diff options
Diffstat (limited to 'include/configs/at91sam9260ek.h')
| -rw-r--r-- | include/configs/at91sam9260ek.h | 68 |
1 files changed, 34 insertions, 34 deletions
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 41d1da3..be9a8eb 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -30,7 +30,7 @@ /* ARM asynchronous clock */ #define AT91_MAIN_CLOCK 198656000 /* from 18.432 MHz crystal */ #define AT91_MASTER_CLOCK 99328000 /* peripheral = main / 2 */ -#define CFG_HZ 1000000 /* 1us resolution */ +#define CONFIG_SYS_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ @@ -88,22 +88,22 @@ /* DataFlash */ #define CONFIG_HAS_DATAFLASH 1 -#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) -#define CFG_MAX_DATAFLASH_BANKS 2 -#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -#define CFG_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ +#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) +#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 +#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ +#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ #define AT91_SPI_CLK 15000000 #define DATAFLASH_TCSS (0x1a << 16) #define DATAFLASH_TCHS (0x1 << 24) /* NAND flash */ #define NAND_MAX_CHIPS 1 -#define CFG_MAX_NAND_DEVICE 1 -#define CFG_NAND_BASE 0x40000000 -#define CFG_NAND_DBW_8 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 /* NOR flash - no real flash on this board */ -#define CFG_NO_FLASH 1 +#define CONFIG_SYS_NO_FLASH 1 /* Ethernet */ #define CONFIG_MACB 1 @@ -116,28 +116,28 @@ #define CONFIG_USB_OHCI_NEW 1 #define LITTLEENDIAN 1 #define CONFIG_DOS_PARTITION 1 -#define CFG_USB_OHCI_CPU_INIT 1 -#define CFG_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ -#define CFG_USB_OHCI_SLOT_NAME "at91sam9260" -#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE 1 -#define CFG_LOAD_ADDR 0x22000000 /* load address */ +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ -#define CFG_MEMTEST_START PHYS_SDRAM -#define CFG_MEMTEST_END 0x23e00000 +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END 0x23e00000 -#undef CFG_USE_DATAFLASH_CS0 -#define CFG_USE_DATAFLASH_CS1 1 -#undef CFG_USE_NANDFLASH +#undef CONFIG_SYS_USE_DATAFLASH_CS0 +#define CONFIG_SYS_USE_DATAFLASH_CS1 1 +#undef CONFIG_SYS_USE_NANDFLASH -#ifdef CFG_USE_DATAFLASH_CS0 +#ifdef CONFIG_SYS_USE_DATAFLASH_CS0 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ #define CONFIG_ENV_IS_IN_DATAFLASH 1 -#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) #define CONFIG_ENV_OFFSET 0x4200 -#define CONFIG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) #define CONFIG_ENV_SIZE 0x4200 #define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ @@ -145,13 +145,13 @@ "mtdparts=at91_nand:-(root) " \ "rw rootfstype=jffs2" -#elif CFG_USE_DATAFLASH_CS1 +#elif CONFIG_SYS_USE_DATAFLASH_CS1 /* bootstrap + u-boot + env + linux in dataflash on CS1 */ #define CONFIG_ENV_IS_IN_DATAFLASH 1 -#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) #define CONFIG_ENV_OFFSET 0x4200 -#define CONFIG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET) #define CONFIG_ENV_SIZE 0x4200 #define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm" #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ @@ -159,7 +159,7 @@ "mtdparts=at91_nand:-(root) " \ "rw rootfstype=jffs2" -#else /* CFG_USE_NANDFLASH */ +#else /* CONFIG_SYS_USE_NANDFLASH */ /* bootstrap + u-boot + env + linux in nandflash */ #define CONFIG_ENV_IS_IN_NAND 1 @@ -177,21 +177,21 @@ #endif #define CONFIG_BAUDRATE 115200 -#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } -#define CFG_PROMPT "U-Boot> " -#define CFG_CBSIZE 256 -#define CFG_MAXARGS 16 -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) -#define CFG_LONGHELP 1 +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 #define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32*1024) /* regular stack */ |