diff options
Diffstat (limited to 'include/configs/TQM5200.h')
| -rw-r--r-- | include/configs/TQM5200.h | 229 |
1 files changed, 173 insertions, 56 deletions
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 6b8759f..31e3eed 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -2,7 +2,7 @@ * (C) Copyright 2003-2005 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * (C) Copyright 2004-2005 + * (C) Copyright 2004-2006 * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de * * See file CREDITS for list of people who contributed to this @@ -32,29 +32,47 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ -#define CONFIG_TQM5200 1 /* ... on TQM5200 module */ -#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ -#define CONFIG_STK52XX 1 /* ... on a STK52XX base board */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_TQM5200 1 /* ... on TQM5200 module */ +#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ -#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ +/* On a Cameron or on a FO300 board or ... */ +#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300) +#define CONFIG_STK52XX 1 /* ... on a STK52XX board */ +#endif + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* * Serial console configuration */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#ifdef CONFIG_FO300 +#define CFG_DEVICE_NULLDEV 1 /* enable null device */ +#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* used to detect S1 switch position */ + +#if 0 +#define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED 1 /* silent console on PSC1 when S1 */ + /* switch is closed */ +#endif + +#undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED /* silent console on PSC1 when S1 */ + /* switch is open */ +#endif /* CONFIG_FO300 */ + #ifdef CONFIG_STK52XX #define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ #define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ @@ -96,18 +114,24 @@ /* * Video console */ -#if 1 +#ifndef CONFIG_TQM5200S /* No graphics controller on TQM5200S */ #define CONFIG_VIDEO #define CONFIG_VIDEO_SM501 #define CONFIG_VIDEO_SM501_32BPP #define CONFIG_CFB_CONSOLE #define CONFIG_VIDEO_LOGO -#define CONFIG_VGA_AS_SINGLE_DEVICE + +#ifndef CONFIG_FO300 #define CONFIG_CONSOLE_EXTRA_INFO +#else +#define CONFIG_VIDEO_BMP_LOGO +#endif + +#define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_VIDEO_SW_CURSOR #define CONFIG_SPLASH_SCREEN #define CFG_CONSOLE_IS_IN_ENV -#endif +#endif /* #ifndef CONFIG_TQM5200S */ #ifdef CONFIG_VIDEO #define ADD_BMP_CMD CFG_CMD_BMP @@ -121,7 +145,7 @@ #define CONFIG_ISO_PARTITION /* USB */ -#ifdef CONFIG_STK52XX +#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) #define CONFIG_USB_OHCI #define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE @@ -129,10 +153,12 @@ #define ADD_USB_CMD 0 #endif +#ifndef CONFIG_CAM5200 /* POST support */ #define CONFIG_POST (CFG_POST_MEMORY | \ CFG_POST_CPU | \ CFG_POST_I2C) +#endif #ifdef CONFIG_POST #define CFG_CMD_POST_DIAG CFG_CMD_DIAG @@ -143,7 +169,7 @@ #endif /* IDE */ -#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) +#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) || defined(CONFIG_FO300) #define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2) #else #define ADD_IDE_CMD 0 @@ -176,8 +202,8 @@ #define CONFIG_TIMESTAMP /* display image timestamps */ -#if (TEXT_BASE == 0xFC000000) /* Boot low */ -# define CFG_LOWBOOT 1 +#if (TEXT_BASE != 0xFFF00000) +# define CFG_LOWBOOT 1 /* Boot low */ #endif /* @@ -186,11 +212,49 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ "echo" #undef CONFIG_BOOTARGS +#ifdef CONFIG_STK52XX +# if defined(CONFIG_TQM5200_B) +# if defined(CFG_LOWBOOT) +# define ENV_UPDT \ + "update=protect off FC000000 FC07FFFF;" \ + "erase FC000000 FC07FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC07FFFF\0" +# else /* highboot */ +# define ENV_UPDT \ + "update=protect off FFF00000 FFF7FFFF;" \ + "erase FFF00000 FFF7FFFF;" \ + "cp.b 200000 FFF00000 ${filesize};" \ + "protect on FFF00000 FFF7FFFF\0" +# endif /* CFG_LOWBOOT */ +# else /* !CONFIG_TQM5200_B */ +# define ENV_UPDT \ + "update=protect off FC000000 FC05FFFF;" \ + "erase FC000000 FC05FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC05FFFF\0" +# endif /* CONFIG_TQM5200_B */ +#elif defined (CONFIG_CAM5200) +# define ENV_UPDT \ + "update=protect off FC000000 FC03FFFF;" \ + "erase FC000000 FC03FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC03FFFF\0" +#elif defined (CONFIG_FO300) +# define ENV_UPDT \ + "update=protect off FC000000 FC05FFFF;" \ + "erase FC000000 FC05FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC05FFFF\0" +#else +# error "Unknown Carrier Board" +#endif /* CONFIG_STK52XX */ + #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ @@ -200,18 +264,18 @@ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ - "flash_self=run ramargs addip;" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=ttyS0,${baudrate}\0" \ + "flash_self=run ramargs addip addcons;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip;" \ + "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \ + "bootm\0" \ "bootfile=/tftpboot/tqm5200/uImage\0" \ - "load=tftp 200000 ${u-boot}\0" \ "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ - "update=protect off FC000000 FC05FFFF;" \ - "erase FC000000 FC05FFFF;" \ - "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 FC05FFFF\0" \ + "load=tftp 200000 ${u-boot}\0" \ + ENV_UPDT \ "" #define CONFIG_BOOTCOMMAND "run net_nfs" @@ -283,45 +347,87 @@ /* * Flash configuration */ -#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */ +#define CFG_FLASH_BASE 0xFC000000 -/* use CFI flash driver if no module variant is spezified */ +/* use CFI flash driver */ #define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ #define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ #define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } #define CFG_FLASH_EMPTY_INFO #define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ #define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ -#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 + +#if defined (CONFIG_CAM5200) +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000) +#elif defined(CONFIG_TQM5200_B) +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00080000) +#else +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) +#endif -#if !defined(CFG_LOWBOOT) -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000) -#else /* CFG_LOWBOOT */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) -#endif /* CFG_LOWBOOT */ #define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks (= chip selects) */ -#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ /* Dynamic MTD partition support */ #define CONFIG_JFFS2_CMDLINE #define MTDIDS_DEFAULT "nor0=TQM5200-0" -#define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + +#ifdef CONFIG_STK52XX +# if defined(CONFIG_TQM5200_B) +# if defined(CFG_LOWBOOT) +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:1m(firmware)," \ + "1536k(kernel)," \ + "3584k(small-fs)," \ + "2m(initrd)," \ + "8m(misc)," \ + "16m(big-fs)" +# else /* highboot */ +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:2560k(kernel)," \ + "3584k(small-fs)," \ + "2m(initrd)," \ + "8m(misc)," \ + "15m(big-fs)," \ + "1m(firmware)" +# endif /* CFG_LOWBOOT */ +# else /* !CONFIG_TQM5200_B */ +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ "1408k(kernel)," \ "2m(initrd)," \ "4m(small-fs)," \ - "16m(big-fs)," \ - "8m(misc)" + "8m(misc)," \ + "16m(big-fs)" +# endif /* CONFIG_TQM5200_B */ +#elif defined (CONFIG_CAM5200) +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:768k(firmware)," \ + "1792k(kernel)," \ + "3584k(small-fs)," \ + "2m(initrd)," \ + "8m(misc)," \ + "16m(big-fs)" +#elif defined (CONFIG_FO300) +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + "1408k(kernel)," \ + "2m(initrd)," \ + "4m(small-fs)," \ + "8m(misc)," \ + "16m(big-fs)" +#else +# error "Unknown Carrier Board" +#endif /* CONFIG_STK52XX */ /* * Environment settings */ #define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SIZE 0x4000 /* 16 k - keep small for fast booting */ +#if defined(CONFIG_TQM5200_B) +#define CFG_ENV_SECT_SIZE 0x40000 +#else #define CFG_ENV_SECT_SIZE 0x20000 +#endif /* CONFIG_TQM5200_B */ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) /* * Memory map @@ -349,8 +455,15 @@ # define CFG_RAMBOOT 1 #endif -#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ -#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */ +#if defined (CONFIG_CAM5200) +# define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#elif defined(CONFIG_TQM5200_B) +# define CFG_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */ +#else +# define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +#endif + +#define CFG_MALLOC_LEN (1024 << 10) /* Reserve 1024 kB for malloc() */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* @@ -371,15 +484,18 @@ * use ALT CAN position: Bits 2-3 (mask: 0x30000000): * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. - * Use for REV200 STK52XX boards. Do not use with REV100 modules - * (because, there I2C1 is used as I2C bus) + * Use for REV200 STK52XX boards and FO300 boards. Do not use + * with REV100 modules (because, there I2C1 is used as I2C bus) * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030) * 000 -> All PSC2 pins are GIOPs * 001 -> CAN1/2 on PSC2 pins * Use for REV100 STK52xx boards + * 01x -> Use AC97 + * use PSC3: Bits 20-23 (mask: 0x00000f00) + * 1100 -> UART/SPI (on FO300 board) * use PSC6: - * on STK52xx: + * on STK52xx and FO300: * use as UART. Pins PSC6_0 to PSC6_3 are used. * Bits 9:11 (mask: 0x00700000): * 101 -> PSC6 : Extended POST test is not available @@ -401,6 +517,8 @@ # define CFG_GPS_PORT_CONFIG 0x91500004 # endif # endif +#elif defined (CONFIG_FO300) +# define CFG_GPS_PORT_CONFIG 0x91502c24 #else /* TMQ5200 Inbetriebnahme-Board */ # define CFG_GPS_PORT_CONFIG 0x81000004 #endif @@ -411,6 +529,8 @@ #if defined (CONFIG_STK52XX) && !defined (CONFIG_STK52XX_REV100) # define CONFIG_RTC_M41T11 1 # define CFG_I2C_RTC_ADDR 0x68 +# define CFG_M41T11_BASE_YEAR 1900 /* because Linux uses the same base + year */ #else # define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ #endif @@ -420,6 +540,10 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#define CFG_PROMPT_HUSH_PS2 "> " + #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -466,32 +590,25 @@ #define CFG_CS0_START CFG_FLASH_BASE #define CFG_CS0_SIZE CFG_FLASH_SIZE -/* automatic configuration of chip selects */ -#ifdef CONFIG_CS_AUTOCONF #define CONFIG_LAST_STAGE_INIT -#endif /* * SRAM - Do not map below 2 GB in address space, because this area is used * for SDRAM autosizing. */ -#if defined (CONFIG_CS_AUTOCONF) #define CFG_CS2_START 0xE5000000 #define CFG_CS2_SIZE 0x100000 /* 1 MByte */ #define CFG_CS2_CFG 0x0004D930 -#endif /* * Grafic controller - Do not map below 2 GB in address space, because this * area is used for SDRAM autosizing. */ -#if defined (CONFIG_CS_AUTOCONF) #define SM501_FB_BASE 0xE0000000 #define CFG_CS1_START (SM501_FB_BASE) #define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ #define CFG_CS1_CFG 0x8F48FF70 #define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000 -#endif #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ |