diff options
Diffstat (limited to 'include/configs/TQM5200.h')
| -rw-r--r-- | include/configs/TQM5200.h | 88 |
1 files changed, 55 insertions, 33 deletions
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 87bcc5b..a5a6344 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -1,8 +1,8 @@ /* - * (C) Copyright 2003-2004 + * (C) Copyright 2003-2005 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * (C) Copyright 2004 + * (C) Copyright 2004-2005 * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de * * See file CREDITS for list of people who contributed to this @@ -35,6 +35,7 @@ #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ #define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ +#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ #define CONFIG_STK52XX 1 /* ... on a STK52XX base board */ #define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ @@ -62,7 +63,6 @@ #define CONFIG_BOARD_EARLY_INIT_R #endif /* CONFIG_STK52XX */ -#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */ /* * PCI Mapping: * 0x40000000 - 0x4fffffff - PCI Memory @@ -70,9 +70,6 @@ */ #ifdef CONFIG_STK52XX #define CONFIG_PCI 1 -#elif -#define CONFIG_PCI 0 -#endif #define CONFIG_PCI_PNP 1 /* #define CONFIG_PCI_SCAN_SHOW 1 */ @@ -89,21 +86,37 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#ifdef CONFIG_STK52XX +#ifdef CONFIG_PCI #define ADD_PCI_CMD CFG_CMD_PCI -#elif +#else #define ADD_PCI_CMD 0 #endif -#else /* MPC5100 */ - -#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ +/* + * Video console + */ +#if 1 +#define CONFIG_VIDEO +#define CONFIG_VIDEO_SM501 +#define CONFIG_VIDEO_SM501_32BPP +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_LOGO +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_CONSOLE_EXTRA_INFO +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_SPLASH_SCREEN +#endif +#ifdef CONFIG_VIDEO +#define ADD_BMP_CMD CFG_CMD_BMP +#else +#define ADD_BMP_CMD 0 #endif /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION /* USB */ #ifdef CONFIG_STK52XX @@ -138,6 +151,7 @@ * Supported commands */ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + ADD_BMP_CMD | \ ADD_IDE_CMD | \ ADD_PCI_CMD | \ ADD_USB_CMD | \ @@ -173,7 +187,7 @@ #undef CONFIG_BOOTARGS #if defined (CONFIG_TQM5200_AA) -# define CONFIG_U_BOOT_SUFFIX "-AA" +# define CONFIG_U_BOOT_SUFFIX "-AA\0" #elif defined (CONFIG_TQM5200_AB) # define CONFIG_U_BOOT_SUFFIX "-AB\0" #elif defined (CONFIG_TQM5200_AC) @@ -227,10 +241,10 @@ * I2C configuration */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#if defined (CONFIG_MINIFAP) -#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ +#ifdef CONFIG_TQM5200_REV100 +#define CFG_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */ #else -#define CFG_I2C_MODULE 1 /* Select I2C module #1 or #2 */ +#define CFG_I2C_MODULE 2 /* Select I2C module #2 for all other revs */ #endif /* @@ -288,8 +302,9 @@ #define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ #define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } #define CFG_FLASH_EMPTY_INFO -#define CFG_FLASH_SIZE 0x02000000 /* 32 MByte */ -#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ +#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ +#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */ #if !defined(CFG_LOWBOOT) #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000) @@ -357,27 +372,33 @@ * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1): * Bit 0 (mask: 0x80000000): 1 * use ALT CAN position: Bits 2-3 (mask: 0x30000000): - * 00 -> No Alternatives, I2C1 is used for onboard EEPROM - * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1 do not use on TQM5200 with onboard - * EEPROM + * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. + * Set for rev 100 modules with an onboard EEPROM (because, + * there I2C1 is used as I2C bus) + * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. + * Set for rev 200 modules * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 * use PSC6: * on STK52xx: - * use as UART. Pins PSC6_0 to PSC6_3 are used. - Bits 9:11 (mask: 0x00700000): + * use as UART. Pins PSC6_0 to PSC6_3 are used. + * Bits 9:11 (mask: 0x00700000): * 101 -> PSC6 : Extended POST test is not available * on MINI-FAP and TQM5200_IB: - * use PSC6_1 and PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000): - * 011 -> PSC6 could not be used as UART or CODEC. IrDA still possible. - * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST - * tests. + * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000): + * 000 -> PSC6 could not be used as UART, CODEC or IrDA + * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST + * tests. */ #if defined (CONFIG_MINIFAP) -#define CFG_GPS_PORT_CONFIG 0x91300004 +# define CFG_GPS_PORT_CONFIG 0x91000004 #elif defined (CONFIG_STK52XX) -#define CFG_GPS_PORT_CONFIG 0x81500004 -#else -#define CFG_GPS_PORT_CONFIG 0x81300004 +# if defined (CONFIG_TQM5200_REV100) +# define CFG_GPS_PORT_CONFIG 0x81500004 +# else +# define CFG_GPS_PORT_CONFIG 0x91500004 +# endif +#else /* TMQ5200_IP */ +# define CFG_GPS_PORT_CONFIG 0x81000004 #endif /* @@ -461,14 +482,15 @@ */ #if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \ defined (CONFIG_CS_AUTOCONF) -#define CFG_CS1_START 0xE0000000 +#define SM501_FB_BASE 0xE0000000 +#define CFG_CS1_START (SM501_FB_BASE) #define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ #define CFG_CS1_CFG 0x8F48FF70 #define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000 #endif #define CFG_CS_BURST 0x00000000 -#define CFG_CS_DEADCYCLE 0x33333333 +#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ #define CFG_RESET_ADDRESS 0xff000000 @@ -493,7 +515,7 @@ #define CONFIG_IDE_PREINIT #define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ +#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ #define CFG_ATA_IDE0_OFFSET 0x0000 |