ #define CONFIG_SYS_MOR_VAL \ - (AT91_PMC_MOSCEN | \ - (255 << 8)) /* Main Oscillator Start-up Time */ -#define CONFIG_SYS_PLLAR_VAL \ - (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ - AT91_PMC_OUT | \ - AT91_PMC_PLLCOUNT | /* PLL Counter */ \ - (2 << 28) | /* PLL Clock Frequency Range */ \ - ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) + (AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255)) +#define CONFIG_SYS_PLLAR_VAL \ + (AT91_PMC_PLLAR_29 | \ + AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \ + AT91_PMC_PLLXR_PLLCOUNT(63) | \ + AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \ + AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV)) /* PCK/2 = MCK Master Clock from PLLA */ #define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_CSS_SLOW | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) + (AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \ + AT91_PMC_MCKR_MDIV_2) + /* PCK/2 = MCK Master Clock from PLLA */ #define CONFIG_SYS_MCKR2_VAL \ - (AT91_PMC_CSS_PLLA | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) + (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \ + AT91_PMC_MCKR_MDIV_2) /* define PDC[31:16] as DATA[31:16] */ #define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 /* no pull-up for D[31:16] */ #define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ -#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \ - (AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V | \ - AT91_MATRIX_EBI0_CS1A_SDRAMC) +#define CONFIG_SYS_MATRIX_EBICSA_VAL \ + (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \ + AT91_MATRIX_CSA_EBI_CS1A) /* SDRAM */ /* SDRAMC_MR Mode register */ @@ -221,33 +219,32 @@ #define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ -#define CONFIG_SYS_SMC0_SETUP0_VAL \ - (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | \ - AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10)) -#define CONFIG_SYS_SMC0_PULSE0_VAL \ - (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | \ - AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11)) +#define CONFIG_SYS_SMC0_SETUP0_VAL \ + (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ + AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) +#define CONFIG_SYS_SMC0_PULSE0_VAL \ + (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ + AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) #define CONFIG_SYS_SMC0_CYCLE0_VAL \ - (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22)) + (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) #define CONFIG_SYS_SMC0_MODE0_VAL \ - (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ - AT91_SMC_DBW_16 | \ - AT91_SMC_TDFMODE | \ - AT91_SMC_TDF_(6)) + (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ + AT91_SMC_MODE_DBW_16 | \ + AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6)) /* user reset enable */ #define CONFIG_SYS_RSTC_RMR_VAL \ (AT91_RSTC_KEY | \ - AT91_RSTC_PROCRST | \ - AT91_RSTC_RSTTYP_WAKEUP | \ - AT91_RSTC_RSTTYP_WATCHDOG) + AT91_RSTC_MR_URSTEN | \ + AT91_RSTC_MR_ERSTL(15)) /* Disable Watchdog */ #define CONFIG_SYS_WDTC_WDMR_VAL \ - (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \ - AT91_WDT_WDV | \ - AT91_WDT_WDDIS | \ - AT91_WDT_WDD) + (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ + AT91_WDT_MR_WDV(0xfff) | \ + AT91_WDT_MR_WDDIS | \ + AT91_WDT_MR_WDD(0xfff)) + #endif #else @@ -264,9 +261,15 @@ #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22 +/* +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 +*/ + +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet */ |