diff options
Diffstat (limited to 'include/configs/ZPC1900.h')
| -rw-r--r-- | include/configs/ZPC1900.h | 86 |
1 files changed, 34 insertions, 52 deletions
diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h index d3c8eb9..6857973 100644 --- a/include/configs/ZPC1900.h +++ b/include/configs/ZPC1900.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2003 Arabella Software Ltd. + * Copyright (C) 2003-2004 Arabella Software Ltd. * Yuli Barcohen <yuli@arabellasw.com> * * U-Boot configuration for Zephyr Engineering ZPC.1900 board. @@ -33,7 +33,7 @@ #undef DEBUG -#undef CONFIG_BOARD_EARLY_INIT_F /* Don't call board_early_init_f */ +#undef CONFIG_BOARD_EARLY_INIT_F /* Don't call board_early_init_f */ /* Allow serial number (serial) and MAC address (ethaddr) to be overwritten */ #define CONFIG_ENV_OVERWRITE @@ -81,25 +81,25 @@ # define CFG_CPMFCR_RAMTYPE 0 # define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) -#endif /* CONFIG_ETHER_INDEX */ +#endif /* CONFIG_ETHER_INDEX */ #define CONFIG_MII /* MII PHY management */ #define CONFIG_BITBANGMII /* Bit-banged MDIO interface */ /* * GPIO pins used for bit-banged MII communications */ -#define MDIO_PORT 2 /* Port C */ -#define MDIO_ACTIVE (iop->pdir |= 0x00400000) -#define MDIO_TRISTATE (iop->pdir &= ~0x00400000) -#define MDIO_READ ((iop->pdat & 0x00400000) != 0) +#define MDIO_PORT 2 /* Port C */ +#define MDIO_ACTIVE (iop->pdir |= 0x00400000) +#define MDIO_TRISTATE (iop->pdir &= ~0x00400000) +#define MDIO_READ ((iop->pdat & 0x00400000) != 0) -#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ - else iop->pdat &= ~0x00400000 +#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ + else iop->pdat &= ~0x00400000 -#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ - else iop->pdat &= ~0x00200000 +#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ + else iop->pdat &= ~0x00200000 -#define MIIDELAY udelay(1) +#define MIIDELAY udelay(1) #endif /* CONFIG_ETHER_ON_FCC */ @@ -107,35 +107,16 @@ #define CONFIG_8260_CLKIN 66666666 /* in Hz */ #endif -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CFG_CMD_BEDBUG | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DOC | \ - CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_FDC | \ - CFG_CMD_FDOS | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_KGDB | \ - CFG_CMD_MMC | \ - CFG_CMD_NAND | \ - CFG_CMD_PCI | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_REISER | \ - CFG_CMD_SCSI | \ - CFG_CMD_SPI | \ - CFG_CMD_USB | \ - CFG_CMD_VFD | \ - CFG_CMD_XIMG ) ) +#define CONFIG_BAUDRATE 38400 + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_ASKENV \ + | CFG_CMD_DHCP \ + | CFG_CMD_ECHO \ + | CFG_CMD_IMMAP \ + | CFG_CMD_MII \ + | CFG_CMD_PING \ + ) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -153,19 +134,19 @@ #endif #define CONFIG_BZIP2 /* include support for bzip2 compressed images */ -#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ +#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ /* * Miscellaneous configurable options */ #define CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_PROMPT_HUSH_PS2 "> " #define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ @@ -182,6 +163,7 @@ #define CFG_FLASH_BASE 0xFFE00000 #define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER #define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */ @@ -206,11 +188,11 @@ #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /* Hard reset configuration word */ -#define CFG_HRCW_MASTER (HRCW_EBM | HRCW_BPS01 |\ +#define CFG_HRCW_MASTER (HRCW_EBM | HRCW_BPS01| HRCW_CIP |\ HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB010 |\ - HRCW_APPC10 |\ + HRCW_BMS | HRCW_LBPC01 | HRCW_APPC10 |\ HRCW_MODCK_H0101 \ - ) /* 0x14820205 */ + ) /* 0x16828605 */ /* No slaves */ #define CFG_HRCW_SLAVE1 0 #define CFG_HRCW_SLAVE2 0 @@ -228,7 +210,7 @@ #define CFG_RAMBOOT #endif -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ #define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ @@ -238,10 +220,10 @@ #ifdef CFG_ENV_IS_IN_FLASH # define CFG_ENV_SECT_SIZE 0x10000 -# define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE) +# define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #else # define CFG_ENV_ADDR (CFG_EEPROM + 0x400) -# define CFG_ENV_SIZE 0x200 +# define CFG_ENV_SIZE 0x1000 # define CFG_NVRAM_ACCESS_ROUTINE #endif |