diff options
Diffstat (limited to 'include/configs/apollon.h')
| -rw-r--r-- | include/configs/apollon.h | 261 |
1 files changed, 0 insertions, 261 deletions
diff --git a/include/configs/apollon.h b/include/configs/apollon.h deleted file mode 100644 index b8ca8a8..0000000 --- a/include/configs/apollon.h +++ /dev/null @@ -1,261 +0,0 @@ -/* - * (C) Copyright 2005-2008 - * Samsung Electronics, - * Kyungmin Park <kyungmin.park@samsung.com> - * - * Configuration settings for the 2420 Samsung Apollon board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP2420 1 /* which is in a 2420 */ -#define CONFIG_OMAP2420_APOLLON 1 -#define CONFIG_APOLLON 1 -#define CONFIG_APOLLON_PLUS 1 /* If you have apollon plus 1.x */ - -#define CONFIG_ONENAND_U_BOOT y - -/* Clock config to target*/ -#define PRCM_CONFIG_I 1 -/* #define PRCM_CONFIG_II 1 */ - -/* Boot method */ -/* uncomment if you use NOR boot */ -/* #define CONFIG_SYS_NOR_BOOT 1 */ - -/* uncomment if you use NOR on CS3 */ -/* #define CONFIG_SYS_USE_NOR 1 */ - -#ifdef CONFIG_SYS_NOR_BOOT -#undef CONFIG_SYS_USE_NOR -#define CONFIG_SYS_USE_NOR 1 -#endif - -/* uncommnet if you want to use UBI */ -#define CONFIG_SYS_USE_UBI - -#include <asm/arch/omap2420.h> /* get chip and board defs */ - -#define V_SCLK 12000000 - -/* input clock of PLL */ -/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ -#define CONFIG_SYS_CLK_FREQ V_SCLK - -#define CONFIG_MISC_INIT_R - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ -#define CONFIG_ENV_SIZE_FLEX SZ_256K -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_1M) - -/* - * Hardware drivers - */ - -/* - * SMC91c96 Etherent - */ -#define CONFIG_LAN91C96 -#define CONFIG_LAN91C96_BASE (APOLLON_CS1_BASE+0x300) -#define CONFIG_LAN91C96_EXT_PHY - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ -#define CONFIG_SYS_NS16550_COM1 OMAP2420_UART1 - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* UART1 on H4 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_ONENAND - -#ifdef CONFIG_SYS_USE_UBI -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_MTD_PARTITIONS -#endif - -#undef CONFIG_CMD_SOURCE - -#ifndef CONFIG_SYS_USE_NOR -# undef CONFIG_CMD_FLASH -# undef CONFIG_CMD_IMLS -#endif - -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT - -#define CONFIG_BOOTDELAY 1 - -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.116.25 -#define CONFIG_SERVERIP 192.168.116.1 -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_ETHADDR 00:0E:99:00:24:20 - -#ifdef CONFIG_APOLLON_PLUS -#define CONFIG_SYS_MEM "mem=64M" -#else -#define CONFIG_SYS_MEM "mem=128" -#endif - -#ifdef CONFIG_SYS_USE_UBI -#define CONFIG_SYS_UBI "ubi.mtd=4" -#else -#define CONFIG_SYS_UBI "" -#endif - -#define CONFIG_BOOTARGS "root=/dev/nfs rw " CONFIG_SYS_MEM \ - " console=ttyS0,115200n8" \ - " ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:" \ - "apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2 " \ - CONFIG_SYS_UBI - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "Image=tftp 0x80008000 Image; go 0x80008000\0" \ - "zImage=tftp 0x80180000 zImage; go 0x80180000\0" \ - "uImage=tftp 0x80180000 uImage; bootm 0x80180000\0" \ - "uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0" \ - "xloader=tftp 0x80180000 x-load.bin; " \ - " cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0" \ - "syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0" \ - "syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0" \ - "norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0" \ - "oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0" \ - "onesyncboot=run syncmode oneboot\0" \ - "updateb=tftp 0x80180000 u-boot-onenand.bin; " \ - " onenand erase 0x0 0x20000; onenand write 0x80180000 0x0 0x20000\0" \ - "ubi=setenv bootargs ${bootargs} ubi.mtd=4 ${mtdparts}; run uImage\0" \ - "bootcmd=run uboot\0" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "Apollon # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0) - -/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) - * or by 32KHz clk, or from external sig. This rate is divided by a local - * divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP2420_GPT2 -#define CONFIG_SYS_PTV 7 /* 2^(PTV+1) */ -#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE SZ_128M -#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#ifdef CONFIG_SYS_USE_NOR -/* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */ -# define CONFIG_SYS_FLASH_BASE 0x18000000 -# define CONFIG_SYS_MAX_FLASH_BANKS 1 -# define CONFIG_SYS_MAX_FLASH_SECT 1024 -/*----------------------------------------------------------------------- - * CFI FLASH driver setup - */ -/* Flash memory is CFI compliant */ -# define CONFIG_SYS_FLASH_CFI 1 -# define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ -/* Use buffered writes (~10x faster) */ -/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */ -/* Use h/w sector protection*/ -# define CONFIG_SYS_FLASH_PROTECTION 1 - -#else /* !CONFIG_SYS_USE_NOR */ -# define CONFIG_SYS_NO_FLASH 1 -#endif /* CONFIG_SYS_USE_NOR */ - -/* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */ -#define CONFIG_SYS_ONENAND_BASE 0x00000000 -#define CONFIG_SYS_MONITOR_LEN SZ_256K /* U-Boot image size */ -#define CONFIG_ENV_IS_IN_ONENAND 1 -#define CONFIG_ENV_ADDR 0x00020000 -#define CONFIG_ENV_ADDR_FLEX 0x00040000 - -#ifdef CONFIG_SYS_USE_UBI -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "onenand0=onenand" -#define MTDPARTS_DEFAULT "mtdparts=onenand:128k(bootloader)," \ - "128k(params)," \ - "2m(kernel)," \ - "16m(rootfs)," \ - "32m(fs)," \ - "-(ubifs)" -#endif - -#define PHYS_SRAM 0x4020F800 -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM - -#endif /* __CONFIG_H */ |