diff options
Diffstat (limited to 'include/configs/ZUMA.h')
| -rw-r--r-- | include/configs/ZUMA.h | 370 |
1 files changed, 0 insertions, 370 deletions
diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h deleted file mode 100644 index cac6a67..0000000 --- a/include/configs/ZUMA.h +++ /dev/null @@ -1,370 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_SYS_GT_6426x GT_64260 /* with a 64260 system controller */ -#define CONFIG_ETHER_PORT_MII /* use two MII ports */ -#define CONFIG_INTEL_LXT97X /* Intel LXT97X phy */ - -#ifndef __ASSEMBLY__ -#include <galileo/core.h> -#endif - -#include "../board/evb64260/local.h" - -#define CONFIG_EVB64260 1 /* this is an EVB64260 board */ -#define CONFIG_ZUMA_V2 1 /* always define this for ZUMA v2 */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -/* #define CONFIG_ZUMA_V2_OLD 1 */ /* backwards compat for old V2 board */ - -#define CONFIG_BAUDRATE 38400 /* console baudrate = 38400 */ - -#define CONFIG_ECC /* enable ECC support */ - -#define CONFIG_750CX /* we have a 750CX/CXe (override local.h) */ - -/* which initialization functions to call for this board */ -#define CONFIG_MISC_INIT_R -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_SYS_BOARD_ASM_INIT - -#define CONFIG_SYS_BOARD_NAME "Zuma APv2" - -#define CONFIG_SYS_HUSH_PARSER - -/* - * The following defines let you select what serial you want to use - * for your console driver. - * - * what to do: - * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial - * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1 - * to 0 below. - * - * to use the MPSC, #define CONFIG_MPSC. If you have wired up another - * mpsc channel, change CONFIG_MPSC_PORT to the desired value. - */ -#define CONFIG_MPSC - -#define CONFIG_MPSC_PORT 0 - - -/* define this if you want to enable GT MAC filtering */ -#define CONFIG_GT_USE_MAC_HASH_TABLE - -#if 1 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif -#define CONFIG_ZERO_BOOTDELAY_CHECK - -#undef CONFIG_BOOTARGS - -#define CONFIG_BOOTCOMMAND \ - "tftpboot && " \ - "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:" \ - "$netmask:$hostname:eth0:none panic=5 && bootm" - -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#undef CONFIG_ALTIVEC /* undef to disable */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - -#define CONFIG_MII /* enable MII commands */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BSP -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_DATE - - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2" -#define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)" -*/ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */ - -#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_RAM_LOCK - - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xfff00000 -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ - -/* areas to map different things with the GT in physical space */ -#define CONFIG_SYS_DRAM_BANKS 4 -#define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */ - -/* What to put in the bats. */ -#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000 - -/* Peripheral Device section */ -#define CONFIG_SYS_GT_REGS 0xf8000000 /* later mapped GT_REGS */ -#define CONFIG_SYS_DEV_BASE 0xf0000000 -#define CONFIG_SYS_DEV0_SIZE _64M /* zuma flash @ 0xf000.0000*/ -#define CONFIG_SYS_DEV1_SIZE _8M /* zuma IDE @ 0xf400.0000 */ -#define CONFIG_SYS_DEV2_SIZE _8M /* unused */ -#define CONFIG_SYS_DEV3_SIZE _8M /* unused */ - -#define CONFIG_SYS_DEV0_PAR 0xc498243c - /* c 4 9 8 2 4 3 c */ - /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ - /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */ - /* 11|00|0100|10 01|100|0 00|10 0|100 0|011 1|100 */ - /* 3| 0|.... ..| 1| 4 | 0 | 4 | 8 | 7 | 4 */ - -#define CONFIG_SYS_DEV1_PAR 0xc01b6ac5 - /* c 0 1 b 6 a c 5 */ - /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ - /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */ - /* 11|00|0000|00 01|101|1 01|10 1|010 1|100 0|101 */ - /* 3| 0|.... ..| 1| 5 | 5 | 5 | 5 | 8 | 5 */ - - -#define CONFIG_SYS_8BIT_BOOT_PAR 0xc00b5e7c - -#define CONFIG_SYS_MPP_CONTROL_0 0x00007777 /* GPP[7:4] : REQ0[1:0] GNT0[1:0] */ -#define CONFIG_SYS_MPP_CONTROL_1 0x00000000 /* GPP[15:12] : GPP[11:8] */ -#define CONFIG_SYS_MPP_CONTROL_2 0x00008888 /* GPP[23:20] : REQ1[1:0] GNT1[1:0] */ -#define CONFIG_SYS_MPP_CONTROL_3 0x00000000 /* GPP[31:28] (int[3:0]) */ - /* GPP[27:24] (27 is int4, rest are GPP) */ - -#define CONFIG_SYS_SERIAL_PORT_MUX 0x00001101 /* 11=MPSC1/MPSC0 01=ETH, 0=only MII */ -#define CONFIG_SYS_GPP_LEVEL_CONTROL 0xf8000000 /* interrupt inputs: GPP[31:27] */ - -#define CONFIG_SYS_SDRAM_CONFIG 0xe4e18200 /* 0x448 */ - /* idmas use buffer 1,1 - comm use buffer 1 - pci use buffer 0,0 (pci1->0 pci0->0) - cpu use buffer 1 (R*18) - normal load (see also ifdef HVL) - standard SDRAM (see also ifdef REG) - non staggered refresh */ - /* 31:26 25 23 20 19 18 16 */ - /* 111001 00 111 0 0 00 1 */ - - /* refresh count=0x200 - phy interleave disable (by default, - set later by dram config..) - virt interleave enable */ - /* 15 14 13:0 */ - /* 1 0 0x200 */ - -#define CONFIG_SYS_DEV0_SPACE CONFIG_SYS_DEV_BASE -#define CONFIG_SYS_DEV1_SPACE (CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE) -#define CONFIG_SYS_DEV2_SPACE (CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE) -#define CONFIG_SYS_DEV3_SPACE (CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE) - -/*----------------------------------------------------------------------- - * PCI stuff - */ - -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -/* PCI MEMORY MAP section */ -#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI0_MEM_SIZE _128M -#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000 -#define CONFIG_SYS_PCI1_MEM_SIZE _128M - -#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE) -#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE) - -/* PCI I/O MAP section */ -#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000 -#define CONFIG_SYS_PCI0_IO_SIZE _16M -#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000 -#define CONFIG_SYS_PCI1_IO_SIZE _16M - -#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE) -#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000 -#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE) -#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000 - - -/*---------------------------------------------------------------------- - * Initial BAT mappings - */ - -/* NOTES: - * 1) GUARDED and WRITE_THRU not allowed in IBATS - * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT - */ - -/* SDRAM */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* init ram */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* PCI0, PCI1 memory space (starting at PCI0 base, mapped in one BAT) */ -#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -/* GT regs, bootrom, all the devices, PCI I/O */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ - - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 130 /* max number of sectors on one chip */ - -#define CONFIG_SYS_EXTRA_FLASH_DEVICE DEVICE0 /* extra flash at device 0 */ -#define CONFIG_SYS_EXTRA_FLASH_WIDTH 2 /* 16 bit */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CONFIG_SYS_FLASH_CFI 1 - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sect real size */ -#define CONFIG_ENV_ADDR (0xfff80000 - CONFIG_ENV_SECT_SIZE) - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * L2CR setup -- make sure this is right for your board! - * look in include/74xx_7xx.h for the defines used here - */ - -#define CONFIG_SYS_L2 - -#ifdef CONFIG_750CX -#define L2_INIT 0 -#else -#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ - L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) -#endif - -#define L2_ENABLE (L2_INIT | L2CR_L2E) - -/*------------------------------------------------------------------------ - * Real time clock - */ -#define CONFIG_RTC_DS1302 - - -/*------------------------------------------------------------------------ - * Galileo I2C driver - */ -#define CONFIG_GT_I2C - -#endif /* __CONFIG_H */ |